• Membrane and Water Treatment
• /
• 제4권1호
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.242-246
• /
• 2004

화염분무열분해(FSP) 공정을 이용하여 결정질의 좁은 입도분포를 가지는 $\alpha$-알루미나 나노입자를 제조하였다. 초미분의 액적을 형성시키기 위해 전구체 용액으로서 연료인 등유를 연속상으로 하고 산화제인 알루미늄 질산염 수용액을 분산상으로 하는 유중수적(W/O)형의 마이크로에멀전을 제조하였다 0.5M 농도의 알루미늄 질산염 수용액을 10vol%, 등유 80vol%, 그리고 유용성 유화제 10vol%를 혼합하여 안정한 분산상태를 가지는 마이크로에멀전을 제조한 후, 이류체 노즐 분무기를 사용하여 0.03㎫의 공기 압력으로 분무하여 화염에 직접 노출시켰다. 제조된 생성물은 20에서 30 나노미터의 균일한 크기를 가지는 $\alpha$-알루미나 상으로 확인되었다.

• 한국응용과학기술학회지
• /
• 제3권1호
• /
• pp.65-71
• /
• 1986

Four amphoteric surfactants, 1-(N-alkyl-N,N-dimethyl ammonio)-4-naphthalene sulfonates, were prepared by the alkylation of 1-(N,N-dimethylamino)-4,naphthalene sulfonic acid with chloroalkanes such as 1-decylchloride, 1-tetradecyl chloride and 1-hexadecyl chloride. These quaternary ammonium compounds such as 1-(N-decyl-N, N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-dodecyl-N,N-dimethylammonio)-4-naphthalene sulfonate, 1-(N-tetradecyl-N,N-dimethylammonio)-4-naphthalene sulfonate and 1-(N-hexadecyl-N,N-dimethylammonio)-4-naphthalene sulfonate could be separated by means of thin layes chromatography and column chromatography. The surface chemical properties such as surface tension, foaming power, foam stability, wetting efficiency and solubilizing effect for these four compounds were measured. Also critical micelle concentration and hydrophilic-lipophilic balance(HLB) were evaluated. These compounds showed good surface as O/W type emulsifying agent and detergent.

• 한국응용과학기술학회지
• /
• 제3권1호
• /
• pp.57-64
• /
• 1986

1-(carboxyalkyl) trimethyl ammonium chlorides such as 1-(carboxyundecyl) trimethyl ammonium chloride and 1-(carboxytridecyl) trimethyiammonium chloride were synthesized by the reaction of ${\alpha}-bromoalkanoic$ acid with trimethyl amine hydrochloride. In other hand, (carboxymethyl) alkyl dimethyl ammonium chlorides such as (carboxymethyl) dodecyl dimethyl ammonium chloride and (carboxymethyl) tetradecyl dimethyl ammonium chloride were synthesized by the reaction of alkyl dimethylamine with sodium chloroacetate. The four kinds of alky carboxy betaine such as 2-(trimethylammonio) dodecanoate, 2-(trimethyl ammonio) tetradecanoate, (dodecyl dimethylammonio) ethanoate and (tetradecyl dimethyl ammonio) ethanoate were prepared from 1-(carboxyalkyl) trimethyl ammonium chlorides or (carboxymethy1) alkyl dimethyl ammonium chlorides. The surface activities including surface tension, emulsifying power, foaming power, foam stability, deflocculating effect, effectiveness of wettability and solubilizing effect were measured and also critical micelle concentration and hydrophilic-lipophilic. balance(HLB) were evaluated. These carboxy betaines show good surface activities as O/W type emulsifing agent and detergent.

• 한국응용과학기술학회지
• /
• 제6권1호
• /
• pp.51-57
• /
• 1989

A series of four sodium ${\alpha}-sulfo$ fatty vinyl ester oligomers including sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ myristic acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer and sodium ${\alpha}-sulfo$ stearic acid vinyl ester oligomer were examined for surface activities such as surface tension, foaming power, foam stability, emulsifying power, dispersion effect, solubilization of orange OT. The critical micelle concentration(CMC) was also evaluated. Consequently, these sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers were shown to have a good cohesive power and dispersion effect.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.81-82
• /
• 2011

This paper is to compare and analyze WOE created by emulsifying waste oil & WOES added by stimulant with the existing SR in order to solve the problem of strength and reduction in fluidity occurring in time of the use of waste oil to reduce the autogenous shrinkage of high strength mortar. As experimental results, in case of WOE, there almost never happened a drop in fluidity at 1% replacement and compressive strength also showed the strength value similar to Plain. On the other hand, the effect of strength improvement consequent upon the use of stimulant was found to be insufficient. The change of autogenous shrinkage generally showed a better reduction effect in shrinkage comparing to Plain. In case of WOE1, reduction effect in autogenous shrinkage was found to be more excellent than the existing SR. Accordingly, WOE1 is analyzed to be desirable if reduction in autogenous shrinkage, strength & up to the aspect of fluidity are taken into consideration.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.361-372
• /
• 2019

Effect of different alkane based solvents on the stability of emulsion liquid membrane was investigated using normal alkanes (n-hexane, n-heptane, n-octane and n-decane) under various operating parameters of surfactant concentration, emulsification time, internal phase concentration, volume ratio of internal phase to organic phase, volume ratio of emulsion phase to external phase and stirring speed. Results of stability revealed that emulsion liquid membrane containing n-octane as solvent and span-80 (5 % (w/w)) as emulsifying agent presented the highest amount of emulsion stability (the lowest breakage) compared with other solvents; however, operating parameters (surfactant concentration (5% (w/w)), emulsification time (6 min), internal phase concentration (0.05 M), volume ratio of internal phase to organic phase (1/1), volume ratio of emulsion phase to external phase (1/5) and stirring speed (300 rpm)) were also influential on improving the stability (about 0.2% breakage) and on achieving the most stable emulsion. The membrane with the highest stability was employed to extract acridine orange with various concentrations (10, 20 and 40 ppm) from water. The emulsion liquid membrane prepared with n-octane as the best solvent almost removed 99.5% of acridine orange from water. Also, the prepared liquid membrane eliminated completely (100%) other cationic dyes (methylene blue, methyl violet and crystal violet) from water demonstrating the efficacy of prepared emulsion liquid membrane in treatment of dye polluted waters.

• 디지털융복합연구
• /
• 제13권4호
• /
• pp.417-423
• /
• 2015

정제수/Span 80-Tween 80/화장품용 피부 미백제 계에서 PIC 방법을 이용하여 o/w 나노에멀젼을 제조하였다. 제조 온도를 30 oC에서 80 oC로 상승시킴에 따라 제조된 나노에멀젼의 입경은 150 nm에서 40 nm로 감소하여 나노에멀젼을 형성하였다. 혼합 계면활성제의 HLB를 변화함에 따라 13.0~14.0 부근에서 가장 작은 입경을 형성하는 최적 HLB가 존재하였다. 오일/유화제의 비율이 증가하면 에멀젼의 입자 크기가 증가하였다. $f{\leq}0.15$ 조건에서 나노에멀젼의 크기 분포는 2 개월 이상 일정하게 유지 되었다. 제조 온도의 증가는 단 분산 나노에멀젼의 제조를 가능하게 하였다. 나노에멀젼이 생성되면, Ostwald ripening에 대한 안정성은 연속 상에서 화장품용 피부 미백제의 매우 낮은 용해도로 인해 안정하였다.

• 대한화장품학회지
• /
• 제42권1호
• /
• pp.29-35
• /
• 2016

본 연구에서는 미백제인 RS White를 함유한 O/W 나노에멀젼의 형성 가능성을 유화제 종류별로 실험하였다. 친수성계면활성제로 Tween 80, 60, HCO 60 및 40과 친유성 계면활성제로 Span 80을 사용한 시스템에서는 적정한 농도에서 나노에멀젼이 형성되었으나 Myrj 52, Montanov L 및 Tegocare 450과 Span 80을 사용한 시스템에서는 형성되지 않았다. 형성된 나노에멀젼은 입자의 직경이 100 nm 미만의 반투명 외관을 보였으며 시간 경과에 따른 안정성 평가에서도 안정성을 유지하였다. 이들의 경피흡수 정도를 마크로에멀젼과 비교한 결과 24 h 동안 피부 투과량은 나노에멀젼은 $70.84{\mu}g/cm^2$, O/W 마크로에멀젼은 $28.97{\mu}g/cm^2$으로 나타났다. 따라서, 본 연구는 RS White 미백제를 함유한 안정한 나노에멀젼이 기능성 소재의 효율적인 피부 전달체로서 응용 가능성이 있음을 시사한다.

• 생명과학회지
• /
• 제17권7호통권87호
• /
• pp.944-947
• /
• 2007

Bacillus LPO3 (계면활성제와 같이 유화물질을 생산하는)을 hydrocarbon을 감소시키는 bio-control agent로 사용했다. 토양 (시중구입)은 gasoline을 섞어 오염시킨 토양을 사용하였다. 13일 동안 bacteria의 성장, hydrocarbon의 감소, 그리고, Bacillus LP03 의 작물 성장에 미친 요인(식물의 싹과 뿌리의 길이를 포함한)을 관찰하였다. 우리는 이 bacteria의hydrocarbon을 감소 시키는 물질로서 이 균이 생산하는 계면활성제일 것이라는 가능성을 이미 확인 하였으며 이는 식물의 싹과 뿌리의 생장을 촉진하였고, 회색 곰팡이에 대하여항 진균 활성을 보였다. 본 연구에서는 bacteria를 넣지 않은 기름으로 오염된 토양 실험 군에서는 식물이 자라나지 않았을 뿐 아니라 살아남지도 못했다. 실험 결과로 볼 때, gasoline의 hydrocarbon이 시간이 지남에 따라 감소되었고, RNA blotting실험에서는 오염된 토양에서 균의 증식과 더불어 계면활성제관련 유전자 산물의 증가를 확인하였다 결과적으로, 이 bacteria (계면활성제를 생산하는)는 회색 곰팡이에 감염된 토양이나 기름으로 오염된 토양에서 작물이 자랄 수 있게 하기 위한 bio-control agent로서 유효한 균으로 생각된다.