• Journal of Life Science
• /
• v.21 no.11
• /
• pp.1586-1591
• /
• 2011

This study was carried out to evaluate the antiobesity effects of Crataegus fructus in 3T3-L1 adipocytes and mice fed a high fat diet (high fat 45% cal). The inhibitory effect of methanol extract from Crataegus fructus on lipid accumulation in 3T3-L1 adipocytes was quantified using Oil red O staining. Compared with the control, lipid accumulation was significantly decreased by 10-25% with treatment with Crataegus fructus extract at a concentration of 600-2,000 ug/ml. Three-week old ICR mice (n=24) were randomly divided into four groups (T0: normal diet, T1: high fat diet, T2: high fat diet and 50 ug of Crataegus fructus extract, T3: high fat diet and 100 ug of Crataegus fructus extract) and were fed an experimental diet for 5 weeks. At the end of the experiment, body weight gain in the T1 group (3.9${\pm}$0.24 g) was higher than that in the T0 group (2.56${\pm}$0.14 g), while body weight gain in the T2 (3.02${\pm}$0.25 g) and T3 (2.58${\pm}$0.16 g) groups was significantly reduced as compared with that of the T1 group. Moreover, liver weight in the T1 (4.8${\pm}$0.17 g) and T2 (4.8${\pm}$0.16 g) groups was significantly higher than that of the T0 (4.05${\pm}$0.16 g) and T3 (4.57${\pm}$0.10 g) groups, while kidney weight was significantly lower than that of the T0 and T3 groups (p<0.05). The levels of total cholesterol and triglyceride in serum in the T2 and T3 groups were significantly decreased compared to the T1 group. These results suggest that Crataegus fructus can be used as functional materials in food and medicine.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.5
• /
• pp.361-367
• /
• 1984

In previous paper(Lee et al., 1984), preparation formula and processing conditions of the fish meat (mackerel) paste using dielectric heating were described, that included the proper shape and size of product and the conditions of dielectric heating, hot air dehydration, and heating with electric heater to yield the minimum expansion and case hardening during heating and to controll the final rater activity of 0.86 to 0.83 accompanying with a complete reduction of viable cells and good texture. In present study, changes in VBN, pH, total plate count, water activity, texture, the loss of available lysine, color indexes, TBA value, and the content of TI were determined to assess the quality stability and shelf-life of the product during the storage for 35 days at $5^{\circ}C\;and\;25^{\circ}C$, respectively. And the effect of vacuum sealing and hot water treatment before storage on the storage stability of product was also mentioned. As the product was vacuum packed in K-flex film bag, heat treated in boiling water for 6 minutes, and stored, water activity was maintained 0.86 to 0.84 for 35 days regardless of storage temperature, and the increase of total plate count was negligible in case of $5^{\circ}C$ storage while tended to gain slightly after 25 days at $25^{\circ}C$ storage. Changes in VBN was also minimum with an increase of 1.5 mg/100g at $5^{\circ}C$ and 7.0mg/100g at $25^{\circ}C$, but in case of unpacked sample, it was 24.5mg/100g at $5^{\circ}C$ and 42.4 mg/100g at $25^{\circ}C$ even after 7 days. In textural property hardness tended to increase after 28 days and folding test score was down to A or B from AA grade. The loss of available lysine was $7.5\%\;at\;5^{\circ}C$ and $17.0\%\;at\;25^{\circ}C$ but brown color was not deeply developed as the color index score indicated. TBA value was not increased at $5^{\circ}C$ while it tended to increase rapidly after 30 days at $25^{\circ}C$. Changes in TI content was not obvious except that it showed a tendency of increase at the end of storage as well as in the change of lysine and TBA value. It is concluded from the results that the quality of the product, pasteurized and water activity controlled by dielectric heating, and vacuum packed in K-flex film would be stable for more than 35 days at $5^{\circ}C$ and at least 25 days even at room temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1164-1168
• /
• 2005

Korean traditional deer decoction (Nogjungtang), composed of oriental herbs and almost deer parts, has been used as an important resource for human health. For basic studying on Nogjungtang, this experiment was conducted to evaluate nutritional effects of Nogjungtang, and estimate its effect on growth, food efficiency, organ development and hematological indices in growing and adult Sprague-Dawley rats. The rats were divided into three groups as follows; control: non-supplementation, Notiungtang I: recommended dose, and Nogjungtang II: thrice recommended dose. Nogjungtang was composed of various general nutrients with up 93$\%$ moisture.Crude protein is the highest value as 22.78$ \%$, Mg is a major mineral as 0.48$\%$ compared to other minerals, and methionine and proline are higher by 1.31 and 1.67$\%$ than other amino acids based on dry matter, re-spectively. In both growing and adult rats, there were no significant difference in body weight gain and feed intake between the control and Nogjungtang groups. Also, organs weights (liver, heart, kidney and stomach) and hematological indices (WBC, RBC, Hb, Hct and Platelet) did not show statistically significant differences among the experimental groups. However, all of experimental rats were normal growth without hypertrophy or negative development of organs by Nogjungtang. Hematological indices maintained in normal value by thrice recommended dose of Nogjungtang. The average body weight of each treatment groups showed similar levels at end of experiment. In case of the feed efficiency ratio (feed intake/body gain), the growing rats showed 6.00, 5.81 and 5.99 and adult rats showed 9.03, 8.98 and 9.10 in control, Nogjungtang I and Nogjungtang II, respectively. In conclusion, although further investigation of Nogjungtang should be performed in the functions registered in many ancient literatures, Nogjungtang is physiologically safe and may have potential as candidate food for human health.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.153-162
• /
• 1996

Rapid maxillary expansion is widely used for the correction of anteroposterior discrepancies, constriction of the maxillary arch, etc. This experiment was undertaken to examine the serial changes in the osteogenesis as well as the collagen fiber bundles in the intermaxillary suture during the rapid maxillary expansion treatment. Four young female dogs aged 6 to 8 months old and not showing menarche yet were used for the experiment. The maxillary impression of dogs were taken, expansion device cast and Hyrax screw soldered at the midline in the 1st premolar area. RME device was delivered to the dogs and the activation of 0.25 mm per quarter-turn was done 2 times per day for 10 days until 5 mm separation was made. Separation of the maxilla was confirmed by X-ray. The animals were sacrificed on 0, 15, 30, 60 days from the finish of maxillary separation and preparations for light microscopy and surface electron microscopy were made. The sutures were cut into frontal serial sections for examination of the histological reactions. The following results were obtained and the conclusions made. 1. The edges of the two palatal plates bordering the midpalatal suture which at the beginning of the retention period were mainly composed of compact bone, underwent extensive resorption followed by new bone formation and gradually became spongy bone rich in bone marrow which in the 60 day retention animal became the compact bone with short intermaxillary suture space. During this transformation, newly formed trabecular bone tissues were added to the original margin. 2. Throughout the expansion period, the collagen fibers underwent successive changes such as stretching, loss of polarity, and finally fibrillogenesis. Towards the end of the expansion procedure, sharpey's fiber formation in newly formed bones were observed. 3. Bony spicules were found in the initial stage of retention on occlusal topographic X-rays, which later were confirmed to have ossified. 4. Judging from the histological changes occuring during the experimental expansion, excessive expansion will cause an excessive bleeding, and retard the remodeling of intermaxillary suture. According to the above results, the bone remodeling after rapid maxillary expansion was preceded by the migration of migratory cells into the intermaxillary suture area. The bone remodeling phenomena were on-going during the 2 months retention sample.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.501-509
• /
• 2012

The dietary intake of whole grains is known to reduce the incidence of chronic diseases such as obesity, diabetes, cardiovascular disease, and cancer. In our previous study, hog millet (HM, $Panicum$ $miliaceum$ L.) water extract showed the highest anti-lipogenic activity among nine cereal types in 3T3-L1 cells. In this study, the effect of hog millet water extract on hepatic steatosis and lipid metabolism in mice fed a high fat diet was investigated. Mice were fed a normal-fat diet (ND), high-fat diet (HFD) or HFD containing 1% or 2% (w/w) HM for 7 weeks. Body weight and food intake were monitored during the study period. Insulin resistance by homeostasis model assessment (HOMA-IR), fasting lipid profile, hepatic fatty acid metabolism-related gene expression determined, and intraperitoneal glucose tolerance test (IGTT) were performed at the study's end. The results indicated that 1% and 2% HM diets effectively decreased liver weights, blood TG and T-cholesterol levels (p<0.05), while the HDL-cholesterol level was increased (p<0.05) compared to HFD-induced steatotsis mice. Hepatic lipogenic-related gene ($PPAR{\alpha}$, L-FABP, and SCD1) expressions decreased, whereas lipolysis- related gene (CPT1) expression increased in animals fed the 2% PME diet (p<0.05). In addition, mice fed 1% or 2% HM diet had markedly decreased IGTT and HOMA-IR, compared to the those of the HFD-induced hepatic steatosis control group (p<0.05). These results indicated that HM inhibited hepatic lipid accumulation by regulating fatty acid metabolism, and suggested that HM is useful in the chemoprevention or treatment of high fat-induced hepatic steatosis and hepatic steatosis-related disorders including hyperlipidemia, glucose sensitivity, and insulin resistance.

• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.83-90
• /
• 2003

This study was conducted to determine the effects of stocking density on performance and physiological responses of egg-type breeder layers in cages. A total of 264 Hy-Line Brown egg-type breeder layers at the age of 32 weeks were divided into 4 groups with 3 replicates of 22 birds (20 females, 2 males) per replicate and assigned to four stocking density treatments with 22 birds per cage with different sizes (980, 735, 640 and 560 $\textrm{cm}^2$/bird). The birds were fed the same experimental diet ad libitum for 12 weeks, and laying performance, egg and eggshell qualities, fertility and hatchability were determined. At the end of the experimental period, 9 birds were selected in each treatment in order to measure the scores of plumage condition. Antibody titers to Newcastle disease and infectious bronchitis were also determined. No significant differences were observed in laying performances, eggshell strength, Haugh unit, fertility and hatchability among the treatments. In birds housed 640 $\textrm{cm}^2$ per bird, eggshell thickness were significantly lower (P<0.05) than those of the other groups from 7 to 12 weeks. There was no significant difference in antibody titers to Newcastle disease. In birds housed 980 $\textrm{cm}^2$ per bird, antibody titers to infectious bronchitis were significantly (P<0.05) higher than those of the other groups. With increase in the level of stocking density, the scores of plumage condition were also significantly decreased (P<0.01). This study demonstrated that moderate increment of stocking density did not resulted in reduction in laying-performances of egg-type breeder layers. However, it seemed that the higher stocking density might give more stress to the birds from physical stimuli and thus were harmful environment causing higher mortalities compared to the lower ones.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.710-718
• /
• 2009

Background: The Cox maze procedure has been used as a standard surgical treatment for atrial fibrillation for about 20 years. Recently, the creators have used a bipolar radiofrequency electrode (Cox maze IV procedure) instead of the incision and suture (cut-sew) technique to make atrial ablation lesions for persistent atrial fibrillation. We investigated clinical outcomes for the Cox maze procedure with a bipolar radiofrequency electrode and cryoablator in patients with persistent atrial fibrillation, and compared results with clinical outcomes of the cut-sew procedure. Material and Method: Between April 2005 and July 2007, 40 patients with persistent atrial fibrillation underwent Cox maze IV procedure with a bipolar radiofrequency electrode and cryoablator (bipolar radiofrequency group). Surgical outcomes were compared with those of 35 patients who had the cut-sew technique for the Cox maze III procedure. All patients had concomitant cardiac surgery. Postoperatively, the patients were followed up every 1 to 2 months. Result: At 6 months postoperatively, the conversion rate to regular sinus rhythm was not significantly different between the two groups: 95.0% for the bipolar radiofrequency ablation group; 97.1% for the cut-sew technique (p=1.0). At the end of the follow-up period, the conversion rate to regular sinus rhythm was also not significantly different (92.5% vs. 91.6%, p=1.0). In multivariate analysis using a Cox-regression model, the postoperative atrial dimension was an independent determinant of sinus conversion in the bipolar radiofrequency ablation group (hazard ratio 31, p=0.005). In the Cox-regression model for both groups, atrial fibrillation at 6 months postoperatively (hazard ratio 92.24, p=0.003) and the postoperative left atrial dimension (hazard ratio 16.05, p=0.019) were independent risk factors of continuance or recurrence of atrial fibrillation after Cox maze procedures. Aortic cross-clamp time and cardiopulmonary bypass time were significantly shorter in the radiofrequency group than in the cut-sew group. Conclusion: In the Cox maze procedure for patients with persistent atrial fibrillation, the use of bipolar radiofrequency ablation and a cryoablator is as good as the cut-sew technique for conversion to sinus rhythm. The postoperative left atrial dimension is an independent determinant of postoperative continuance and recurrence of atrial fibrillation.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.139-143
• /
• 2006

Virion captured reverse transcription polymerase chain reaction (VC/RT-PCR) could detect plant virus quickly and accurately. In the VC/RT-PCR, no antibody is needed unlike immuno-captured RT-PCR (IC/RT-PCR) which had been improved method of RT-PCR for plant viruses, and virus nucleic acids can be obtained easily within 30minutes by property of polypropylene PCR tube which is hold and immobilized viral particles on its surface. For the virion capture of Tomato spotted wilt virus (TSWV), the extraction buffer was tested. The optimum macerating buffer for TSWV was 0.01M potassium phosphate buffer, pH 7.0, containing 0.5% sodium sulfite. The viral crude sap was incubated for 30 min at $4^{\circ}C$. The virions in the PCR tubes were washed two times with 0.01M PBS containing 0.05% Tween-20. The washed virions were treated at $95^{\circ}C$ immediately for 1 min containing RNase free water and chilled quickly in the ice. Disclosed virions' RNAs by heat treatment were used for RT-PCR. Dilution end point of $10^{-5}$ from plant's crude sap infected with TSWV showed relatively higher detection sensitivity for VC/RT-PCR. During multiple detection using two or more primers, interference was arisen by interactions between primer-primer and plant species. The result of multiplex RT-PCR was influenced by combinations of primers and the kind of plant, and the optimum extraction buffer for the multiplex detection by VC/RT-PCR should be developed.

• Korean Journal of Head & Neck Oncology
• /
• v.24 no.1
• /
• pp.57-63
• /
• 2008

Background and Purpose：Nausea, vomiting and weight loss are common problems that are encountered in the course of cancer patient treatment who are receiving radiotherapy. In this study, we are aiming to analyze the effect of megestrol acetate on quality of life of head and neck cancer patients receiving radiotherapy, resulting from improvement of weight loss, appetite and nutritional status via multicenter, open-labeled, observational clinical trial. Material and Methods：A total of 270 patients from 10 medical institutes who are receiving radiotherapy or who have completed radiotherapy within 3 months, between February 2007 and February 2008, were selected as candidates for the study. Megestrol acetate suspension(megace) was given to the subjectives once a week for 4 weeks with the amount of 20ml(megestrol 800mg). Measurement of weight and questionnaire surveys were carried out three times: at the start of the study, 4 weeks after the start of the medication, and 4 weeks after the end of the medication, respectively. Results：The group who has received megace had a total number of 199, and control group was 70. The group who have received megace showed mean weight loss of 1kg in 8 weeks, compared with the weight loss of 5.5kg in control group, which showed that the medication was effective in reducing the amount of weight loss(P=0.027). The group who received megace had a tendency to report a reduced rate of decrease in the score of appetite, nausea and vomiting, and QOL score, but it did not have statistical significance(P>0.05). Conclusion：Megestrol acetate have reduced the degree of weight loss significantly, and it has a tendency to reduce the rate of decrease in appetite, aggravation of nausea and vomiting, and quality of life.