• Journal of information and communication convergence engineering
• /
• 제10권4호
• /
• pp.329-336
• /
• 2012

For designing broadcast protocols in mobile ad hoc networks (MANETs), one of the important goals is to reduce the rebroadcast packets redundancy while reaching all the nodes in network. In this paper, we propose a probabilistic broadcasting mechanism based on selfishness and additional coverage in MANETs. Our approach dynamically adjusts the rebroadcast probability according to the extra covered area and number of neighbor nodes. By these two factors, mobile hosts can be classified into three groups: normal, low selfishness, and high selfishness groups. The nodes in the normal group forward packets for other nodes with high probability, whereas the nodes in the low selfishness group rebroadcast packets with low probability and the nodes in the high selfishness group do not rebroadcast packets. We compared our approach with simple flooding and the fixed probabilistic approach. The simulation results show that the proposed schemes can significantly reduce the number of retransmissions by up to 40% compared simple flooding and fixed probabilistic scheme without significant reduction in the network reachability and end-to-end packet delay.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.581-595
• /
• 2003

Since the conventional direct approaches are hard to be applied for damage diagnosis of complex large-scale structures, a two-step approach for diagnosing the joint damage of framed structures is presented in this paper by using artificial neural networks. The first step is to judge the damaged areas of a structure, which is divided into several sub-areas, using probabilistic neural networks with natural Frequencies Shift Ratio inputs. The next step is to diagnose the exact damage locations and extents by using the Radial Basis Function (RBF) neural network with the second Element End Strain Mode of the damaged sub-area input. The results of numerical simulation show that the proposed approach could diagnose the joint damage of framed structures induced by earthquake action effectively and has reliable anti-jamming abilities.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.13-22
• /
• 2020

Reinforcement steel fixing is a skilled and manually intensive construction trade. Current practice for the quality assessment of reinforcement steel fixing is normally performed by fabricators and has high potential in having errors due to the tedious nature of the work. In order to overcome the current inspection limitation, this study presents an approach that provides visual assistance and inspection enhancement for inspectors to assess the dimensional layout of reinforcement steel fixing. To this end, this study aims to establish an end-to-end framework for rebar layout quality inspection using laser scanning and Augmented Reality (AR). The proposed framework is composed of three parts: (1) the laser-scanned rebar data processing; (2) the rebar inspection procedure integrating with AR; and (3) the checking and fixing the rebar layout through AR visualization. In order to investigate the feasibility of the proposed framework, a case study assessing the rebar layout of a lab-scaled formwork containing two rebar layers is conducted. The results of the case studies demonstrate that the proposed approach using laser scanning and AR has the potential to produce an intuitive and accurate quality assessment for the rebar layout.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.456-463
• /
• 2005

This paper describes a design process of end-milling cutters: solid model of the designed cutter is constructed along with computation of cutter geometry, and the wheel geometry as well as wheel positioning data fur fabricating end-mills with required cutter geometry is calculated. In the process, the main idea is to use the cutting simulation method by which the machined shape of an end-milling cutter is obtained via Boolean operation between a given grinding wheel and a cylindrical workpiece (raw stock). Major design parameters of a cutter such as rake angle, inner radius can be verified by interrogating the section profile of its solid model. We studied relations between various dimensional parameters and proposed an iterative approach to obtain the required geometry of a grinding wheel and the CL data fer machining an end-milling cutter satisfying the design parameters. This research has been implemented on a commercial CAD system by use of the API function programming, and is currently used by a tool maker in Korea. It can eliminate producing a physical prototype during the design stage, and it can be used fur virtual cutting test and analysis as well.

• Journal of Chest Surgery
• /
• 제27권7호
• /
• pp.603-609
• /
• 1994

Esophageal atresia is a rare congenital anomaly and it usually associated with tracheo-esophgeal fistula and other congenital anomalies. The first report of esophageal atresia with tracheo-esophageal fistula was done by Thomas Gibson in 1696. In 1941, Haight performed the first successful primary anastomosis for esophageal atresia. These accomplishments opened the gateway for clinical studies that have resulted in reinforcements and improvement in the care of infants born with this anomaly. From January 1986 to April 1994, 14 cases of esophgeal atresia with tracheo-esophgeal fistula were diagnosed in Kyung Hee Uinv. Hospital. There were 9 male and 5 female infants. 12 infants were Gross classification type C and 2 infants were type A. The average body weight was 2.7$\pm$0.4kg and Waterson Category A contained 4 infants, B contained 3 infants and C contained 7 infants. Among these infants, 9 infants were underwent anastomosis procedures. We performed retropleural approach in 6 infants, transpleural approach in 2 infants and 1 infant was performed colon interposition through substernal space.By the method of anastomosis, end-to-side anastomosis was performed in 5 infants, end-to-end anastomosis in 3 infants and esophagocologastrostomy in 1 infant.The former 8 infants were Gross classification type C and the latter was type A. Among the type C infants, 6 infants were anastomosed with one layer interrupted suture and 2 infants with 2 layer interrupted suture. Post- operative death was in 1 infant and 8 infants were discharged with good result and have been in good condition.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.440-451
• /
• 1985

본 논문에서는 곡면절삭력계의 해석을 통하여 절삭성과 내마멸성이 우수한 공 구기하형상과 곡면절삭과정에서 절삭조건에 따라 변화하는 가공정밀도 및 안정성을 규 명하고자 한다.

• 보건행정학회지
• /
• 제4권2호
• /
• pp.111-125
• /
• 1994

In developing total hospital information system, large amount of time and expense are to be spent while its results are likely to lead itself to end-users' dissatisfaction. Some of the main complaints on the part of end-users come from insufficient consideration of end-users environment as well as inappropriate representation of their requirement in the system alalysis and design. This papre addresses some advantages of Essential Logical Modeling Process for better analysis and design, explaining by example the developmental process of the Patent Management and Accounting System for a tertiary care hospital. In the case, the Essential Model, suggested by McMenamin and Palmer, proved to be an effective tool for clear separation of analysis and design phase and for better communication among system developers and with end-users. The modeling process itself contributed to better program modularity as well, shown in a Structured Chart. Difficulties in learning how to identify' essential activities' for the modeling practice were experienced in the beginnins stage, which were, however, overcome by elaborating some heuristic guideling and by rdferring to necessary tools including State Transition Diagram, Control Flow Diagram, and so many. While full evaluation of the Essential Model usag remains to wait till the completion of the case project, its strengt in making clear distinction between analysis and design phase was enough to be attractive to system analysts. The model concepts are open to many further application fields, particularly such areas as business re engineering, process remodeling, office automation, and organizational restructuring.

• Journal of Communications and Networks
• /
• 제4권2호
• /
• pp.108-117
• /
• 2002

TCP, which was developed on the basis of wired links, supposes that packet losses are caused by network congestion. In a wireless network, however, packet losses due to data corruption occur frequently. Since TCP does not distinguish loss types, it applies its congestion control mechanism to non-congestion losses as well as congestion losses. As a result, the throughput of TCP is degraded. To solve this problem of TCP over wireless links, previous researches, such as split-connection and end-to-end schemes, tried to distinguish the loss types and applied the congestion control to only congestion losses; yet they do nothing for non-congestion losses. We propose a novel transport protocol for wireless networks. The protocol called VS-TCP (Variable Segment size Transmission Control Protocol) has a reaction mechanism for a non-congestion loss. VS-TCP varies a segment size according to a non-congestion loss rate, and therefore enhances the performance. If packet losses due to data corruption occur frequently, VS-TCP decreases a segment size in order to reduce both the retransmission overhead and packet corruption probability. If packets are rarely lost, it increases the size so as to lower the header overhead. Via simulations, we compared VS-TCP and other schemes. Our results show that the segment-size variation mechanism of VS-TCP achieves a substantial performance enhancement.

• ETRI Journal
• /
• 제21권4호
• /
• pp.52-64
• /
• 1999

QoS monitoring is a kind of real-time systems which allows each level of the system to track the ongoing QoS levels achieved by the lower network layers. For these systems, real-time communications between corresponding transport protocol objects is essential for their correct behavior. When two or more entities are employed to perform a certain task as in the case of communication protocols, the capability to do so is called interoperability and considered as the essential aspect of correctness of communication systems. This paper describes a formal approach on modeling and interoperability test case generation of a real-time QoS monitoring protocol. For this, we specify the behavior of flow monitoring of transport layer QoS protocol, i.e., METS protocol, which is proposed to address QoS from an end-to-end's point of view, based on QoS architecture model which includes ATM net work in lower layers. We use a real-time Input/Output finite State Machine to model the behavior of real-time flow monitoring over time. From the modeled real-time I/OFSM, we generate interoperability test cases to check the correctness of METS protocol's flow monitoring behaviors for two end systems. A new approach to efficient interoperability testing is described and the method of interoperability test cases generation is shown with the example of METS protocol's flow monitoring. The current TTCN is not appropriate for testing real-time and multimedia systems. Because test events in TTCN are for message-based system and not for stream-based systems, the real-time in TTCN can only be approximated. This paper also proposes the notation of real-time Abstract Test Suite by means of real-time extension of TTCN. This approach gives the advantages that only a few syntactical changes are necessary, and TTCN and real-time TTCN are compatible. This formal approach on interoperability testing can be applied to the real-time protocols related to IMT-2000, B-ISDN and real-time systems.

• 한국통신학회논문지
• /
• 제15권7호
• /
• pp.574-580
• /
• 1990

전통적 정보시스템과 그 개발방법이 application backlog의 증가 등 User의 다양한 개발요구에 적절히 부응할 수 없기 때문에 이에 대한 대안으로서 End-User Computin(EUC) 이 대두되었다. 따라서 EUC의 기대이익과 위험요소를 분석하고, 이를 시행하기 위한 적합한 모델이 필요하다. 이 연구는 정보시스템 연구모델을 바탕으로 EUC를 실행할 때 필요한 전략을 제시함으로써 기업의 MIS 정책방향 설정에 기여하고자 한다.