• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.295-309
• /
• 2019

본 논문은 신재생을 배전계통에 추가 수용하기 위해 배전계통의 접속허용기준을 상향하여 운전하는 방안을 검토하고 실증한 결과를 분석하는 내용을 다룬다. 대한민국의 배전계통의 경우, 일반적인 공용배전선로는 최대 10 MVA까지 신재생이 접속할 수 있도록 규정하고 있으며 신재생으로 인해 발생하는 역조류에 의해 계통전압이 전기사업법에서 지정한 범위를 초과하지 않아야 한다. 그러나 배전계통에 상시 존재하는 최소부하 및 발전원의 발전 특성에 따라 신재생을 추가 접속할 수 있는 여유용량이 존재할 수 있음을 고려해야 한다. 따라서 배전계통의 접속허용용량 기준 상향 검토를 위해, 신재생이 접속허용한도인 10 MVA만큼 최대한 접속된 상황에서 모든 신재생이 배전계통운영자에 의해 감시되고 있는 배전선로를 선정하여 단계적인 추가 접속을 시행하였다. 신재생으로 인한 배전계통의 전력조류와 전압 프로파일 영향을 분석함으로써 현재의 기준을 초과하여 신재생을 접속 시킬 때 발생 가능한 계통영향 분석과 더불어 향후 고려해야할 요인을 정의한다.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.19-29
• /
• 2019

Recently, with the rise of environmental issues and the change of government policy (Renewable Energy 3020 Implementation Plan), a large amount of renewable energy such as solar and wind power is connected to the power system, and most of the renewable energy is concentrated in the power distribution network. This causes many problems with the voltage management and the protection coordination of the grid due to the its intermittent power generation. In order to effectively operate the distribution network, it is necessary to deploy more intelligent terminal devices in the field to measure the status of the distribution network and develop various operation functions such as visualization and big data analysis to support the power distribution system operators. In addition, the failover technology must be supported for the non-stop operation of the power distribution system. This paper proposes the system architecture of new power distribution management system to cope with high penetration of renewable energy. To verify the proposed system architecture, the functional unit test and performance measurement were performed.

• 한국정보전자통신기술학회논문지
• /
• 제15권2호
• /
• pp.95-102
• /
• 2022

신재생에너지 확대를 위한 배전자동화시스템의 안정성 평가를 위한 연구이다. 정부는 재생에너지 3020 이행계획 정책을 통해 2030년까지 신재생에너지를 확대하여 국민의 삶의 질을 높이는 참여형 에너지 체계로 전환할 계획이다. 정부는 2030년까지 재생에너지 발전량 비중을 국내 보급 에너지의 20%로 목표 설정하였다. 신규 설비용량의 95% 이상을 태양광 풍력 등 청정에너지로 설립할 계획이다. 재생에너지 보급 확대로 에너지 신사업과 분산전원 산업이 육성되어 과거의 대규모 전원 개발이 아닌 근거리, 저압, 소규모 발전이 급속히 확대되었다. 이런 수요로 인해 배전 설비 운영의 중요성이 대두 되었고 배전자동화시스템이 필요성 증대되고 있다. 본 논문에서는 배전자동화시스템의 성능 및 기능 평가를 위한 배전시뮬레이터 개발에 대해 다루었고 이와 배전자동화시스템과의 연동시험 결과를 제시한다. 배전계통에 진보된 시스템을 도입하기 위해서는 송변전시스템의 장점을 취해야 한다. 배전시스템에서 DNP3.0프로토콜을 사용하고 송배전시스템에서 IEC61850 프로토콜을 사용한다. 이 두 프로토콜을 배전자동화시스템에서 혼용하여 사용시 제어, 모니터링 등의 운영에 대한 기능과 성능을 충족한다는 결론을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1618-1637
• /
• 2014

Clustering wireless sensor network is an efficient way to reduce the energy consumption of individual nodes in a cluster. In clustering, multihop routing techniques increase the load of the Cluster head near the sink. This unbalanced load on the Cluster head increases its energy consumption, thereby Cluster heads die faster and create an energy hole problem. In this paper, we propose an Energy Balancing Cluster Head (EBCH) in wireless sensor network. At First, we balance the intra cluster load among the cluster heads, which results in nonuniform distribution of nodes over an unequal cluster size. The load received by the Cluster head in the cluster distributes their traffic towards direct and multihop transmission based on the load distribution ratio. Also, we balance the energy consumption among the cluster heads to design an optimum load distribution ratio. Simulation result shows that this approach guarantees to increase the network lifetime, thereby balancing cluster head energy.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.97-106
• /
• 2018

Background: A cargo container scanner using a high-energy X-ray generates a fan beam X-ray to acquire a transmitted image. Because the generated X-rays by LINAC may affect the image quality and radiation protection of the system, it is necessary to acquire accurate information about the generated X-ray beam distribution. In this paper, a diode-based multi-channel spatial dose measuring device for measuring the X-ray dose distribution developed for measuring the high energy X-ray beam distribution of the container scanner is described. Materials and Methods: The developed high-energy X-ray spatial dose distribution measuring device can measure the spatial distribution of X-rays using 128 diode-based X-ray sensors. And precise measurement of the beam distribution is possible through automatic positioning in the vertical and horizontal directions. The response characteristics of the measurement system were evaluated by comparing the signal gain difference of each pixel, response linearity according to X-ray incident dose change, evaluation of resolution, and measurement of two-dimensional spatial beam distribution. Results and Discussion: As a result, it was found that the difference between the maximum value and the minimum value of the response signal according to the incident position showed a difference of about 10%, and the response signal was linearly increased. And it has been confirmed that high-resolution and two-dimensional measurements are possible. Conclusion: The developed X-ray spatial dose measuring device was evaluated as suitable for dose measurement of high energy X-ray through confirmation of linearity of response signal, spatial uniformity, high resolution measuring ability and ability to measure spatial dose. We will perform precise measurement of the X-ray beamline in the container scanning system using the X-ray spatial dose distribution measuring device developed through this research.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1803-1805
• /
• 1998

Electron temperature, electron density and electron energy distribution function were measured in Radio-Frequency Inductively Coupled Plasma(RFICP) using a probe method. Measurements were conducted in argon discharge for pressure from 10 mTorr to 40 mTorr and input rf power from 100W to 600W and flow rate from 3 sccm to 12 sccm. Spatial distribution electron temperature and electron density and electron energy distribution function were measured for discharge with same aspect ratio(R/L=2). Electron temperature was found to depend on pressure, but only weakly on power. Electron density and electron energy distribution function strongly depended on both pressure and power. Electron density and electron energy distribution function increased with increasing flow rate. Radial distribution of the electron density and electron energy distribution function were peaked in the plasma center. Normal distribution of the electron density electron energy distribution function were peaked in the center between quartz plate and substrate. These results were compared to a simple model of ICP, then we found out the generation mechanism of Radio-Frequency Inductively Coupled Plasma.

• 조명전기설비학회논문지
• /
• 제13권4호
• /
• pp.82-86
• /
• 1999

본 연구에서는 푸로브법과 교류중첩법을 이용하여 고주파 유도결합 플라즈마에서 전자에너지 분포함수를 측정하였다. 실험조건은 압력 10∼40[mTorr], 입력파워는 100∼600[W]이고, 가스유량은 3∼12[sccm]이며, 전자에너지 분포함수의 공간분포 측정에 있어서 아스펙트비(R/L)는 2로 하였다. 전자에너지 분포함수는 압력 및 입력파워에 대하여 강한 의존성을 나타내었고, 가스유량이 증가할수록 증가 하였다. 전자에너지 분포함수의 반경방향 분포는 플라즈마 중심에서 최대가 되었다. 전자에너지 분포함수의 축방향 분포는 석영창과 기판 사이의 중심에서 최대가 되었다. 이러한 결과는 고주파 유도결합 플라즈마의 생성 메커니즘 이해와 간단한 ICP(Inductively Coupled Plasma) 모델링 응용에 기여할 수 있을 것이다.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.93-99
• /
• 2021

The government has proposed a mission to enhance intelligent power networks, decrease coal-fired generation, expand distributed energy resources, and promote energy prosumer into the distribution network in Korea. Installation cost of facility expansion to guaranteed interconnection with small distributed energy resources increases dramatically on KEPCO's distribution sector. And it is hard to withdraw in time. In addition, there are explicit research is required to meet the reliability on grid corresponding to the increase of distributed power. Infrastructure support for accommodating energy prosumer is also needed. Therefore, KEPCO is pushing transition to DSO by expanding distribution management scope and changing its roles. In addition, KEPCO is proactively preparing for integrated operation between distribution network and existing distributed power which is accommodated passively. KEPCO is also trying to accept multiple network users, e.g. building platforms, to manage a data and promote new markets. In the long term, transition to DSO will achieve saving investment costs for accommodating distributed sources and maintaining stable electrical quality. And it will be possible to create new business model using the platform to secure revenue.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.444-450
• /
• 2013

The distribution performance of refrigerant distributors in air conditioner evaporators was examined numerically and experimentally. Internal flow analysis of the distributor by CFD found that the distance from the socket to the cone, the angle of the cone and the base area of the cone were the most important factors affecting refrigerant distribution ability and vortex creation. To enhance distribution performance, two distributors with improved internal structures were designed. To test these new structures, distribution performance was also analyzed by CFD and an empirical experiment was carried out using the water-nitrogen. Experimental results on the distribution fraction of each distributor hole showed a good agreement with the results of the CFD analysis. Thus, the new design of the distributors enhanced distribution performance of the refrigerant distributors.

• 유통과학연구
• /
• 제14권5호
• /
• pp.17-26
• /
• 2016

Purpose - The E-convergence economy is requested with the economic change of the diverse energy supplies, according to the exploits of Shale gas. By analyzing the electric energy supply and demand in accordance with the various cases, it has proved indirectly to create a convergence economy. Research design, data, and methodology - The research design would make realize its potential change with which government or companies have focused on the energy objection between Shale gas and Electric vehicles. Results - The paper suggests that Shale gas has expanded with the emphasis on the Electrical convergence economy or EVs. Due to these results, they also show why it should not be delayed in the development of shale gas and electric vehicles at the same time. Conclusions - All this is from the reason of opening the E-convergence economy over time. It is required that Korea should prepare E-convergence economy. Public regional energy should be present through the consistent selection of development for energy linking E-economy and E-trans distribution.