• 한국수소및신에너지학회논문집
• /
• 제8권4호
• /
• pp.173-180
• /
• 1997

The Mechanically Alloyed $Ti_{0.7}Mg_{0.3}Ni$ was investigated as a function of milling time by X-ray diffraction, SEM(scanning electron microscope), EDS(energy dispersive spectrometer), P-C-Isotherm curves. After 10hrs milling, mixed $Ti_{0.7}Mg_{0.3}Ni$ powders were changed to amorphous phase. And amorphous $Ti_{0.7}Mg_{0.3}Ni$ alloys became TiNi phase crystalline after heat treatment at 873K in a vacuum for 1 hour. The hydrogen absorption capacity of the annealed $Ti_{0.7}Mg_{0.3}Ni$ alloy increased as a function of mechanical alloying time.

• 분석과학
• /
• 제8권3호
• /
• pp.293-298
• /
• 1995

수용액에서 pH와 일정공급전위 변화에 따른 강철심에 도금된 놋쇠의 안정성을 교류 임피던스로 측정하여 연구하였다. 일정 pH에서 일정공급전위가 양전위로 감에 따라 코팅기공저항은 감소된다. 그 사실은 일정공급전위가 양전위로 감에 따라 도금된 놋쇠층이 용액에 더 용해됨을 나타낸다. 강철심에 도금된 놋쇠의 안정성은 pH=7.1 > pH=4.0 > pH=10.0 순으로 감소한다. 위와 같은 실험결과는 전자현미경 (SEM)/에너지분산분광계(EDS)의 자료에 의해 증명된다.

• 대한가정학회지
• /
• 제41권8호
• /
• pp.55-62
• /
• 2003

Natural dyes generally fan into two categories; organic dyes coming from animals and plants and inorganic dyes obtained from various minerals such as bengala, loess, ultramarine, prussian blue and etc. The main components of volcanic ash is clay mineral such as kaolinite, illite, quartz. Clay minerals Composing volcanic ash are kaolinite［$Al_4Si_4O_{10}{(OH)_{8}}$］, illite［$K_{X}Al_2(Si,\;Al)_4O_{10}{(OH)}_2$］, quartz［$SiO_2$］, homblende［$Na_{0-1}\;Ca_2{(Mg,\;Fe,\;Al)}_5{(Si,\;Al)}_{8}O_{22}{(OH)}_2$］and etc. And the redish color mainly comes from iron oxide. In this paper, two different classes of dyeing process were tested; dyeing with volcanic ash only and cationic agent pre-treatment followed by dyeing with volcanic ash. The compositions of the volcanic ash powder and the volcanic ash deposited on the cotton knitted fabrics identified by energy dispersive spectrometer and XRD analysis. The major chemical components of volcanic ash deposited on the cotton knitted fabrics were confirmed to be the saicon oxide, iron oxide, and aluminum oxide and etc. According to the analysis by XRD and EDS-SEM, kaolinite, illite and quartz were also identified.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.39-43
• /
• 2013

Titanium has been used to satisfy various applications such as bio engineering, aerospace, electronics, automobile. Recently, micro fabrication technologies of metals such as titanium have been required to satisfy many conditions in various fields. To satisfy these demands, micro electrochemical process using laser marking can be an alternative method because it is one of the precision machining and efficient process. Micro electrochemical process using laser marking needs to accomplish form of the oxidized recast layer on metal surface by laser marking. The laser beam marking conditions such as average power, pulse repetition rate and marking speed should be properly selected to form oxidized recast layer. So, the characteristics of titanium surface according to laser marking conditions was investigated through SEM(scanning electron microscope), EDS(energy dispersive spectrometer) and surface roughness analysis.

• 대한소아치과학회지
• /
• 제46권1호
• /
• pp.101-110
• /
• 2019

이 연구는 정중 과잉치 법랑질의 구조학적 및 형태학적 특징에 대하여 주사형 전자현미경(FE-SEM)과 에너지 분산형 분광분석법(EDS)을 이용하여 관찰하고 영구 중절치와 유중절치의 법랑질 구조 및 형태와 차이점에 대하여 평가하고자 하였다. 15개의 정중 과잉치, 영구 중절치와 유중절치를 이용하였으며, 법랑질의 두께와 법랑소주 직경에 대하여 FE-SEM을 이용하여 측정 및 관찰하고, 성분 분석을 위하여 EDS를 이용하였다. 그 결과 법랑소주 두께의 경우 영구 중절치, 정중 과잉치, 유중절치 순으로 나타났다. 법랑소주의 직경의 경우 영구중절치와 정중 과잉치에서는 유의할 만한 차이가 없었으며, 유중절치는 두 그룹에 비해서 작게 나타났다. 성분 분석 시 칼슘의 경우 영구 중절치와 정중 과잉치에 있어서 통계적 유의성이 없었으며, 유중절치는 작게 나타났다. Ca/P ratio의 경우 정중 과잉치와 영구 중절치는 비슷한 수치를 나타내며 통계적 유의성이 없었고, 유중절치보다는 두 그룹 모두 높게 나타났다. Ca/C ratio의 경우 마찬가지로 정중 과잉치와 영구 중절치에서 유중절치보다 높게 나타났다. 이를 통하여 정중 과잉치의 법랑질 특성은 유중절치보다는 영구 중절치와 더 유사함을 알 수 있고, 임상적으로 정중 과잉치의 활용 시 영구 중절치와 비슷한 법랑질 성질을 지님을 유추할 수 있다.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.145-153
• /
• 2012

Purpose: The purpose of this study was to investigate to effect of the electro-polishing condition according to electrolyte temperature and current and polishing time on surface morphology and composition by scanning electron microscopy(SEM) and energy dispersive X-ray spectrometer(EDS) in dental casting Co-Cr-Mo alloys. Methods: 16 specimens were divided into 4 groups which have each 4 specimens. The size of specimens were 10mm wide and 5mm height. the electro-polishing of specimens are by polishing solution temperature and times in Co-Cr-Mo alloy by SEM and EDS analysis. Results: The results shows that most smooth surface is obtained when electro-polishing is performed at $49^{\circ}C$ for 30-40sec with electro gap of 10mm and 8 voltage. Conclusion: The morphologies of specimens after electro-polishing were scratch absent and significant between at $40^{\circ}C$ for 45sec and at $49^{\circ}C$ for 45sec.

• 상하수도학회지
• /
• 제28권5호
• /
• pp.589-600
• /
• 2014

Tuberculation and slime accumulated in water mains play an important role in modifying water quality of drinking water. Therefore, in this study, it was investigated that what materials were accumulated, and what components were included in the tuberculation and slime of water mains. The Various tuberculation and slime sample were collected from the 12 water mains to analyze their physical and chemical properties and crystal structure. As a analysis method, VSS(Volatile suspended solid), SEM(scanning electron microscope), EDS(Energy Dispersive X-ray spectroscope), ICP(Inductively Coupled Plasma Mass Spectrometer) and XRD(X-Ray Diffractomete) were used. The results of analysis on the samples, the representative materials were verified such as iron corrosion products, the fine sand particles generated during backwash, fine particles of activated carbon, aluminum used in coagulation process, and manganese included in raw water.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• 한국표면공학회지
• /
• 제50권6호
• /
• pp.498-503
• /
• 2017

The aim of the present study is to evaluate electrochemical corrosion characteristics of base metal and weldment of Al-Mg alloy in seawater solution. The specimen was 5mm thick 5083-H321 Al alloy plate which was butt-welded using gas metal arc welding (GMAW). To identify the types of inclusions in the weldment, the microstructural observation was performed along with Energy dispersive spectrometer (EDS) analysis. The anodic polarization experiments were performed to evaluate the corrosion characteristics. After the anodic polarization test, the corroded surface was observed by SEM(scanning electron microscope) and EDS. The result of the analysis revealed a large number of voids in the weldment, especially coarse grains and inclusions in the heat affected zone. The corrosion current density of the weldment was found to be approximately 13 times higher than that of the base metal, indicating lower corrosion resistance of the weldment due to the defects in the weldment and the heat affected zone.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.576-577
• /
• 2005

In this paper, the oxidization characteristics were analyzed according to the shapes of Residual Current Protective Device(RCD) contacts. RCD is an electrical safety device specially designed to immediately switch the electricity off when electric leakage is detected at a level harmful to a person using electrical equipment. The shapes of RCD contacts are a little bit different according to the models. When RCD is turned on, stationary and moving contact do not fit together. So, it can cause the increase of contact resistance. To discover the deterioration characteristics of RCD contacts by switching repetition, the contacts were analyzed by stereo microscope, Scanning Electron Microscope(SEM) and Energy Dispersive X-ray Spectrometer(EDS).