Browse > Article
http://dx.doi.org/10.17661/jkiiect.2022.15.2.95

A study on the development of distribution simulator and simulation results for use in distribution automation system of IEC 61850 protocol  

Kim, Jae-Hong (Development Center)
Oh, Jae-Gon (Tech University of Korea)
Publication Information
The Journal of Korea Institute of Information, Electronics, and Communication Technology / v.15, no.2, 2022 , pp. 95-102 More about this Journal
Abstract
It is a study for the evaluation of the stability of the distribution automation system for the expansion of renewable energy. Through the Renewable Energy 3020 Implementation Plan, the government plans to expand new renewable energy and convert it to participatory energy that improves the quality of life of the people by 2030. The government has set a target of 20% of domestic supply energy for renewable energy generation by 2030. It is planning to establish more than 95 percent of its new facilities with clean energy such as solar power and wind power. By expanding the supply of renewable energy, new energy businesses and distributed power industry were fostered, and short-distance, low-voltage, and small-scale power generation were rapidly expanded rather than large-scale power development in the past. Due to this demand, the importance of power distribution facility operation has emerged and the need for distribution automation system is increasing. This paper discusses the development of a power distribution simulator for the performance and function evaluation of power distribution automation systems and presents the results of an interlocking test with the power distribution automation system. In order to introduce an advanced system into the power distribution system, it is necessary to take advantage of the transmission and distribution system. The DNP3.0 protocol is used in the distribution system and the IEC61850 protocol is used in the transmission and distribution system. It was concluded that the functions and performance of operations were satisfied when these two protocols are mixed and used in the distribution automation system.
Keywords
DAS; DNP 3.0; IEC 61850; Distribution automation system; Intelligent distribution management system;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 IEC, "IEC61968-Part 1, Part 2, Par 3". 2018.
2 Sang-UK Yeo,"Network Performance Verification for Next-Generation Power Distribution Management System Using FRTU Simulator" The Korea Information Electron Communication Technology. 20-12,Vol.13 No.6
3 Sung-Ho Hwang, "GOOSE Traffic Generator Using Network Emulation", The Journal of The Institute of Internet, Broadcasting and Communication (IIBC), Vol. 16, No. 1, pp.209-214,2016.2.DOI: http://dx.doi.org/10.7236/JIIBC.2016.16.1.209   DOI
4 Kim, Myung - Soo, "Research on Conceptual Design of the Next-generation Distribution Management System", A Study on the Next-Generation DMS Construction Plan (Final Report), '16 Electric Power Research-So, 2019.
5 Mohagheghi S., Mousavi M., Stoupis J. Wang Z."Modeling distribution automation system componentsusing IEC 61850 ", Power & Energy Society General Meeting, 2009. PES '09. IEEE
6 "Distribution automation practice", Korea Electric Power Corporation distribution office . 2019.
7 Bok-Nam Ha, Seong-Woo Lee, Chang-Hoon Shin, So-Young Park, "Development of distribution automation technology Current Status and Prospect", Korean Institute of Electrical Engineers Summer Conference, 2008. Trans. KIEE. Vol. 60, No. 4, APR,2011
8 Kepco-KDN online: https://www.kdn.com/menu.kdnmid=a10203250700 accessed on 2021.