• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.294-299
• /
• 1998

To prove pseudo-homopolymerization(PHP) method indirectly for general system which includes more than one growing radicals per particle, Mayo-Lewis equation of bulk copolymer system was derived form probability equation about instantaneous copolymer composition of emulsion copolymer system during interval II. From Extended Smith-Ewart equation proposed by Ballard et al. in emulsion copolymerization, exact solution was obtained for 0-1 system (i.e., the system containing no more than one growing radical per particle). From the exact solution, average number of radicals per particle and instantaneous copolymer composition were predicted to reach the steady state which a few minutes. So the reliability of this approximation method could by proved directly for 0-1 system. Styrene-butadiene(St-Bu) and Styrene-methyl methacrylate (St-MMA) system were used for model calculations.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.60-66
• /
• 1993

Aqueous polyurethane(PU) anionomer dispersions were prepared from isophorone diisocyanate (IPDI), polytetramethylene adipate glycol(PTAd) and dimethylol propionic acid(DMPA) as potential anionic centers. The effects of polyol molecular weight(Mn) on the state of dispersion, thermal, mechanical, and viscoelastic properties and swelling of emulsion cast film were determined. With increasing Mn of PTAd, particle size of emulsion and soft segment T$_{g}$ decreased, and solvent swell, emulsion viscosity, and hard segment $T_{g}$ increased. Tensile strength showed minimum with PTAd 1000, and elongation at break generally increased with the Mn of PTAd. These results were possibly nterpreted in terms of soft segment-hard segment phase separation and crystallization of high molecular weight PTAd.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.spc
• /
• pp.63-73
• /
• 2010

Solid lipid nanoparticles (SLNs) have emerged to combine the advantages of polymeric nanoparticles and lipid emulsions in early 1990s. SLNs can present several desirable properties derived from the solid state core. When formulating SLNs, there should be careful considerations about the physical state of the inner solid lipid core and its polymorphism and supercooling behavior. In this review, SLNs were compared to lipid emulsion and emulsion of supercooled melt to understand the unusual behaviors compared to lipid emulsions and to have insights into stability and release mechanism. SLNs have been regarded as biocompatible system because lipids are usually well-tolerable ingredients than polymers. Several studies showed good tolerability of SLNs in terms of cytotoxicity and hemolysis. Similar to various other nanoparticulate drug delivery systems, SLNs can also change biodistribution of the incorporated drugs in a way to enhance therapeutic effect. Most of all, large scale production of SLNs was extablished wihtout using organic solvents. Although there is no SLN product in the market till date, several advantagious properties of SLNs and the progress we have seen so far would make commercial product of SLNs possible before long and encourage research community to apply SLN-based formulations for water-insoluble drugs.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.152-159
• /
• 2013

Experiments of emulsion particles state of using polyglycerol ester emulsifier and the stability in accordance with the change of time were conducted using several oil. Experimental results confirmed that there is little difference in the stability and particle size depending on the type of oil. Most stable oil with polyglycerol ester is polar oil of silicon series and fatty acid ester oil, hydrocarbon oil of the nonpolar oil (Mineral oil, squalane, polydecene) was the most unstable state. And vegetable oils showed the stable form of particles with polyglycerol ester emulsifier.

• Journal of Environmental Science International
• /
• v.7 no.6
• /
• pp.875-881
• /
• 1998

Microemulsion is prepared by the method of phase inversion emulsification with d-limonene that is environmental friendly substance and nontoxic to human body as dispersed phase. Emulsifier used for preparation of microemulsion is nonionic surfactants, polyoxyethylene nonylphenyl ether. Stability of prepared microemulsion was estimated by the various method of ξ-potential, hydrodynamic diameter and electric conductivity. When d-limonene is emulsified by NP series, microemulsion is most stable and narrowly distributed at HLB value of 12.3(either one emulsifier or mixed emulsifiers). Stability of microemulsion is increased as the amount of emulsifiers is increased at same HLB value of 12.3. In the case of using the same amount of emulsifiers, number of produced micelle are relatively large as hydrodynamic diameter is small. Therefore, the state of microemulsion is stable and the electric conductivity is increased. One can determine that higher electric conductivity value means that microemulsion has more micelles and is more stable.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.338-342
• /
• 1999

It has been proven in previous work that rosin sizing agents are distributed relatively homogeneously on the outer surface of paper. Therefore, rosin sizing agents on paper surfaces can be characterized by macro domain measurement techniques with very thin layer from the surface. In this work, the role of rosin sizing agents on paper surface was investigated by comparing wettability from contact angle measurement with the chemical state of the outermost surface by the ESCA. Furthermore, the role of rosin on the surface of paper was discussed by the quantity of hydroxyl groups obtained from chemical modification with the TFAA-ESCA technique. It was found from the ESCA data that the fixing mechanism with soap-type rosin sizing is different from that with emulsion-type rosin sizing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1121-1126
• /
• 2000

The purpose of this study is to clarify chemical resistance of polymer-cement slurry coated reinforcing bars. Polymer cement slurry coated reinforcing bars were showed the good state to the bending resistance, impact resistance, adhesive strength, but exact data of the chemical resistance do not exist. Through the experimental, it is to certify chemical resistance of polymer cement slurry coated reinforcing bars. In this study, polymer cement slurry coated reinforcing bars are prepared with two types of polymer, polymer-cement ratios of 50%, 100%, 150%, coating thickness, curing periods of 3, 7, 28days, and tested for chemical resistance as KS(Korea Standard). From the test results, chemical resistance of polymer cement slurry coated reinforcing bars used by acrylic and St/BA emulsion were showed excellent without concerned polymer-cement ratios, curing period except for 1% aqueous solution $H_2SO_4$. But polymer cement coated reinforcing bar used by acrylic emulsion is inferior to aqueous solution NaOH.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.70-76
• /
• 1995

Research was conducted at the Wood Materials and Engineering Laboratory, Washington State University, Pullman, WA to evaluate the effects of the sequence of wax addition, wax level, and wax type on mechanical properties and water resistance performance of isocyanate-bonded particleboard. Mechanical properties and water resistance performance were not influenced significantly by the sequence of wax addition. Internal bond and wet modulus of rupture in bending strength were decreased significantly by increasing the wax emulsion level, but dry modulus of rupture and modulus of elasticity in bending strength were not decreased significantly by increasing the wax emulsion level. Dry internal bond, dry and wet moduli of rupture, and modulus of elasticity were not decreased by increasing the solid wax level except for wet internal bond. The addition of 1.0 and 1.5% wax level did not produce any significant additional water resistance effect when compared to the addition of 0.5% wax level. Internal bond values of boards with solid wax addition showed significantly better results than boards with just a wax emulsion added. Modulus of rupture, modulus of elasticity, and water resistance performance did not show significant difference between solid wax and wax emulsion.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1114-1119
• /
• 1998

The stabilities of O/W emulsions (lipophilic core material:lipophobic wall material=3:2, w/w) containing various kinds of emulsifiers were compared to determine the optimal conditions of the HLB (hydrophilic lipophilic balance) value, the concentration and composition of emulsifier, the ratio of core material to the wall material, and the concentration and composition of polymers in the wall material. The effect of different chemical types of emulsifiers and the influence of single vs. binary emulsifier systems were compared with 13 kinds of emulsifier HLB values of $0.6{\sim}16.7$ at the concentration of 0.50%(w/w). The emulsion system was stable (more than 99.0 of ESI value) when the HLB value of the emulsifier was more than 11.0 or less than 2.8 of emulsifier HLB value. But it was unstable (less than 40.0 of ESI value) at the HLB value of the emulsifier between 3.4 and 8.6. Especially, we could find out the emulsion containing the emulsifier of polyglycerol polyricinoleate (PGPR, HLB 0.6) became stable creamy state. And, the ESI value of binary emulsifier system containing 0.25%(w/w) of PGPR and 0.25%(w/w) of polyoxyethylene sorbitan monolaurate (PSML, HLB 16.7) was higher than that of any single emulsifier system at the concentration of 0.50%(w/w). The highest emulsion stability was obtained in the liquefied wall material composed of 0.25%(w/v) of waxy corn starch and 0.50%(w/v) of agar.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.209-217
• /
• 2012

One of the popular formulations is microemulsion in cosmetics. A kind of microemulsions is liquid crystal emulsion. Liquid crystal emulsion is used by wrapping functional ingredients. As the meaning of the name, Liquid crystals (LCs) are a state of matter that has properties between those of a conventional liquid and those of a solid crystal. There are various types of Liquid crystals (LCs) consisting of micelles or two layer structures of surfactants. Recently, microemulsion has been studied to improve its stability in thermodynamics of colloid science field. In this study, we prepared the microemulsion with PEG-8 Capryliccapric Glycerides and Polyglyceryl-3 Diisostearate. We studied the microemulsion with different oil types and different and cosurfactant content ratio. Also, the aim of this study is to develop a facial oil or a cleansing oil containing liquid crystal emulsion with functional ingredients.