The optical characterization of self-assembled InAs/AlAs Quantum Dots(QD) grown by MBE(Molecular Beam Epitaxy) was investigated by using Photoluminescence(PL) spectroscopy. The influence of thin AlAs barrier on QDs were carried out by utilizing a pumping beam that has lower energy than that of the AlAs barrier. This provides the evidence for the tunneling of carriers from the GaAs layer, which results in a strong QD intensity compared to the GaAs at the 16 K PL spectrum. The presence of two QDs signals were found to be associated with the ground-states transitions from QDs with a bimodal size distribution made by the excitation power-dependent PL. From the temperature-dependent PL, the rapid red shift of the peak emission that was related to the QD2 from the increasing temperature was attributed to the coherence between the QDs of bimodal size distribution. A red shift of the PL peak of QDs emission and the reduction of the FWHM(Full Width at Half Maximum) were observed when the annealing temperatures ranged from 500 $^{\circ}C$ to 750 $^{\circ}C$, which indicates that the interdiffusion between the dots and the capping layer was caused by an improvement in the uniformity size of the QDs.
Pit and rim formation on the Acrylonitrile Butadiene Styrene(ABS) plastic surface was evaluated after it was irradiated by $CO_2$ and Nd:YAG laser beams. Our results show that thermal effect floor was well observed at the outer wall of pit with $CO_2$ laser irradiated while it was not the case with Nd:YAG laser irradiated. Also the volume and depth of pit formation increase proportionally with the energy intensities of two laser irradiations, but there are significant differences in the slope, width, and FWHM of the Pit formation with two types of laser irradiations. This result shows that $CO_2$ laser irradiation leads to better cooling contraction effect while Nd:YAG laser irradiation induces better recoil pressure effect during the interaction between ABS plastic and laser beam irradiation. The shape of the laser marking could vary significantly depending on the traveling path of molten plastic during injection molding of ABS plastic. Therefore, the selection of material and molding process can have a great impact on the performance of optical storage media.
Khalid, Mahmood;Asghar, Muhammad;Ali, Adnan;Ajaz-Un-Nabi, M.;Arshad, M. Imran;Amin, Nasir;Hasan, M.A.
Advances in Energy Research
/
제3권2호
/
pp.117-124
/
2015
In this paper, we have reported an enhancement in thermoelectric properties of un-doped zinc oxide (ZnO) grown by molecular beam epitaxy (MBE) on silicon (001) substrate by annealing treatment. The grown ZnO thin films were annealed in oxygen environment at $500^{\circ}C-800^{\circ}C$, keeping a step of $100^{\circ}C$ for one hour. Room temperature Seekbeck measurements showed that Seebeck coefficient and power factor increased from 222 to $510{\mu}V/K$ and $8.8{\times}10^{-6}$ to $2.6{\times}10^{-4}Wm^{-1}K^{-2}$ as annealing temperature increased from 500 to $800^{\circ}C$ respectively. This observation was related with the improvement of crystal structure of grown films with annealing temperature. X-ray diffraction (XRD) results demonstrated that full width half maximum (FWHM) of ZnO (002) plane decreased and crystalline size increased as the annealing temperature increased. Photoluminescence study revealed that the intensity of band edge emission increased and defect emission decreased as annealing temperature increased because the density of oxygen vacancy related donor defects decreased with annealing temperature. This argument was further justified by the Hall measurements which showed a decreasing trend of carrier concentration with annealing temperature.
In this work, narrow-band green-emitting CsPbBr3 particles are embedded in commercialized glass composites by a facile dry process. By optimizing the method through sintering in glass frit (GF) composites including CsBr and PbBr2, used as precursors, the encapsulation of CsPbBr3 particles made them waterproof with green fluorescence. To improve the fluorescent properties by reducing aggregation of CsPbBr3, fumed silica (FS) is additionally used to help particles avoid bulking up in the glass matrix. The CsPbBr3 perovskite/glass composites are characterized using scanning electron microscopy (SEM) images and energy-dispersive X-ray spectroscopy (EDS) maps, which support the existence of CsPbBr3 particles in the glass matrix. The photoluminescence (PL) properties demonstrate that the emission spectrum peak, full width at half maximum (FWHM), and photoluminescence quantum yield (PLQY) values are 519 nm, 17 nm, and 17.7 %. We also confirm the water-resistant properties. To enhance water/moisture stability, the composite sample is put directly into water, with its PLQY monitored periodically under UV light.
In this study, a pyrene-core single molecule with amino (-NH2) functional group material was hybridized using ZnO quantum dots (QDs). The suppressed performance of the 1-aminopyrene (1-PyNH2) single molecule as an emissive layer (EML) in light-emitting diodes (LEDs) was exploited by adopting the ZnO@1-PyNH2 core-shell structure. Unlike pristine 1-PyNH2 molecules, the ZnO@1-PyNH2 hybrid QDs formed energy proximity levels that enabled charge transfer. This result can be interpreted as an improvement in surface roughness. The uniform and homogeneous EML alleviates dark-spot degradation. Moreover, LEDs with the ITO/PEDOT:PSS/TFB/EML/TPBi/LiF/Al configuration were fabricated to evaluate the performance of two emissive materials, where pristine-1-PyNH2 molecules and ZnO@1-PyNH2 QDs were used as the EML materials to verify the improvement in electrical characteristics. The ZnO@1-PyNH2 LEDs exhibited blue luminescence at 443 nm (FWHM = 49 nm), with a turn-on voltage of 4 V, maximum luminance of 1500 cd/m2, maximum luminous efficiency of 0.66 cd/A, and power efficiency of 0.41 lm/W.
본 실험에서는 HWE 방법으로 성장시킨 SnSe 단결정 박막에 대한 특성을 조사하였다. 성장된 박막의 결정 구조와 격자 상수를 알아보기 위하여 X-ray diffraction(XRD)에 의한 회절 패턴을 측정하고, 단결정 박막의 결정성을 확인하기 위하여 double crystal X-ray diffraction(DCXRD)에 의한 회절 패턴을 측정하여, 원료부와 열벽부 그리고 기판의 온도 변화에 따른 반치폭을 알아보았다. Rutherford back scattering(RBS)을 측정하여 Sn과 Se의 조성비를 확인하고, 실험값과 이론값의 차이를 조사하였다. 박막의 표면 상태는 atomic force microscopy(AFM) 사진과 주사 전자 현미경(SEM) 사진으로 관찰하여 결정구조와 성장 온도와의 연관성을 조사하였다. 광학 상수는 Spectroscopic Ellipsometry(SE) 방법을 이용하여 단결정 박막의 굴절률(n), 유전상수(${\varepsilon}$), 반사율(R) 그리고 흡수 계수(${\alpha}$) 등 광학 상수를 측정했다.
IV-VI족 화합물인 PbSnSe는 흥미 있는 물리적 특성을 가지고 있는 화합물 반도체로써 본 실험에서는 HWE 방법으로 성장시킨 PbSnSe 박막에 대한 특성을 조사하였다. 원료부와 열벽부 그리고 기판의 온도를 변화시키며 단결정 박막을 성장시켰다. Rutherford back scattering (RBS)을 측정하여 Pb:Sn:Se의 조성비를 확인하였다. 특히 좁은 에너지 대역을 측정하기에 매우 용이한 Fourier transform infra red (FT-IR)측정 장치를 이용하여 에너지 갭을 측정하였다. 박막의 표면 상태는 atomic force microscopy (AFM) 사진과 주사 전자 현미경 (SEM) 사진으로 관찰하여 결정구조와 성장 용도와의 연관성을 조사하였다. 광학 상수는 Spectroscopic ellipsometry (SE) 방법을 이용하여 박막의 광학 상수를 측정했다. PbSnSe 화합물 에피층 시료의 굴절률(n), 유전상수(${\varepsilon}$), 반사율(R) 그리고 흡수 계수(${\alpha}$)등 광학상수를 측정하였다.
본 연구는, PbO-base 유리계의 정보와의 비교 등을 통해 Bi-base 조성 PDP rib으로의 새로운 유리조성 설계를 위한 기초연구의 일환이다. PbO와 유사한 밀도값 및 작업 용이성을 갖고 있는 Bi를 도입한 $Bi_2O_3-B_2O_3-ZnO$ 조성계에 대해, 연화점, 열팽창계수, 에칭성, 유전율 등의 특성측정 및 XPS로 조성에 따른 구조변화 등을 조사하였다. $Bi_2O_3$를 50∼80 wt%까지 폭넓게 첨가된 $Bi_2O_3-B_2O_3-ZnO$계 유리들은 조성에 따라 연화점이 400∼480$^{\circ}C$, 열팽창계수가 $68{\sim}72{\times}10^{-7}/^{\circ}C$, 유전상수는 13∼25으로서 동조성의 Pb-base 조성계와 유사한 물성치를 나타내었다. 특히, Bi의 함유량이 70∼65 wt%의 조성의 경우, 성분 및 물성의 미세조정 등을 통해 rib 재료의 출발조성으로서 적용가능성이 확인되었다. $Bi_2O_3$의 양이 감소함에 따라 $O_{1s}$ peak에서의 결합에너지의 증가와 반가폭(FWHM)이 감소하였는데, 이는 비가교산소의 증가에 기인하였다.
펄스 레이저 증착법을 이용하여 ZnO 박막을 quartz 기판 위에 증착하였으며, 기판 온도에 따른 박막의 구조적 및 광학적 특성을 조사하였다. 기판 온도 변화에 관계없이 모든 박막이 (002) 방향으로 성장하였으며, 400 $^{\circ}C$ 에서 반가폭은 0.24$^{\circ}$로 가장 우수한 결정성을 갖는 박막이 제작되었다. 또, 박막의 발광 특성을 조사한 결과, 모든 박막에서 UV 발광 피크와 deep-level 발광 피크가 관찰되었으며, 기판 온도에 따른 발광 피크의 변화가 관찰되었다. 가장 우수한 UV 발광 특성은 400 $^{\circ}C$ 에서 관찰되었으며, 반가폭은 14 nm 였다. 기판 온도에 무관하게 가시광 영역에서 약 85 % 정도의 투과도를 나타내었다. 투과도 측정을 통하여 얻은 광학 밴드갭 에너지와 UV 발광 중심 값을 비교한 결과, 두가지 결과 값들이 서로 유사한 값을 나타냈다. 이로부터 UV 발광 중심 값이 ZnO 의 near band edge emission 을 나타낸다는 사실을 알 수 있었다.
방사광 광전자분광법을 이용하여 $Co_{x}Pd_{100-x}$ 합금박막들(x = 0, 25, 40, 65)의 가전자띠 스펙트럼들을 측정하고, Co 3d 전자와 Pd 4d 전자들에 의한 각각의 부분스펙트럼 무게분포(partial spectral weight distribution : PSW)를 결정하였다. Co-Pd 합금박막에서의 Co 3d PSW는 수직자기이방성을 나타내는 영역에 해당하는 Co 함량 25% 이하에서 순수 Co 박막의 스펙트럼과 상당히 다른 구조를 보인 반면, Co 함량이 약 40% 이상이 되면 순수 Co 박막의 PES스펙트럼과 거의 일치하였다. Co 함량이 25% 이하의 Co 3d PSW에서 관찰된 페르미준위 근처의 봉우리 구조와 결합에너지 2 eV 근처의 어깨구조는 혼성에 의한 Co 3d 전자구조의 변화를 반영한다. 따라서 Co 3d 전자와 Pd 4d 전자 간의 혼성상호작용이 수직자기이방성의 결정에 중요한 역할을 하는 것으로 추측되었다. Co-Pd 합금박막에서의 Pd 4d PSW는 순수 Pd 스펙트럼에 비하여 그 폭이 넓고, 주 봉우리의 결합에너지가 크며, 페르미준위에서의 스펙트럼의 세기가 작게 관찰되었다. 그리고 Pd 함량이 감소함에 따라 Pd 4d PSW의 반치폭이 증가하였는데, 이러한 결과는 Co-Pd 합금이 형성될 때의 무질서 효과 또는 Co 3d 전자와 Pd 4d 전자간의 혼성상 호작용으로 인한 Pd 4d 전자구조의 변화를 반영하는 것으로 추측되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.