• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.23-36
• /
• 1992

The flat dilatometer(DMT) has been practically used as an in-situ test equipment. It is a simple, rapid and cost-effective tool to characterize the in-situ stress-strain-strength properties of various types of ground materials. However, the results of flat DMT should be validated with considerable data with respect to the known reference values for a specific site. In this study, the applicability of existing relationships which were established for other local deposits is verified by performing the tests in several clay deposits. To compare with the DMT results, field vane tests and cone penetration tests were also carried out in the same field as reference tests, and unconsolidated undrained tests, oedometer tests, and other fundamental material properties tests were conducted on the thin-walled tube samples in the laboratory. The results of the flat DMT combined with empirical correlations are used to estimate soil types, unit weights, coefficients of lateral earth pressure at rest, overconsolidation ratios, constrained moduli and undrained shear strengths of three clay local deposits. It was found that various geotechnical properties estimated from the flat DMT generally well agree with those from the reference tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.107-113
• /
• 2005

A calorimeter of 2-ton thrust level rocket engine chamber has been developed to measure the wall heat flux. The liner of the chamber is made of copper-chromium alloy to maximize the heat transfer performance and structural strength. 1-D design code based on empirical correlations has been used for the prediction of the global thermal characteristics while 3-D CFD has been applied for the verification of local cooling performance. The predicted average wall heat flux at the throat is 43 $MW/m^{2}$ for the combustion chamber pressure of 53 bar. The chamber structure is confirmed to be safe at the pressure of 150 bar through 2-D stress analysis and measurement of the strain of the test species. Finally, the test of pressurizing the calorimeter chamber has been performed with water at the pressure of 150 bar in room temperature environment. No thermal damage has been detected after the hot-fire test in the test nozzle of same cooling performance with the developed calorimeter though the measured throat heat flux is higher than the design value by 10%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.140-141
• /
• 2017

Big data analysis, in the large amount of data stored as the data warehouse which it refers the process of discovering meaningful new correlations, patterns, trends and creating new values. Thus, Big data analysis is an effective analysis of various big data that exist all over the world such as social big data, machine to machine (M2M) sensor data, and corporate customer relationship management data. In the big data era, it has become more important to effectively analyze not only structured data that is well organized in the database, but also unstructured big data such as the internet, social network services, and explosively generated web documents, e-mails, and social data in mobile environments. By the way, a meta analysis refers to a statistical literature synthesis method from the quantitative results of many known empirical studies. We reviewed a total of 750 samples among 50 studies published on the topic related as IDT between 2000 and 2017 in Korea.

• The Korean Journal of Applied Statistics
• /
• v.28 no.5
• /
• pp.1013-1024
• /
• 2015

We compare the performance of two representative estimation methods for the dynamic conditional correlation (DCC) GARCH model. The first method is the pairwise estimation which exploits partial information from the paired series, irrespective to the time series dimension. The second is the multi-dimensional estimation that uses full information of the time series. As a simulation for the comparison, we generate a multivariate time series similar to those observed in real markets and construct a DCC GARCH model. As an empirical example, we constitute various portfolios using real KOSPI 200 sector indices and estimate volatility and VaR of the portfolios. Through the estimated dynamic correlations from the simulation and the estimated volatility and value at risk (VaR) of the portfolios, we evaluate the performance of the estimations. We observe that the multi-dimensional estimation tends to be superior to pairwise estimation; in addition, relatively-uncorrelated series can improve the performance of the multi-dimensional estimation.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.29-37
• /
• 2009

As the level of the ambient air quality becomes increasingly important, transportation management strategies tend to incorporate air quality standards into their measure of effectiveness. However, previous research efforts did not pay much attention to the empirical relationships between traffic volume and air quality, potentially due to the lack of data. With this background, this study investigates the relationship using Seoul's existing traffic and air quality monitoring data collected over the period of three years, from 2005 through 2007. In particular, those paired monitoring sites with a distance of less than one kilometer apart were utilized, targeting the emissions of CO, NO, $NO_2$, and $PM_{10}$. As a result, in general the data of two monitoring systems exhibited lower correlations, $NO_2$ showing a relatively higher correlation with traffic volumes than other emissions. In addition, it was found that the degree of correlation can be higher for the data obtained over the morning time period, 6am-9am, and the day after rainy days.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.481-494
• /
• 2015

The objective of this study is to verify the correlations among design quality of domestic internet fashion shopping mall and relations to specific shopping malls, and shopping mall users' intention to continue the relations. The main results were withdrawn as follows. First, it was found that some factors of internet fashion shopping mall design quality had significant positive influences on the qualities of relationship to users such as reliability, satisfaction and devotion. Second, it was found that all components of quality of customer relationship to internet fashion shopping mall such as reliability, satisfaction and devotion had significant positive influence on their intention to continue relations to the internet shopping mall. Third, graphic and multimedia quality of internet fashion shopping mall design components had significant positive influences on internet fashion shopping mall users' intention to continue relationship to the shopping mall. Empirical study of qualities on the relationship between internet fashion shopping mall design quality and its users, their intention to repurchase or recommend goods from the mall would be very valuable in a management point of view of small internet fashion shopping mall.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.12 no.3
• /
• pp.158-167
• /
• 2004

Condensation heat transfer experiments were conducted with a oblong shell and plate heat exchanger without oil in a refrigerant loop using R-134a. An experimental refrigerant loop has been developed to measure the condensation heat transfer coefficient $h_r$ and frictional pressure drop ${\Delta}p_f$ of R-134a in a vertical oblong shell and plate heat exchanger. Four vertical counter flow channels were formed in the oblong shell and plate heat exchanger by four plates having a corrugated sinusoid shape of a $45^{\circ}$ chevron angle. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the condensation heat transfer coefficients and pressure drops increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the $h_r\;and\;{\Delta}p_f$. Also, a rise in the average heat flux causes an increase in the $h_r$. But the effect of the average heat flux does not show significant effect on the ${\Delta}p_f$. On the other hand, at a higher saturation temperature, both the $h_r\;and\;{\Delta}p_f$. found to be lower. Based on the present data, the empirical correlations are provided in terms of the Nusselt number and friction factor.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.446-454
• /
• 2021

Critical heat flux (CHF) has traditionally been evaluated using look-up tables or empirical correlations for nuclear power plants. However, under complex moving condition, it is necessary to reconsider the CHF characteristics since the conventional CHF prediction methods would no longer be applicable. In this paper, the additional forces caused by motions have been added to the annular film dryout (AFD) mechanistic model to investigate the effect of moving condition on CHF. Moreover, a theoretical model of the natural circulation loop with additional forces is established to reflect the natural circulation characteristics of the loop system. By coupling the system loop with the AFD mechanistic model, a CHF prediction program called NACOM for natural circulation loop under moving condition is developed. The effects of three operating conditions, namely stationary, inclination and rolling, on the CHF of the loop are then analyzed. It can be clearly seen that the moving condition has an adverse effect on the CHF in the natural circulation system. For the calculation parameters in this paper, the CHF can be reduced by 25% compared with the static value, which indicates that it is important to consider the effects of moving condition to retain adequate safety margin in subsequent thermal-hydraulic designs.

• Journal of People, Plants, and Environment
• /
• v.21 no.6
• /
• pp.461-471
• /
• 2018

The role of urban agriculture should not be limited as a small-scale crop cultivation activity as it was, but it has to be considered as an entire process of a agriculture activity for the restoration of the city community. This study is based on the assumption that there has been a significant change in urban lifestyle and urban farming preference, considering the overall improvement in standard of living after implementation of five day work week system. It was conducted for urban citizens who were interested in actual urban agriculture for ages 19 and over who visited the Korea Urban Agriculture Exhibition in 2018. Only 115 valid samples were used for the empirical analysis. To analyze the demographic characteristics and effects of urban agriculture, frequency analysis and descriptive statistics were conducted. In order to analyze the reliability and validity of the measurement variables of the effect, the variables that deteriorate the validity were removed and 15 variables of the urban agricultural effect were selected. According to the result of factor analysis, three factors were extracted as follows: socially sustainable effect, negative effect and economically sustainable effect. In order to examine the effects of urban agriculture depending on income level, the one-way ANOVA, which is a statistical technique for verifying differences in the sample means, was performed. The psychological stability of people, the recovery of humanity through communion with nature, and the vitalization of agriculture linked with local agriculture had significant correlations with income level. The negative effect showed no significant correlation with income level. The improvement of the local environment was found to have an impact in relation with income level. We expect that there will be more studies on policies for the new types and models of urban agriculture in order to make it easier for urban citizens to approach it.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.987-995
• /
• 2019

Steam jet condensation is of great importance to pressure suppression containment and automatic depressurization system in nuclear power plant. In this paper, the condensation processes of sonic steam jet in a quiescent subcooled pool are recorded and analyzed, more precise understanding are got in direct contact condensation. Experiments are conducted at atmospheric pressure, and the steam is injected into the subcooled water pool through a vertical nozzle with the inner diameter of 10 mm, water temperature in the range of $25-60^{\circ}C$ and mass velocity in the range of $320-1080kg/m^2s$. Richardson number is calculated based on the conservation of momentum for single water jet and its values are in the range of 0.16-2.67. There is no thermal stratification observed in the water pool. Four condensation regimes are observed, including condensation oscillation, contraction, expansion-contraction and double expansion-contraction shapes. A condensation regime map is present based on steam mass velocity and water temperature. The dimensionless steam plume length increase with the increase of steam mass velocity and water temperature, and its values are in the range of 1.4-9.0. Condensation heat transfer coefficient decreases with the increase of steam mass velocity and water temperature, and its values are in the range of $1.44-3.65MW/m^2^{\circ}C$. New more accurate semi-empirical correlations for prediction of the dimensionless steam plume length and condensation heat transfer coefficient are proposed respectively. The discrepancy of predicted plume length is within ${\pm}10%$ for present experimental results and ${\pm}25%$ for previous researchers. The discrepancy of predicted condensation heat transfer coefficient is with ${\pm}12%$.