• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.39-45
• /
• 2012

For a fundamental study for high concentration pigment coating, the effects of alkali swellable emulsion (ASE) type rheology modifier and surface adsorption emulsion (SAE) type rheology modifier on both the stability and the viscoelastic behavior of a coating color were elucidated. The coating color prepared with SAE type rheology modifier showed superior thermal and mechanical stability than that with ASE type. In the high concentration and high speed coating process, the mechanical stability of a coating color was a key parameter since both impact force and shear force were increased with the increase of coating color concentration and coating speed, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.119-131
• /
• 2012

The W/O emulsion is widely used for cosmetics because of its water-proofing benefit and long-lasting moisturizing effect. However, because of low stability of the W/O emulsion, it is very important to control the concentration of electrolyte and emulsifying agent, and ratio of water phase. Among these factors, we focused on the effects of different structures of emulsifying agents on the change of stability. Emulsifying agents were sorted into polyglyceryl ester, silicone and sugar series. We also examined the emulsifyingability of emulsifier by changing the ratio of normal and silicon oil in the oil phase. Through these experimental results, we figured out the property of w/o emulsion depending on the types of emulsifiers, and observed the stability of emulsion considering the change of particles and viscosity over time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1434-1438
• /
• 2006

The purpose of this study was to make soy milk without using any food additives. First, it was attempted to find the effects of homogenizing pressure on the emulsion stability of soy milk without addition of monoglyceride. The soy milk was made with the ratio of bean and water as 1:8, and the yields of soy milk was measured to be 5.87 fold of the beans used. lifter making soy milk by differentiated pressure of the homogenizer at $50kg/cm^2,\;100kg/cm^2,\;150kg/cm^2\;and\;200kg/cm^2$, general composition of the center part of soy milk was analysed. The analysis results indicated that the lipid content increased by the increase of the emulsion pressure. Moreover, the suspension stability, emulsion stability and viscosity also increased by the increase of the emulsion pressure. Therefore, we thought that the production of soy milk without adding any emulsifier was possible only by homogenizing at higher pressure over $150kg/cm^2$.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.618-626
• /
• 2012

Citrus (Citrus unshiu S. Marcoy) industry by-products were used as a source of dietary fiber, and the effects of dietary fiber extracted from citrus peel on the proximate composition, pH, color, protein solubility, cooking loss, emulsion stability, and apparent viscosity of a chicken emulsion in model systems were examined. Chicken emulsions were prepared by adding citrus peel fiber at four different concentrations (1, 2, 3, and 4%). The apparent viscosity, redness, and yellowness of the chicken emulsion with citrus peel fiber were higher than those of the control (p<0.05). The lightness values of the chicken emulsions were lower in treatments containing citrus peel fiber (p<0.05). Furthermore, moisture content, cooking loss, and emulsion stability of the chicken emulsion with 1-2% citrus peel fiber were higher than those of other treatments (p<0.05). Fat content was lower in the treatments with added citrus peel fiber than that in the control (p<0.05). Chicken emulsions with added citrus peel fiber had improved quality characteristics, and the best results were obtained for the chicken emulsion with 2% added citrus peel fiber.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.376-384
• /
• 2017

The objective of this study was to investigate the effect of using gelled emulsion (olive oil 46%, inulin 9%, gelatin 3%) as fat replacer on some quality parameters of chicken patties. For this purpose GE, prepared with olive oil, gelatin and inulin was replaced with beef fat at a level of 0%, 25%, 50%, 100% (C, G25, G50, G100). In this study syneresis, thermal stability, centrifuge and creaming stability of gelled emulsion were analyzed. Chemical composition, technological paramerers (cooking yield, water holding capacity, diameter reduction, fat and moisture retention) and textural and sensory properites were evaluated in comparision to control patties. High thermal stability was recorded in GE (93%), also creaming stability results showed that GE protected its stability without any turbidity and separation of the layer. The complete replacement of beef fat with GE showed detrimental effect on all investigated cooking characteristics except fat retention. Replacement of beef fat with GE at a level of 50% resulted similar cooking characteristics with C samples. Color parameters of samples were affected by GE addition, higher CIE $b^*$ values observed with respect to GE concentration. The presence of GE significantly affected textural behaviors of samples (p<0.05). Our results showed that GE prepared with inulin and olive oil is a viable fat replacer for the manufacture of chicken patty.

• KSBB Journal
• /
• v.27 no.4
• /
• pp.207-214
• /
• 2012

Emulsions are mixture of immiscible liquids in which one is dispersed in all over the other. They have been applied to many applications including cosmetics, foods, drug delivery system (DDS), fine chemicals, and chemical separations. Especially, emulsion technology is one of the most useful technique to formulate cosmetics such as eye cream, foundation, and foam cleansing. In general, the emulsions can be generated by mechanical agitation of two immiscible fluids. However, the emulsions obtained by conventional method have limited in stability, monodispersity, and complicate process. We describe here preparation techniques of representative cosmetic emulsions such as liposome, liquid crystal emulsion, nanoemulsion, multiple emulsion, and pickering emulsion. Furthermore, various factors which can control the physical properties of each cosmetic emulsions are briefly discussed.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.910-917
• /
• 2010

Makgeolli lees is a jigaemi by product produced by makgeolli brew processing. Jigaemi has high fiber content and therefore can potentially be used in the development of foods rich in dietary fiber. The effects of makgeolli lees fibers on the composition and physico-chemical properties of chicken emulsion systems were studied. The moisture and ash contents, yellowness, and viscosity of chicken meat emulsion systems with makgeolli lees fiber were all higher than those of control. Moreover, chicken batters supplemented with makgeolli lees fiber were characterized by lower cooking loss and better emulsion stability. Chicken emulsion systems with makgeolli lees fiber also had improved emulsion stability and emulsion viscosity, and the best results were obtained with meat batter containing 2% makgeolli lees fiber.

• Applied Chemistry for Engineering
• /
• v.28 no.6
• /
• pp.670-678
• /
• 2017

Self-emulsifiable polyethylene (PE) wax was prepared using acrylic acid grafted PE wax with potassium hydroxide and various emulsifiers for the economic production of PE wax emulsion. Modification reaction completion was confirmed that the peak from carbonyl group of acrylic acid disappeared and the new peak from carboxylic acid salts appeared in the FT-IR (Fourier transform infrared) spectrum data. Self-emulsifiable properties of the modified PE wax were investigated by the emulsion size and the stability of wax emulsion without any additional emulsifiers. According to self-emulsifiable properties, the emulsion size and stability were varied on the concentration and structure of the emulsifier. The greater emulsion concentration and hydrophilic poly(ethylene oxide) (PEO) characteristics of the emulsifier resulted in the smaller emulsion size and better emulsion stability. In addition, the use of emulsifiers mixture was more effective to obtain smaller size and uniform distribution of emulsion than that of single emulsifier in PE wax modification reaction. Especially, modified PE wax with OAE-5 and LAE-15 emulsifiers mixture shows excellent performance in terms of the smallest emulsion size ($4.34{\mu}m$) and emulsion stability.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.2
• /
• pp.65-70
• /
• 1997

The symmetric naphthothiazolo carbocyanine is of industrial importance as red-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film-making. The stability on the solvents of naphthothiazolo carbocyanine dye was measured by UV-Vis spectrophotometer, and then all of solvents were stabilized sensitizer. The maximum absorption peak range in various solvents was $600nm{\sim}612nm$. But it was identified that only methanol can be used to photographic emulsion.