• 한국지반환경공학회 논문집
• /
• 제16권10호
• /
• pp.33-38
• /
• 2015

본 논문에서는 물속에서의 조립입자 침강속도에 대한 특성을 파악하기 위해 다양한 재료 및 입자크기에 대한 실험적 관찰을 수행하고 그 결과들을 재료별로 비교함과 더불어 기존에 발표된 입자침강속도 예측을 위한 경험식들과 상호비교하였다. 본 연구에서는 폴리아세탈, 유리 및 스틸의 세 가지 서로 다른 재료 및 크기로 구성된 구모양의 입자를 이용하였으며, 입자의 직경은 1mm에서 20mm까지 다양한 직경을 고려하였다. 실험결과, 조립입자의 침강속도는 아주 작은 크기(약 $50{\mu}m$ 이하)의 입자에만 적용된다고 알려진 Stokes 식과는 상당한 차이를 나타냈으며, 또한 입자의 크기에 관계없이 침강속도를 예측하는 다른 연구자들의 경험식들과도 입자의 크기 및 재료의 종류(밀도)에 따라 서로 상이한 결과를 나타냈다. 실험에서 관찰된 조립입자의 침강속도는 재료의 종류에 관계없이 입자의 크기가 상대적으로 작을 때는(약 3mm 이하) 기존의 입자 침강속도에 대한 경험식들과 유사하였으나 그 이상에서는 입자의 크기가 증가할수록 기존 경험식들과의 차이도 더 크게 발생하였다. 본 연구를 통해서 조립입자의 침강속도는 입자의 크기 및 재료밀도에 따라 상당한 차이가 발생할 수 있다는 것을 알았으며 기존 경험식들은 실제로 발생하는 조립입자의 침강속도를 잘 예측하지 못해 향후 조립입자의 침강속도를 예측하기 위해 기존 경험식들을 있는 그대로 적용하지는 말아야 하고 실험 등을 통해 검증 및 확인하는 과정이 반드시 필요하다는 것을 파악하였다. 본 연구결과는 향후 물속에서의 조립입자의 침강속도를 이해하는 데 유용한 정보를 제공할 수 있을 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.380-386
• /
• 2002

Damage behaviors induced in silicon carbide by an impact of particle having different material and size were investigated. Especially, the influence of the impact velocity of particle on the cone crack shape developed was mainly discussed. The damage induced by spherical impact was different depending on the material and size of particles. Ring cracks on the surface of specimen were multiplied by increasing the impact velocity of particle. The steel particle impact produced larger ring cracks than that of SiC particle. In the case of high velocity impact of SiC particle, radial cracks were produced due to the inelastic deformation at the impact site. In the case of the larger particle impact, the damage morphology developed was similar to the case of smaller particle one, but a percussion cone was farmed from the back surface of specimen when the impact velocity exceeded a critical value. The zenithal angle of cone cracks developed into SiC material decreased monotonically with increasing of the particle impact velocity. The size and material of particle influenced more or less on the extent of cone crack shape. An empirical equation, $\theta$= $\theta$$\sub$st/, v$\sub$p/(90-$\theta$$\sub$st/)/500 R$\^$0.3/($\rho$$_1$/$\rho$$_2$)$\^$$\frac{1}{2}$/, was obtained as a function of impact velocity of the particle, based on the quasi-static zenithal angle of cone crack. It is expected that the empirical equation will be helpful to the computational simulation of residual strength in ceramic components damaged by the particle impact.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.383-388
• /
• 2001

Effects of particle property variation of cone crack shape according to impact velocity in silicon carbide materials were investigated. The damage induced by spherical impact having different material and size was different according to materials. The size of ring cracks induced on the surface of specimen increased with increase of impact velocity within elastic contact conditions. The impact of steel particle produced larger ring cracks than that of SiC particle. In case of high impact velocity, the impact of SiC particle produced radial cracks by the elastic-plastic deformation at impact regions. Also percussion cone was formed from the back surface of specimen when particle size become large and its impact velocity exceeded a critical value. Increasing impact velocity, zenithal angle of cone cracks in SiC material was linearly decreasing not effect of impact particle size. An empirical equation, $\theta=\theta_{st}-\upsilon_p(180-\theta_{st})(\rho_p/\rho_s)^{1/2}/415$, was obtained from the test data as a function of quasi-static zenithal angle of cone crack($\theta_{st}$), the density of impact particle(${\rho}_p$) and specimen(${\rho}_s$). Applying this equation to the another materials, the variation of zenithal angle of cone crack could be predicted from the particle impact velocity.

• 산업기술연구
• /
• 제20권A호
• /
• pp.269-278
• /
• 2000

The pressure-time profile of the explosion gases can controlled for the use of cartridge explosive with two techniques known as Decoupling and spacing of the charges. Decoupling consists of a space between the explosive column and wall of the blast hole. Four different decoupling index 1.4, 1.8, 2.34, 3.0 are selected in this field study. The level of ground vibrations with each decoupling index was measured and the empirical particle velocity equation from these data was obtained. The condition of new cracks at blast hole are also examined. As the decoupling index is increased, the level of the blast vibration is decreased. But the cracks in rock masses are efficiently formed to remove the broken rock. The vibration constant associated with test sites is given as $K=1564.5(D.L)^{-1.3233}$ in terms of D.I.(decoupling index).

• 한국지반공학회논문집
• /
• 제26권8호
• /
• pp.59-66
• /
• 2010

본 연구에서는 동다짐 공법을 적용할 시 개량심도와 진동영향 예측을 유한요소해석을 통해 그 적용성을 규명하였다. 동다짐 공법이 적용된 기존 현장 조건에 따라 지반을 모델링하였으며, 동적하중 모델은 rigid body force를 적용하였다. 개량심도는 심도별 최대 연직 입자 가속도로 예측을 하여 기존 경험식과 비교 분석하였으며, 진동영향은 진동원으로부터 거리별 연직 최대 입자 속도를 도출하여 기존 경험식에 의한 값과 비교 분석하였다. 수치해석 결과, 개량심도의 경우 기존의 경험식과 비슷한 양상을 띄고 있으며, 진동영향의 경우는 기존 식과 특정 구간에서 차이를 보이고 있으나, 어느 정도 소요이격거리를 예측 할 수 있었다. 이들 해석결과는 경험적인 방법과 더불어 동다짐 설계의 신뢰도 향상을 위한 기초적인 자료가 될 것으로 보인다.

• 화약ㆍ발파
• /
• 제27권1호
• /
• pp.79-87
• /
• 2009

발파진동속도(PVS, PPV, $V_V$)와 진동레벨과의 관계식을 산출하기 위해서 동일한 위치에서 동시에 측정한 진동속도와 진동레벨의 자료를 회귀분석 하였다. 회귀분석결과 발파진동속도와 진동레벨과의 상관관계는 좋았다. 이 연구결과 진동레벨과 진동속도와의 관계식들은 환경진동의 평가 및 관리에 유용하게 적용할 수 있을 것으로 판단된다.

• 한국지반공학회지:지반
• /
• 제6권3호
• /
• pp.5-12
• /
• 1990

In this paper, ground vibration and other properties measurements were conducted to deter mine empirical equation based on careful test blasting with crawler drill(diameter 70-75mm). The empirical euqations for ground vibration are obtained as follows where V is peak particle velocity in cm 1 sec, D is distance in m and W is maximum charge weight per delay in kg

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.773-778
• /
• 2006

Velocity profiles inside a partially filled pipline have been investigated experimentally. To measure the velocity fields, a particle image velocimetry (PIV), which is a recent quantitative visualization technique, is applied. The velocity profile inside a circular pipe is well known, but if the pipe is partially filled, the problem is entirely different in the sense that the velocity distribution is significantly affected by the slope of pipe and filled water level, and so on. In order to calculate exact flow rate in the open channel or partially filled pipeline, three-dimensional velocity distributions at a given cross-sectional area are measured and compared the flow rates with the previously known empirical formula of Manning equation. The results show that the velocity profiles at center plane is considerably different from each other when the slope and water level change. Thus, The three-dimensional velocity profile can be the most plausible estimate for the exact flow rate.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.83-91
• /
• 2011

Even if smoke, fumes, mist or dust particles are removed by electrostatic precipitators (ESPs), the occurrence of ozone, which is harmful to human body, has to be severely restricted in the indoor environments of hospitals, offices, and workshops. Therefore, the two-stage ESP generating positive corona at the ionizer is typically used because it creates less ozone than the two-stage ESP generating negative corona at the ionizer. In order to predict the collection performance and the optimal design of the two-stage ESP applied to positive high-voltage, particle concentration is experimentally investigated in this paper. In addition, particle motion within the collector section is also numerically analyzed. The positive corona discharge current of the ionizer is found to be affected by the applied voltage in the collector section but less so by the particle concentration. Particle concentration shows a minimum near the high voltage electrode of the collector section. The minimum value of the collection efficiency is almost proportional to gas velocity. When the collector length decreases, the minimum value of the collection efficiency increases. Charged particles entering the collector region are linearly deflected towards the grounded plate by an electric field. From the above experimental and numerical results, two empirical equations on the concentration ratio and the collection efficiency are derived, and are in good agreement with the experimental data.

• 화약ㆍ발파
• /
• 제15권3호
• /
• pp.20-32
• /
• 1997

The pressure-time profile of the explosion gases can be controlled fot the use of cartridge explosives with two techniques Known as Decoupling and Spacing the charges. Decoupling consists in leaving and empty space between the explosive column and wall of the blast hole. Four different decoupling index, 1.4, 1.8, 2.34, 3.0 are selected in this field study. The level of ground vibrations with each decoupling index are measured and the empirical particle vibrations with each decoupling index are measured and the empirical particle velocity equation from these data was obtained. The condition of new cracks at blast hole are also examined. As the decoupling index in increased, the level of the blast vibration is decreased,. But the cracks in rock masses are efficiently formed to remove the broken rock. The vibration constant associated with a given site $K=1564.5(D.I)^{-1.3233}$ in terms of D.I(decopling index).