• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1681-1688
• /
• 2000

A dynamic model for the prediction of surface topography in high speed end milling process is developed. In this model the effect of tool runout, tool deflection and spindle vibration were taken in to account. An equivalent diameter of end mill is obtained by finite element method and tool deflection experiment. A modal parameter of machine tool is extracted by using frequency response function. The tool deflection, spindle vibration chip thickness and cutting force were calculated in dynamic cutting condition. The tooth pass is calculated at the current angular position for each point of contact between the tool and the workpiece. The new dynamic model for surface predition are compared with several investigated model. It is shown that new dynamic model is more effective to predict surface topography than other suggested models. In high speed end milling, the tool vibration has more effect on surface topography than the tool deflection.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.40-45
• /
• 2007

본 연구에서는 광전자 소자에 폭넓게 사용되는 ZnCdSe 화합물 반도체의 end-point인 CdSe의 유전함수 spectrum을 Vacuum Ultra Violet spectroscopic ellipsometry(타원편광분석법) 측정하여 분석하였다. 측정 결과는 변수화 모델을 이용하여 분석하였으며 그 결과 6 eV 이상에 존재하는 전자전이점들을 확인할 수 있었고 CdSe의 Critical Point(CP) 구조를 수치화 함으로써 온도나 화합물 함량에 따른 광특성 의존성 연구 등에 활용될 수 있는 database를 확보하였다.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.712-721
• /
• 2023

While hydrogen is widely used, it has a low minimum ignition energy, raising safety concerns when using it. This research studied which parameters are the key variables in the hydrogen release and diffusion. These parameters were divided into six process variables in the initial release and two environmental variables in the dispersion. One hundred and twenty cases were selected through design of experiment, and the end-point in each case were analyzed using PHAST. Afterwards, an end-point prediction model was developed using RSM and ANOVA, and the impact of each variable on the endpoint was analyzed. As a result, the influence of eight variables was graded. The nozzle diameter had the greatest influence on the end-point, while the pipe roughness coefficient had no effect on the end-point. It is expected that these results will be used as basic data to improve safety across all fields of hydrogen handling facilities.

• 대한의용생체공학회:의공학회지
• /
• 제44권5호
• /
• pp.346-353
• /
• 2023

In this paper, we propose an innovative approach that leverages deep learning to find optimal reference points for achieving precise tooth segmentation in three-dimensional tooth point cloud data. A dataset consisting of 350 aligned maxillary and mandibular cloud data was used as input, and both end coordinates of individual teeth were used as correct answers. A two-dimensional image was created by projecting the rendered point cloud data along the Z-axis, where an image of individual teeth was created using an object detection algorithm. The proposed algorithm is designed by adding various modules to the Unet model that allow effective learning of a narrow range, and detects both end points of the tooth using the generated tooth image. In the evaluation using DSC, Euclid distance, and MAE as indicators, we achieved superior performance compared to other Unet-based models. In future research, we will develop an algorithm to find the reference point of the point cloud by back-projecting the reference point detected in the image in three dimensions, and based on this, we will develop an algorithm to divide the teeth individually in the point cloud through image processing techniques.

• 한국식품과학회지
• /
• 제23권2호
• /
• pp.157-160
• /
• 1991

냉동된 닭 가슴살 patty를 계육 가공공장으로부터 얻어서 내부온도가 $0{\pm}1.1^{\circ}C$가 되도록 조절하였다. Potentiometer에 연결된 thermocouple을 patty 중심에 삽입한 뒤 $168.3,\;179.4,\;190.6^{\circ}C$에서 튀겨 내부온도의 범위가 $48.9^{\circ}C$에서 $71.7^{\circ}C$가 되도록 하였다. 일반적으로 patty 내부온도는 튀김 솥(frier)에서 제거한 뒤 튀기는 온도나 내부온도와 관계없이 약 $11.1^{\circ}C$ 증가하였으며, 각각 다른 튀김온도에서 원하는 내부온도와 최종 내부온도는 튀기는 시간을 조절하므로써 얻을 수 있었다. 세 종류의 튀기는 온도에서 튀기는 시간이 독립변수인 3차 회귀다항식으로 시료 내부온도와 최종 내부온도를 예측하였고 최종 내부온도가 독립 변수인 2차 회귀다항식으로 수율을 예측하였다.

• Journal of Astronomy and Space Sciences
• /
• 제24권1호
• /
• pp.69-78
• /
• 2007

Earth-Sun-Heliosphere Interactions Experiments(EARTHSHINE) 미션의 주 탑재체인 Albedo Monitor and Radiometer(Amon-Ra) 광학계는 최초로 제1 라그랑제 지점(Lagrange point 1) 주위의 혜일로(Halo) 궤도에 위치하여 태양 복사 활동 및 지구 반사율 변화를 1% 정확도 이내로 측정함으로서 현존하는 지구 반사율 추이의 모순을 해결할 수 있는 과학적 측정 자료를 제시하는데 그 목적을 가지고 있다. 이에 이미 개발된 광학 성능 검증용 Amon-Ra 광학계의 가시광채널 시험 모델 및 광선 추적 기법을 이용한 통합적 광선 추적 end-to-end 과학 임무 성능 평가 수치 모사 기법을 확립하였으며, 개발된 기법을 이용하여 실제 제작된 Amon-Ra 광학계를 제1라그랑제 지점에 위치시키고 태양과 지구 밝기를 다양하게 변화시킨 후 광학계에 입사되는 에너지 복사량을 수치 모사로 측정하였다. 관측된 지구 및 태양 밝기로부터 지구 반사율 변환을 위하여 각 분포 모델(GLobal Angular Distribution Model, ADM)을 이용하였으며 수치 모사에 의한 지구 반사율 측정 결과를 Amon-Ra 광학계의 측정 오차 범위인 ${\pm}0.28%$와 비교함으로서 개발된 end-to-end 성능 검증 기법의 계산 정밀도를 확인하였다. 이는 기존의 광학계 성능 검증법의 한계를 뛰어넘어 광학계 성능 평가를 실시간으로 검증할 수 있다는 점에서 큰 의의를 지닌다.

• 드라이브 ㆍ 컨트롤
• /
• 제9권3호
• /
• pp.29-36
• /
• 2012

The hydraulic cylinder is used for actuating the roller-link type rotating floodgate which controls the volume of water in the reservoir. The locating points of hydraulic cylinder are restricted to the limited space and determined to minimize the cylinder force necessary for actuating the floodgate. Generally, the head end point of cylinder is fixed at underground and the rod end point of cylinder is connected to the support link. Therefore there exist three design variables to be determined to minimize the cylinder force within the rotating range of floodgate. First, the mathematical model of the roller-link type rotating floodgate is derived to find the cylinder force corresponding to the floodgate angle. Then, the optimal locating point of hydraulic cylinder is searched using the complex method that is one kind of constrained direct search method.

• 대한약침학회지
• /
• 제4권1호
• /
• pp.49-53
• /
• 2001

This experiment has investigated the influence of Yamen (Du. 15) point injection on learning and memory dysfunction caused by cerebral ischemia and reprofusion in bilateral cervical general artery combined with bleeding on mouse tail to mimic vascular dementia in human beings. By dividing 40 mice into 4 groups (group1false operation group, group2model group, group3point injection with Cerebrolysin group4point injection with saline.) According to random dividing principles, we observed the influence of Yamen(Du. 15) point injection on the time of swimming the whole course used by model mice which had received treatment for different days in different groups, and the influence of those mice on wrong times they entered blind end. The result showed that point injection with Cerebrolysin and saline could improve learning and memory dysfunction of the mice caused by cerebral ischemia.

• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.669-690
• /
• 2018

This paper deals with numerical modeling of dynamic failure phenomena in rate-sensitive brittle and/or ductile materials. To this end, a two-dimensional continuum viscodamage-embedded discontinuity model, which is based on our previous work (see Do et al. 2017), is developed. More specifically, the pre-peak nonlinear and rate-sensitive hardening response of the material behavior, representing the fracture-process zone creation, is described by a rate-dependent continuum damage model. Meanwhile, an embedded displacement discontinuity model is used to formulate the post-peak response, involving the macro-crack creation accompanied by exponential softening. The numerical implementation in the context of the finite element method exploiting the second-order mid-point scheme is discussed in detail. In order to show the performance of the model several numerical examples are included.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.352-358
• /
• 2005

This study aims to separate hydrograph into baseflow and event water to calculate baseflow rate during a rainfall in small catchments, Yuseong, Daejeon, The hydrograph of stream during a period with no excess rainfall will decay. The discharge is composed entirely of groundwater contributions. During the period, the Cl concentration of the stream water can be regarded as being in equilibrium with that of the groundwater. Using Cl as a conservative tracer, two-component hydrograph separations were performed from end point of the period to next end point. The required data were obtained by monitoring of the surface water table, along with discharge rate of stream. Cl concentration of rainfall, surface water were measured and recorded. Hydrograph separation, a mixing model using chemical tracer is applied to chemical hydrograph separation technique. These results show that baseflow rates are 31.6% of rainfall in the catchments during study period.