• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.81-88
• /
• 2005

This paper attempts to derive the dynamic model of handling tasks in finger robot which grasps stable and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange's equation. Secondly, the roblems of controlling both the forces of pressing object and the rotation angle of the object under the geometric constraints are discussed. The effect of geometric constraints of area-contacts between the link's end-effector and the object is analyzed and the model based on the differential-algebraic equations is presented. In this paper, the control method for dynamic stable grasping and enhancing dexterity in manipulating things is proposed. It is illustrated by computer simulation and the experiment that the control system gives the performance improvement in the dynamic stable grasping and nimble manipulating of the dual fingers robot with soft tips.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.460-470
• /
• 2011

This paper presents a dynamic workspace control method of underwater manipulator considering a floating ROV (Remotely Operated vehicle) motion caused by sea wave. This method is necessary for the underwater work required linear motion control of a manipulator's end-effector mounted on a floating ROV in undersea. In the proposed method, the motion of ROV is modeled as nonlinear first-order differential equation excluded dynamic elements. For online manipulator control achievement, we develop the position tracking method based on sensor data and EKF (Extended Kalman Filter) and the input velocity compensation method. The dynamic workspace control method is established by applying these methods to differential inverse kinematics solution. For verification of the proposed method, experimental data based test of ROV position tracking and simulation of the proposed control method are performed, which is based on the specification of the KORDI deep-sea ROV Hemire.

• 제어로봇시스템학회논문지
• /
• 제15권2호
• /
• pp.176-183
• /
• 2009

This paper proposes command signal generating method for a wearable robot using the force as the input signal. The basic concept of this system pursues the combination of the natural and sophisticated intelligence of human with the powerful motion capability of the robot. We define a task for the command signal generation to operate with the human body simultaneously, paying attention to comfort and ease of wear. In this study, we suggest a basic exoskeleton experimental system to evaluate a HRI(Human Robot Interface), selecting interfaces of arm braces on both wrists and a weight harness on the torso to connect the robot and human. We develop the HRI to provide a command for the robot motion. It connects between the human and the robot with the multi-axis load-cell, and it measures the relative force between the human and the robot. The control system calculates the trajectory of end-effector using this force signal. In this paper, we verify the performance of proposed system through the motion of elbow E/F(Extension/Flexion), the shoulder E/F and the shoulder Ab/Ad (Abduction/Adduction).

• 한국게임학회 논문지
• /
• 제3권2호
• /
• pp.24-29
• /
• 2003

The market of digital avatar with internet and digital technology is increasing rapidly. The users want to express any free-formed motion of their avatars in the cyber space. The user s motion capturing method as the avatar's motion can express any free-formed motion of the avatar in real-time but the methods are expensive and inconvenient. In this paper, we proposed a new method of expressing any free-formed motion of the avatar in real-time. The proposed method is an algorithm for real-time control of a 3D avatar in symmetry-formed free motion. Specially, the algorithm aims at the motion control of a 3D avatar for online dancing games. The proposed algorithm uses the skeleton character model and controls any one of two hands of the character model by a joystick with two sticks. In the symmetry-formed motion, the position and orientation of one hand can determine the position and orientation of the other hand. And the position and orientation of a hand as an end-effector can determine the pose of the arm by Inverse Kinematics. So the algorithm can control the symmetry-formed free motions of two arms by one joystick with two sticks. In the dance game, the algorithm controls the arm motion by the joystick and the other motion by the motion captured DB.

• 조명전기설비학회논문지
• /
• 제13권1호
• /
• pp.111-118
• /
• 1999

함반영 촉각장치(Force-Reflecting haptic Interface)는 인간이 컴퓨터에 의해 생성한 가상의 세계에 손의 위치 정보를 제공하고 가상의 손이 가상 환경에 접촉했을 때 인간에게 촉각을 전달하는 장치이다. 본 논문에서는 컴플라이언스 제어가 비교적 용이한 초음파 모터 액츄에이터를 사용하여 직접구동 방식으로 촉각장치를 설계하였다. 렌더링 알고리즘을 이용하여 가상의 벽, 가상 버튼, 가상 구멍 등의 기본적인 역감실험을 한 결과 힘 반영에 의한 역감을 제시받을 수 있었다.

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.11-17
• /
• 2015

An intelligent deburring control (IDC) device is used to control the constant force for a deburring tool mounted on the end-effector of a robotic arm. This device maintains a constant contact force between the deburring tool and the workpiece in order to provide a good deburring performance. In this paper, we build a mathematical model in Matlab/Simulink to estimate the force control mechanism of the pneumatic system for the IDC device. The Simulink blocks are built for each separate part and are linked into an integrated simulation system. Such a model also relies on the effects of the flow rate through the valve, air compressibility in the cylinder, and time delay in the pressure valve. The results of the simulation are compared to a simple experiment in which convenient math modeling is performed. These results are then used to optimize the mechanical design and to develop a force control algorithm for the pneumatic cylinder.

• 로봇학회논문지
• /
• 제16권2호
• /
• pp.147-154
• /
• 2021

One of the most challenging issues when robots interact with the environment is to establish contact quickly and avoid high impact force at the same time. The proposed method implements the passive suspension system using the redundancy of the torque-controlled robot. Instead of utilizing the actual mechanical compliance, the distal joints near the end-effector are controlled to act as a virtual spring-damper system with low feedback gains. The proximal joints are precisely controlled to push the mid-link, which is defined as the boundary link between the proximal and distal joints, towards the environment with high feedback gains. Compared to the active compliance methods, the contact force measurements or estimates are not required for contact establishment and the control time delay problems do not occur correspondingly. The proposed method was applied to the landing foot control of the 12-DoF biped robot DYROS-RED in the simulations. In the results, the impact force during landing was significantly reduced at the same collision speed.

• 로봇학회논문지
• /
• 제16권2호
• /
• pp.137-146
• /
• 2021

When controlling manipulator, degree of freedom is lost in singularity so specific joint velocity does not propagate to the end effector. In addition, control problem occurs because jacobian inverse matrix can not be calculated. To avoid singularity, we apply Deep Deterministic Policy Gradient(DDPG), algorithm of reinforcement learning that rewards behavior according to actions then determines high-reward actions in simulation. DDPG uses off-policy that uses 𝝐-greedy policy for selecting action of current time step and greed policy for the next step. In the simulation, learning is given by negative reward when moving near singulairty, and positive reward when moving away from the singularity and moving to target point. The reward equation consists of distance to target point and singularity, manipulability, and arrival flag. Dual arm manipulators hold long rod at the same time and conduct experiments to avoid singularity by simulated path. In the learning process, if object to be avoided is set as a space rather than point, it is expected that avoidance of obstacles will be possible in future research.

• 대한건축학회논문집:구조계
• /
• 제34권4호
• /
• pp.65-74
• /
• 2018

The primary objective of this study is to develop a conceptual design of automated pothole patching machine that improves the conventional work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)selection of element technology for conceptual design, 3)deduction of work process and conceptual design, 4)life cycle cost analysis of the conceptual design. As a result, X-Y table telescopic manipulator, pothole patching end effector, realtime pothole recognizer, 3D pothole volume profiler, automated pothole patching machine controller are selected as core technologies. Furthermore, a conceptual design and working process of an automated pothole patching machine are developed based on the core technologies. According to the life cycle cost analysis result, the cost of the automated method was 38.3% less than that of the conventional method, and the economic efficiency was also superior(ROR 77.1%, Break-even Point 23.8month). It is expected that the application range and impact on the construction industry will be enormous due to the increasing trend of road maintenance market.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.16-23
• /
• 2021

Currently, 6-axis articulated robots are used throughout the industry because of their 6-dof (degrees of freedom) and usability. However, 6-axis articulated robots have a fixed base and their movements are limited by the rotational operating range of each axis. If the angle of the 2-axis additional axes can be adjusted according to the position and orientation of the end-effector of the 6-axis articulated robot, the effectiveness of the 6-axis articulated robot can be further increased in areas where the angle is important, such as welding. Therefore, in this paper, we proposed a cooperative kinematic inter-operation strategy. The strategy will be verified using the Simulink of MATLABⓇ, an engineering program, and RecurdynⓇ, a dynamic simulation program.