• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.376-384
• /
• 2017

The objective of this study was to investigate the effect of using gelled emulsion (olive oil 46%, inulin 9%, gelatin 3%) as fat replacer on some quality parameters of chicken patties. For this purpose GE, prepared with olive oil, gelatin and inulin was replaced with beef fat at a level of 0%, 25%, 50%, 100% (C, G25, G50, G100). In this study syneresis, thermal stability, centrifuge and creaming stability of gelled emulsion were analyzed. Chemical composition, technological paramerers (cooking yield, water holding capacity, diameter reduction, fat and moisture retention) and textural and sensory properites were evaluated in comparision to control patties. High thermal stability was recorded in GE (93%), also creaming stability results showed that GE protected its stability without any turbidity and separation of the layer. The complete replacement of beef fat with GE showed detrimental effect on all investigated cooking characteristics except fat retention. Replacement of beef fat with GE at a level of 50% resulted similar cooking characteristics with C samples. Color parameters of samples were affected by GE addition, higher CIE $b^*$ values observed with respect to GE concentration. The presence of GE significantly affected textural behaviors of samples (p<0.05). Our results showed that GE prepared with inulin and olive oil is a viable fat replacer for the manufacture of chicken patty.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.865-871
• /
• 2016

The objective of this study was to investigate the effects of canola and flaxseed oils on the physicochemical properties and sensory quality of emulsion-type sausage made from spent layer meat. Three types of sausage were manufactured with different fat sources: 20% pork back fat (CON), 20% canola oil (CA) and 20% flaxseed oil (FL). The pH value of the CA was significantly higher than the others (p<0.05). The highest water holding capacity was also presented for CA; in other words, CA demonstrated a significantly lower water loss value among the treatments (p<0.05). CA had the highest lightness value (p<0.05). However, FL showed the highest yellowness value (p<0.05) because of its own high-density yellow color. The texture profile of the treatments manufactured with vegetable oils showed higher values than for the CON (p<0.05); furthermore, CA had the highest texture profile values (p<0.05) among the treatments. The replacement of pork back fat with canola and flaxseed oils in sausages significantly increased the omega-3 fatty acid content (p<0.05) over 15 to 86 times, respectively. All emulsion sausages containing vegetable oil exhibited significantly lower values for saturated fatty acid content and the omega-6 to omega-3 ratios compared to CON (p<0.05). The results show that using canola or flaxseed oils as a pork fat replacer has a high potential to produce healthier products, and notably, the use of canola oil produced characteristics of great emulsion stability and sensory quality.

• Food Science of Animal Resources
• /
• v.38 no.2
• /
• pp.315-324
• /
• 2018

The objective of this study was to evaluate the efficacy of alkaline-treated sugarcane bagasse fiber on physicochemical and textural properties of meat emulsion with different fat levels. Crude sugarcane bagasse fiber (CSF) was treated with calcium hydroxide ($Ca(OH_2)$) to obtain alkaline-treated sugarcane bagasse fiber (ASF). The two types of sugarcane bagasse fiber (CSF and ASF) were incorporated at 2% levels in pork meat emulsions prepared with 5%, 10% and 20% fat levels. Alkaline-treatment markedly increased acid detergent fiber content (p=0.002), but significantly decreased protein, fat, ash and other carbohydrate contents. ASF exhibited significantly higher water-binding capacity, but lower oil-binding and emulsifying capacities than CSF. Meat emulsions formulated with 10% fat and 2% sugarcane bagasse fiber had equivalent cooking loss and textural properties to control meat emulsion (20% fat without sugarcane bagasse fiber). The two types of sugarcane bagasse fiber had similar impacts on proximate composition, cooking yield and texture of meat emulsion at the same fat level, respectively (p>0.05). Our results confirm that sugarcane bagasse fiber could be a functional food ingredient for improving physicochemical and textural properties of meat emulsion, at 2% addition level. Further, the altered functional properties of alkaline-treated sugarcane bagasse fiber had no impacts on physicochemical and textural properties of meat emulsions, regardless of fat level at 5%, 10% and 20%.

• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2017

PURPOSES : Emulsified asphalt is critical for road construction. The objective of applying asphalt emulsion as an adhesive is to prevent the phenomenon of debonding between the upper and lower layers. The quantity and veriety of bituminous material can be varied according to the type of pavement and site conditions. The objective of this study is to reveal the optimum application rates of the emulsified asphalt materials by types of tack-coats using Interface Shear Strength(ISS). METHODS : In the research, emulsified asphalt was paved on the surface of the divided mixture. The specimens of paving asphalt emulsion were utilized to evaluate the bond strength of tack-coat materials. In the evaluation process, NCHRP Report 712 was utilized to investigate the Interface Shear Strength, which reflects the bond capacity of asphalt emulsion. Then, the optimum residual application rates by tack-coat types were determined using regression analysis. RESULTS :As a consequence of squared R values investigated from 0.7 to 1 as part of the regression analysis, the tendency of predicted ISS values was compared with the results. The optimum residual application rates of AP-3, RS(C)-4, QRS-4, and BD-Coat were determined to be $0.78{\ell}/m^2$, $0.51{\ell}/m^2$, $0.53{\ell}/m^2$, and $0.73{\ell}/m^2$, respectively, utilizing 4th regression analysis. CONCLUSIONS :Based on the result of this study, it was not feasible to conclude whether higher residual application of tack-coat material leads to improved bond capacity. Rather, the shearing strength varies depending on the type of pavement.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1404-1410
• /
• 2009

Chestnut flours (CFs) were produced from 3 chestnut samples (Aydin, Kutahya, and Bursa) by 2 different methods (boiled and oven-dried: BOD-CF and freeze-dried: FD-CF). Functional properties and effects of CF addition (10, 20, and 30%) on the qualities of regular and low-fat cookie were investigated. The freeze drying significantly increased water solubility of CFs but decreased their water binding capacity. The emulsion capacity and stability of FD-CFs were higher than those of BOD-CFs. At pH 4, 6, 8, and 10 FD-CFs had better gelation properties. Spread ratio (SR) values of BOD-CF supplemented regular or low-fat cookies decreased with increasing CF levels. Hardness values of CF supplemented regular cookies were generally lower compared to control. SR and hardness values of FD-CF supplemented cookies were higher than those of BOD-CF supplemented ones. Surface colors of the cookies were darker with FD-CF addition as compared to BODCF addition. In low-fat cookies, the sample supplemented with 10% Kutahya FD-CF had the highest taste-flavor value. FDCF supplementation generally resulted in higher appearance and taste-flavor scores than BOD-CF supplementation in cookies.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.46-50
• /
• 1998

This study was peformed to improve extraction of insoluble proteins and to evaluate funtional properties of abolished proteins by the phytase produced by Asporgillus sp. The optimum pH, temperature, treatment time and unit of the enzyme for extraction of protein were pH 4.0~5.0, $50^{\circ}C$, 8~10 hrs and 120 units. The foaming capacity and foaming stability of sesame meal protein after enzyme treatment were virtually unchanged as compared to control. The emulsion capacity and emulsion stability of sesame meal protein was higher than control. Oil absorption as well as water absorption capacities of sesame meal protein were higher than control.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.924-930
• /
• 1999

To extract insoluble proteins and improve physical properties of proteins, the sesame meal proteins was irradiated with $5\;kGy{\sim}20\;kGy$ at room temperature. The highest extraction rate of sesame meal protein was showed at irradiation dose of 5 kGy. The foaming capacity, foaming stability, emulsion capacity and emulsion stability of gamma irradiated sesame meal protein (GISP) were all increased as compared to those of the non-irradiated protein. Water absorption capacity of GISP was similar to that of non-irradiated protein and oil absorption capacity of GISP was decreased after treatment by gamma irradiation.

• The Korean Journal of Ceramics
• /
• v.5 no.3
• /
• pp.250-254
• /
• 1999

Synthesis of the spinel $LiMn_2O_4$ by emulsion method was investigated. $LiOH.H_2O \;and \;Mn(NO_3)_2.6H_2O$ were used as starting materials to prepare mixed aqueous solution (0.5 mol/$\ell$ for the $LiMn_2O_4$). Kerosene, paraffin oil and span 80 were used for organic phase. The aqueous solutioin and organic phase were mixed in the ratio of 2:1 and emulsified at the speed of 4000 rpm for 5 min. The prepared emulsions were dropped into the petroleum heated at $170^{\circ}C$ to evaporate water in the silicon oil bath, dried at $120^{\circ}C$ in the oven the remove petroleum and calcined at temperature ranges from 600 to $900^{\circ}C$ for 48 hrs. The characteristics of powders were investigated by XRD, SEM, BET and electrochemical properties of synthesized cathode materials were measured with Galvanostatic system. $Li_{1.05}Mn_2O_4$ calcined at $800^{\circ}C$ for 48 hrs showed initial discharge capacity of 125.9mAH/g.

• Journal of Applied Biological Chemistry
• /
• v.42 no.4
• /
• pp.180-185
• /
• 1999

Protein concentrate was produced and succinylated from rice bran to assess and improve its functional properties for the purpose of expanding the uses of rice bran proteins. The most effective solvent for the extraction of rice bran proteins was 20% aqueous ethanol at pH 9. The protein content of rice bran protein concentrate produced was 70.0% and the total protein yield was 64.3%. The extent of succinylation of free amino groups in the modified products was 72.8%. Though the modified protein products showed good functional properties including solubility, emulsion properties, and oil absorption capacity, it did not form gel. Succinylation improved solubility and emulsion and gelling properties. These improvements in functionality will enhance the value of rice bran proteins, thus enabling them to be more competitive with other food proteins.

• Food Science of Animal Resources
• /
• v.35 no.3
• /
• pp.315-321
• /
• 2015

The aim of the present work was to investigate the effect of NaCl concentration on the emulsifying and rheological properties of porcine myofibrillar protein (MF)-stabilized soybean oil and fish oil emulsion (SO-EMs and FO-EMs). Emulsions (EMs) were prepared from 1% MF with 10% SO or FO at various NaCl concentration (0-0.5 M). The emulsifying ability index (EAI) of the EMs increased with increasing NaCl concentration for both oil types. Conversely, increasing NaCl manifested decrease in the emulsion stability index (ESI). In addition, creaming index (CI) also increased with NaCl concentration. From the microscopic observation, droplets of the EMs were more aggregated at relatively higher NaCl concentrations, especially for FO-EMs. All EMs had a gel-like structure owing to G' > G" from the rheological analysis. Comparing the oil types, the emulsifying capacity of SO-EMs was more stable than that of FO-EMs at all NaCl concentrations as determined from the CI value and microscopic observation. Therefore, it can be concluded that SO-EMs and FO-EMs are more stable at relatively lower concentrations of NaCl. In addition, the dispersed stability of SO-EMs was better than that of FO-EMs at the same concentration of NaCl.