• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2267-2272
• /
• 2009

본 논문에서는 다층형 결합 선로를 이용한 6-단자 위상 상관기와 동일한 구조를 갖는 반송파 복원기 그리고 위상 변위기를 갖는 일원화된 6-단자 직접변환 수신 전처리부를 설계 제작한다. 전력 분배기와 하이브리드 결합기로 구성되는 6-단자 소자는 다층형 결합 선로 구조로 이루어지며, 수신부 위상 상관기와 반송파 복원기 그리고 위상 변위기의 기본 구조 요소로 작용한다. 다층형 결합 선로 구조로 구성되는 일원화된 수신 전처리부는 구성이 간단하고 집적화가 용이하다. 설계 제작된 다층형 결합 구조 6-단자 수신 전처리부는 일정한 반송파 신호를 재생하고, PSK 전송 신호를 복원한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.523-526
• /
• 2002

The crosstalk among coupled microstrip lines is the major limiting factors of signal qualities in the high-speed digital and communication equipment. In this paper, a three-dimensional finite difference time domain (FDTD) method is applied to analyze the crosstalk between the coupled microstrip lines. The proposed structures of the coupled microstrip lines are investigated to reduce the coupling in a simple way by modifying their ground plane with an optimum gap. The examples of these structures with the different sizes of the gaps on their ground plane are studied. These structures are considered as the four-port network to evaluate transmission efficiency, near- and far-end crosstalk. Gaussian pulse is excited to evaluate the frequency characteristics from dc to 30 ㎓. The transmission efficiency, near- and far-end crosstalk of each structure of the coupled microstrip lines are demonstrated. The numerical results of this study show that the majority of crosstalk is the far-end crosstalk. The usage of the optimum gap on the ground plane can reduce the far-end crosstalk of the coupled microstrip lines while the transmission efficiency is nearly equal.

• ETRI Journal
• /
• 제27권5호
• /
• pp.643-646
• /
• 2005

This letter proposes a band-pass filter (BPF) with two transmission zeros based on a combination of parallel coupling and end coupling of half-wave transmission lines. The fabricated BPF exhibited a narrow bandwidth and two transmission zeros near the pass-band due to the end-coupled and shielding waveguide. At the center operation frequency of 60 GHz, the 20 dB bandwidth of the BPF is 1.0 GHz, which is almost 2% of the center operation frequency, and the insertion loss is 3.12 dB. Two transmission zeros reach approximately 40 dB at 58.5 and 62.5 GHz. The simulation results almost agree with the measured results.

• 한국전자파학회논문지
• /
• 제17권10호
• /
• pp.935-942
• /
• 2006

본 논문에서는 직렬 커패시터를 넓은 면 결합 SSS로 구현하는 새로운 이론이 제안되었다. 제안된 이론은 기모드 해석 방법만이 적용되었기 때문에 비교적 단순하지만 선로의 프린징 전자장 영향에 의한 유효 선로 폭과 선로 끝 효과를 고려함으로서 신뢰할 만한 결과를 제공한다. 이상적인 집중 소자 커패시터와 결합 선로 커패시터의 특성을 비교, 분석하기 위해 시뮬레이션 결과가 제시되었다. 또한 제안한 이론을 근거로 하여 커패시티브갭 결합 선로 대역 통과 필터가 설계 및 제작되었고, 그 결과로부터 이론의 타당성이 검증되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1086-1088
• /
• 2005

It is necessary to modify the state-of-the-art of vector control theory, because of the phase asymmetry(static end effect) in the Linear Induction Motor(LIM). The dynamic characteristic analysis method of the vector controlled LIM using coupled FEM and control algorithm taking into account the movement is proposed. The focus of this paper is the analysis relative to phenomena of static end effect due to the motor structure. To prove the propriety of the proposed method, the Digital Signal Processor(DSP) installed experimental devices are equipped and the experiment is performed.

• Structural Engineering and Mechanics
• /
• 제41권1호
• /
• pp.67-81
• /
• 2012

Differential Quadrature Method (DQM) is a powerful method which can be used to solve numerical problems in the analysis of structural and dynamical systems. In this study the governing equation which represents the free vibration of coupled shear walls is solved using the DQM method. A one-dimensional model has been used in this study. At the end of study various examples are presented to verify the accuracy of the method.

• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.79-85
• /
• 1999

마이크로 스트립 다중 선로의 고속 디지털 펄스 신호에 대한 상호 결합 특성을 신간영역에서 등가 회로 모델을 사용하여 나타내었다. MMIC 설계시 펄스의 상승시간과 주파수 및 듀티 사이클에 따른 간섭과 누화 특성을 분석하기 위해 SPICE용 알고리즘을 개발하였고, 이 알고리즘에 희한 해석 결과를 Branin 법과 FDTD법에 의한 결과와 비교하여 일치함을 보였다. 해석은 결합 마이크로 스트립 선로의 기하학적 구조에서 펄스의 특성에 따른 전송 특성을 중심으로 나타내었다. 본 논문의 결과는 MIC 나 MMIC 회로 설계시 신호의 주파수와 결합선로의 구조적 문제를 CAD 프로그램에서 직접 해석하여 간섭 효과를 줄이는데 적용할 수 있다.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1383-1391
• /
• 1996

The steady-state response for a coupled structure-acoustic-cavity systme has been investigated by numerical technique using a directly coupled finite element method(FEM) and Boundary Element Method(BEM) model. The Laplace tranformed matrix equations for the structure and the acoustic cavity are coupled directly satisfying the necessary equilibrium and compatibility conditions. The coupled FEM-BEM code is verified by comparing its prediction for an example with known analytical, numerical and experimental results. The example involves a coupled structure-acoustic-cavity system which is a box-type cavity with one end as experimentally excited pinned-pinned plate.

• 정보통신설비학회논문지
• /
• 제2권3호
• /
• pp.48-60
• /
• 2003

With the rapid successful deployment of WLANs worldwide in numerous hotspots for high data rate, wireless access for data services has created the need to integrate the Cellular Networks with WLAN Networks. The integrated wireless environment will provide the end user a much better service experience along with a single subscription and a single bill. In this paper we focus on inter-working approaches, which combine WLANs and Cellular Networks into an integrated wireless environment capable of ubiquitous access to data services and very high data rates in hotspots areas. We first list the key requirements which are currently being standardized within the 30PP for integration with WLANs networks. We discuss two inter-working architectures namely loosely coupled and tightly coupled This paper will detail the loosely coupled inter-working approach while briefly discussing the tightly coupled inter-working. Finally, we will conclude that the loosely coupled approach is evolutionary and less intrusive than the tightly coupled approach.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2694-2698
• /
• 2014

A multisegmented polystyrene (PS) with pH-cleavable ester and carbamate linkages was successfully synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry). ATRP was employed to synthesize polystyrene from hydroxyl-terminated initiator using CuBr/N,N,N',N",N"-pentamethyldiethylenetriamine (PMDETA) as the catalyst. The reaction of the resulting PS with sodium azide yielded the azido-terminated polymer. The hydroxyl group in the other end of the polymer was reacted with 4-nitrophenyl chloroformate (NPC), followed by reaction with propargylamine to produce an alkyne end group with a carbamate linkage. The PS with an alkyne group in one end and an azide group in the other end was then self-coupled in the presence of CuBr/2,2'-bipyridyl (bpy) in DMF to yield a desired multisegmented PS. Molecular weight and molecular weight distribution of the self-coupled polymer increased with time, as in the typical step-growth-type polymerization processes. Finally, we demonstrated that the ester and carbamate linkages of the multisegmented PS were hydrolyzed in the presence of HCl to yield individual PS chains.