• Title/Summary/Keyword: end-spring

Search Result 329, Processing Time 0.026 seconds

Effect of Thermal Compression Treatment on the Surface Hardness, Vertical Density Propile and Thickness Swelling of Eucalyptus Wood Boards by Hot-pressing

  • Unsal, Oner;Candan, Zeki;Buyuksari, Umit;Korkut, Suleyman;Chang, Yoon-Seong;Yeo, Hwan-Myeong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.39 no.2
    • /
    • pp.148-155
    • /
    • 2011
  • Thermal treatment techniques are used for modifying wood and wood-based materials to improve dimensional stability and hygroscopicity. This study investigated the effects of press pressure and temperature on density, vertical density profile, thickness swelling and surface hardness of eucalyptus wood boards. The experimental wood boards were prepared from Turkish River Gum ($Eucalyptus$ $camaldulensis$ Dehn.). The surface hardness value increased with increasing press pressure in the treated groups. The application of a higher pressure at the same temperature level increased the amount of swelling of wood. It means that it is not needed for application of higher pressure to enhance the dimensional stability of wood. It is expected that it is possible to produce increased hardness, dimensional stability and durability by application of hot pressing treatment. This research showed that different press pressure and temperature values should be used to improve the performance properties of eucalyptus wood so that the end-use of the wood materials could be expanded.

Development of 3 D.O.F parallel robot's simulator for education

  • Yoo, Jae-Myung;Kim, John-Hyeong;Park, Dong-Jin
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.2290-2295
    • /
    • 2005
  • In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

  • PDF

Numerical Simulation on Hydrodynamic Characterization Changes Associated with the Construction of Dikes and Dredging Operations in Saemangeum Lake (새만금호 내 방수제 공사 및 준설에 의한 수리동역학적 특성 변화 수치 모델링)

  • Oh, Chan-Sung;Choi, Jung-Hoon;Cho, Young-Kweon
    • Journal of Environmental Science International
    • /
    • v.22 no.9
    • /
    • pp.1115-1129
    • /
    • 2013
  • The study area is located on the western coast, and the inner development construction has been ongoing since 2011. The purposes of current study are to effectively simulate and quantitatively predict a temporal and spatial distributions of water temperature and salinity due to the stages of inner development construction in saemangeum reclaimed area. The transient-state numerical modeling using EFDC model is done, and the numerical simulation results are validated reasonably by repetitive numerical model calibration procedures with respect to field measurements of water temperature and salinity. The spatial distributions of water temperature and salinity show similar trends before and after construction of the dikes. In spring season, the salinity has maximum value of 21 psu, while, in summer season, the salinity shows 7 psu in a whole modeling domain. Thus, it is clearly observed that salt water is replaced by freshwater. However, the salinity and temperature reach their initial conditions at the end of the year. The salinity after construction of the dikes is lower than that before construction of them at Mankyeong area. On the other hands, after construction of the dikes, the salinity after dredging operations is higher than that before dredging. Because drastical increasing of water volume in Saemangeum Lake leads to increasing of stagnation time at bottom layer, and salt water is easily intruded to the two estuaries. Therefore, it may be concluded that hydrodynamic characteristics on Saemangeum are dominated by either Mankyeong and Dongjin discharge or sluice gates in/out-flow amounts, and thus they must be properly considered when rigorous and reasonable predictions of water temperature and salinity according to the stages of inner development construction.

An Extraction of House Planning Elements by Small-Group Workshop Panel with Owners and Tenants of Multi-family House (다세대.다가구주택 소유자 및 임차인과의 소집단 워크샵 패널을 통한 주택계획요소의 추출)

  • Lee, Young-Sun;Kim, Ju-Suck;Lee, Yeun-Sook
    • Proceeding of Spring/Autumn Annual Conference of KHA
    • /
    • 2009.04a
    • /
    • pp.78-83
    • /
    • 2009
  • Since modern times, lack of housing had become more serious in the cities when going through urbanization process. As a countermeasure against the situation, multi-family houses raised its head at the end of 1980s. Regarding multi-family houses, which is mainly targeting low-income group, however, only quantitative supply has been focused with no enough research about space planning. For now that the supply of housing in the cities reached certain level, there is a need of planning multi-family house considering the demands of residents. Therefore, the purpose of this research is to identify and analyze the demands of owners and tenants of multi-family house in an improvement district of housing environment for housing improvement, and to extract house planning components. As a research methodology, small-group workshop panel using drawings and mock-up has been practiced to reach residents' concertized opinion. After dividing the residents group into 2 groups which include owners group(3 participants) and tenants group(3 participants), 3 times of workshops covering 2 days are conducted for each group. Actual-condition investigation of the participants' houses was ran side by side with workshop. As a result, difference in their point of view about the reasons and the direction of housing improvement was identified, on the other hand that there is similarity in their demands such as guaranteeing independency and privacy among households.

  • PDF

Variation of sulfur dioxide concentrations at Kangnung under the Influence of Regional Meteorology for the Period of Yellow Sandy Dusts in Spring (봄철 황사기간중 지역기상 영향에 의한 강릉지역에서의 아황산가스 농도 변화)

  • Choi, Hyo
    • Journal of Environmental Science International
    • /
    • v.5 no.2
    • /
    • pp.131-140
    • /
    • 1996
  • Analysis of hourly variations of sulfur dioxide ($SO_2$) concentrations affected by regional climates for the period of yellow sandy dusts was carried out from March 31 through April 9, 1993. The concentration of 50, at a coastal city, Kangnung city, was much higher than that at an inland city Wonju in the west, but the hourly distrbutions of $SO_2$ concentrations show a similar tendency at both cities. Under the prevailing synoptic-scale westerly winds blowing over a high Mt. Taegualyang in the west toward Kangnung city in the eastern coastal region, the $SO_2$ at Kangnung is trapped by an easterly sea-breeze during the day and under prevailing easterly winds, it is also isolated by the high wall of Mt. Taegualyang, with its high concentration from 14 to 16 LST. Furthermore, when the westerly winds were dominent all day long the high $SO_2$ concentrations at Kangnung were produced by its intrusion from a urban city, Wonju or China in the west into a mountainous coastal city, Kangnung, to some extent, and when the air becomes rapidly cooled down at the clear daytime or the nighttime, their concentrations are also increased by a great amount of heating fuel combustion. Especilly, its maximum concentrations were shown in Wonju and Kangnung from 08 LST through 10 LST, due to the increase of auto vehicles near the beginning time of office hour and were detected again after sunset due to both increases of vehicles at the end of office hour and heating fuel combustion. During the period of Yellow Sandy Dusts which are transported from China into Korea, the $SO_2$ concentrations on rainy days at Wonju and Kangnung were much lower than the monthly mean values of $SO_2$, and their low concentrations could be caused by the scavenging process of rain.

  • PDF

Interaction Between time of Nodal Explant Collection and Growth Regulators Determines the Efficiency of Morus alba Micropropagation

  • Hassanein A.M.;Galal A.A.;Azooz M.M.
    • Journal of Plant Biotechnology
    • /
    • v.5 no.4
    • /
    • pp.225-231
    • /
    • 2003
  • The hormonal requirement suiting micropropagation of Morus alba during any season throughout the year was studied. Sprouting frequency from axillary buds of M. alba was greatly influenced by the time of explant collection, the highest value was achieved when nodal explants were collected at the end of bud dormancy period (late in March) and cultured on Murashige and Skoog (MS) medium supplemented with low concentration (0.5 mg/L) of BAP, kinetin or IBA (85-68%). In addition, they showed higher axillary bud sprouting on growth-regulators-free medium (49%) than others collected in autumn or winter and cultured on medium supplemented with various growth regulators (47-48%). Regardless of that period, young explants with greenish buds collected in summer exhibiting high sprouting frequency (66%) on MS medium supplemented with 0.5 mg/L kinetin and 0.5 mg/L GA3. Shoot multiplication via adventitious bud formation was achieved when the nodal explants were cultured on MS medium supplemented with 2 mg/L BAP and 0.2 mg/L IBA. Further multiplication via nodal explants of in vitro grown shoots was obtained on MS medium supplemented with 0.5 mglL BAP and 0.5 mg/L GA3. While half strength MS medium supplemented with low concentration (0.5 mg/L) of IBA, IAA or 2,4-D stimulated adventitious root formation, IBA was the best. After transfer the plantlets to the soil, acclimatization for three weeks was essential prerequisite for survival in high frequency (92%). Peroxidase activity is related to break of bud dormancy where maximum enzyme activity was detected when the lateral buds were induced to commence growth under field condition (early in spring) or in vitro.

Studies on the cocoon Boiling by the Infra red-ray Heater (적외선자견에 관한 연구)

  • 남중희
    • Journal of Sericultural and Entomological Science
    • /
    • v.10
    • /
    • pp.81-88
    • /
    • 1969
  • This study was carried out to investigate the effects of the cocoon cooking by infra red ray heater established in to the cocoon boiling machine. The results were summarized as follows. 1. According to the cocoons, the non bave end breaking percentage of cocoons was increased to 5∼9% in spring and 2∼10% in autumn. 2. There was no significant in the raw silk percentage. 3. The irradiation effect by the number of infra-red ray heater was different, namely, the raw silk percentage of the excellent cocoons was increased in case of 1 Kwatt irradiation, and that of the inferior cocoons was increased in the 2 Kwatt irradiation. 4. Reeling efficiency was showed to 14% maximum and 3% minimum(index).

  • PDF

The Legal Sociological Study on the Reality of Civil Mediation and it's Activating Policy - in Jurisdiction of Gwangju & Chonnam District Court - (민사조정의 운영실태와 그 활성화방안에 관한 법사회학적 연구 - 광주 및 전남지역의 법원을 중심으로 -)

  • Oh, Dae-Sung
    • Journal of Arbitration Studies
    • /
    • v.17 no.2
    • /
    • pp.189-219
    • /
    • 2007
  • Mediation is type of intervention in which the disputing parties accept the offer of the judge or a third party to recommend a solution for their controversy. Mediation differs from arbitration in being a voluntary resolution rather than a judicial procedure. Thus, the parties to the dispute are not bound to accept the mediator's recommendation. Resort to mediation has become increasingly frequent for civil disputes. Mediation has been successful in many cases of civil conflict. Mediation has become increasingly important for monetary disputes as well, particularly in damage cases. While most people consider mediation a far superior experience to court, everything I tell you a mediator should not do is something that at least one mediator I have dealt with has done to a client. In theory, a mediator should never share anything you tell him or her without your permission. In theory a mediator should not "spring" evaluations on anyone in a mediation without your permission (e.g. a mediator should never say "your case is worth \OOOO and I just told the other side that). In theory a mediator should not browbeat or threaten you. At the end, usually about 55% of the time with a good mediator in Kwangju Appellate Court in 2003, the parties reach an agreement that is in their best interests. If they decide to sign off on a signed agreement, the signed agreement is binding. I obviously feel mediation is a very good thing and the numbers and surveys bear me out. This article is written about how mediation is proceeded, what is the realities, what is the problem and what is the activating way. For this study, I research with legal sociological approach using Korean Judicial Year Boot judicial document and my experience as meditator in Kwangju District Court.

  • PDF

Columnar Aerosol Properties at Yongin According to Transport Paths of Back Trajectories (역궤적 이동경로별 용인지역의 컬럼에어로졸 특성)

  • Park, Jisoo;Choi, Yongjoo;Ghim, Young Sung
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.33 no.2
    • /
    • pp.97-107
    • /
    • 2017
  • Columnar aerosol properties retrieved from solar radiation were investigated at the Yongin (YGN) SKYNET site over seven years from October 2008 to October 2015. Hourly averages were calculated when the data were available, and back trajectories were calculated to examine the effects of regional transport. Data recovery rate was low at 6.6%, primarily because solar radiation was measured only under daytime clear-sky conditions. Mean values of the fine-mode volume fraction (FMVF) as well as its seasonal variation were similar to those of $PM_{2.5}/PM_{10}$ although the coarse-mode fraction of column aerosols tended to be slightly larger. The values of single scattering albedo (SSA) and FMVF were lower in spring due to the effects of mineral dust, and higher in summer due to secondarily-formed inorganic ions. Back trajectories were grouped into five clusters according to the directions of transport paths. Aerosol loading was highest for Cluster 2 from the northwest, but SSA and FMVF were not particularly high or low because aerosols were composed of various materials with different properties. Aerosol loading was lowest for Cluster 5 from the Pacific Ocean passing through the south end of Japan, whose SSA and FMVF were highest as secondarily-formed inorganic ions were mixed.

Effects of Allium Vegetables on Energy Stores and Utilization in Exercising Rats

  • Kong, Eun-Young;Cho, Youn-Ok
    • Preventive Nutrition and Food Science
    • /
    • v.9 no.1
    • /
    • pp.39-44
    • /
    • 2004
  • This study investigated the effect of allium vegetable intake on the storage and utilization of energy substrates before, during, and after exercise in tissues of rats. Ninety rats were fed either a control diet or a diet with added Allium sativum (AS, garlic), Allium cepa (AC, onion), Allium fistulosum (AF, spring onion), or Allium tuberosum (AT, Chinese chives) for 4 weeks and were then subdivided into 3 groups: before-exercise (BE); during-exercise (DE); after-exercise (AE). The DE group was exercised on treadmill for 1 hour just before being sacrificed at the end of 4th week of the dietary treatment rats in the AE group were allowed to recuperate for 2 hours after being exercised like the DE group. The levels of glycogen (GLY), triglyceride (TG) and protein (PRO) were compared in liver and skeletal muscle. In the AS diet animals, the level of liver GLY was significantly higher than those of control animals in the BE, DE and AE groups. The level of muscle TG also tended to be higher in BE, but lower in AE than in control animals. In AC animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. The level of muscle TG also tended to be higher than those of control animals in BE and DE but tended to be lower in AE. In AF animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. The level of muscle TG was also significantly lower than those of control animals in BE, DE and AE groups. In AT animals, the level of muscle GLY was significantly lower than those of control animals in BE, DE and AE. These results suggest that Allium sativum diets enhance the capacity to store fuel before as well as during exercise and increases the potential to utilize the stored fuel during exercise.