• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.110-124
• /
• 2007

In this study, the control efficiency of odorous compounds was measured from diverse control process units of 14 individual companies located within the Ban-Wall industrial complex of Ansan city, Korea (January to July 2005), To quantify the control efficiency levels of major odorous compounds, we collected odor samples from both the front and rear side of 17 control process units ($N=17{\times}2=34$). If the control efficiency is compared for each of 32 compounds between different process units, wet scrubber (WS) was found to be the most effective unit in terms of the sum of pollutants showing the positive control signals. Although the WS system shows generally a good control pattern for VOC, it is not the case for most index odorous pollutants; only 3 out of 12 index compounds were found to show positive control efficiencies. The results of the study also indicated that the control efficiency differ greatly between different industrial sectors and/or control process types. In the case of leather industry, carbonyl compounds were found to exhibit the highest control efficiency with its values varying from 19 to 90%. On the other hand, in the case of metal production sector, VOC recorded the maximum control efficiency with values varying from 18 to 79%. According to this study, most air pollution control facilities operated in most companies show fairly poor control efficiencies for most malodor compounds. Hence, to obtain best control efficiency of odorous pollutant emission, acquisition of better information on source characteristics and establishment of effective control technologies are highly demanding.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.49-57
• /
• 2012

The reduction of greenhouse gas emission currently becomes more urgent task for Korean Industries, especially for the paper industries because of the new regulation based on the low carbon-green growth law. In order to reduce effectively the greenhouse gas emission, the development of greenhouse gas emission inventory has been widely considered as one of the basic processes and has been applied to many industries. In this study, the fundamental schemes and the cases of greenhouse gas inventories were investigated. Especially, the major considering units for paper industries were suggested to develope greenhouse emission inventory of paper industry.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.67-77
• /
• 2002

Air traffic increased 12% annually in Korea since 1988 after the Olympics, this rate is two times than the rate of the world average. In order to accommodate fast growing aviation demand, Incheon International Airport is operated at Yongjong Island since March, 2001. The Incheon airport project will continue till 2020. After the final phase in 2020, Incheon International Airport will handle 100 million passengers, 530,000 flights and 7 million tons of cargo annually. In this study, air pollution from aircraft and other sources are calculated and assessed in Incheon International Airport area by EDMS(Emission and Dispersion Modeling System), which is a combined emission and dispersion model for airport. EDMS could also be considered power plant, incinerator and aircraft support equipment such as ground support equipment, aerospace ground equipment, auxiliary power units. And EDMS is recommended as preferred model for air quality assessment of the airport area by U.S. EP A. The result of this study shows that NOx emission from aircraft and support utility is estimated as 27,000 - 35,000 ton/yr and Namdong-Gu area in Incheon city is affected as 30-60 ppb by the NOx emission from these sources in 2020, the final phase of Incheon international airport construction.

• Journal of Energy Engineering
• /
• v.6 no.2
• /
• pp.129-136
• /
• 1997

This paper presents a new economic load dispatch considering atmospheric emissions such as NOx and SO$_2$caused by the operation of fossil-fueled thermal generation in power systems. The proposed method is described for scheduling their output of thermal power units so as to comply with total emission constraint, area emission constraint and the both of those constraints. Also, by using a trade-off curve, representing all dispatch alternatives and conflict between the emission and the fuel cost, the sensitivity analysis of the emission and the fuel cost is applied to this algorithm. By the way, this proposed method is analyzed how dispatch changes as a function of the total environmental cost, and as a function of the relative weighting of individual environmental insults, e.g, NOx and SO$_2$. By applying the proposed method to the system, the usefulness of this method is verified.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.439-445
• /
• 2008

In this paper, the preliminary EMC analysis process between the Communication, Ocean and Meteorological Satellite (COMS) and Geostationary Earth Orbit (GEO) launch vehicles in the frequency range [1MHz-47MHz] is described. The considered launch vehicles are arian V, sea Launch, land Launch, atlas III&V, delta IV, proton M/breeze M, soyuz, HII-A and Angara. The launch vehicle Radiated Emission (RE) specifications have been compared to COMS satellite Radiated Susceptibility (RS) limits. The COMS RS limits are the RS qualification levels of COMS units during launch. As a result, The radiated emission levels of arian V, sea launch, atlas III&V, delta IV, proton M/breeze M, HII-A and angara are compliant with COMS RS limits. The negative margins appear between land launch or soyuz launch vehicle RE and COMS RS. Then, if the land launch or soyuz is chosen by the customer, The tests should be performed at satellite level in order to demonstrate the compatibility with respect to launch vehicles specifications.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.232-232
• /
• 2006

Intramolecular energy transfer in heteroleptic red phosphorescent dopant materials with mixed ligand units in one molecule was studied. 1-phenylisoquinoline(piq) and phenylpyridine(ppy) moieties were introduced as ligands for Ir based phosphorescent dopants and light emission mechanism was investigated. Intramolecular energy transfer from ppy ligand to piq ligand resulted in pure red emission without any green emission from ppy. Current efficiency of red devices was improved from 4 cd/A to 4.8 cd/A by using mixed ligand structures and deposition temperature of red dopant could be lowered by introducing ppy ligand.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.181-193
• /
• 1996

A blue light emitting device has been successfully fabricated using a polymer with regulated conjugation length containing trimethylsilyl substituted phenylenevinylene units. Electroluminescence from the device has an emission maximum at 470 nm. The device shows typical diode characteristics with operating voltage of 20 V and the light becomes visible at a current density of less than $0.5;mA/cm^2$. The electroluminescence spectrum is virtually identical with the photoluminescence spectrum, indicating that the radiation mechanisms are the same for both. A light emitting device using the blend of a large band gap polymer and a small band gap polymer was also fabricated. Light emission from the small band gap polymer shows much improved quantum efficiency, but there is no light emission from the large band gap polymer. Quantum efficiency of the blend increases up to about two orders of magnitude greater than that of the small band gap polymer with increasing proportion of the large band gap polymer. The improvement in quantum efficiency is interpreted in terms of exciton transfer and the hole blocking behaviour of the large band gap polymer. Finally, we have fabricated a patterned flexible light emitting device using the high quantum efficiency polymer blend system.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.297-311
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted during the process in order to select carbon basic units for agricultural production system compliant in domestic situation instead of relying on overseas data and apply life cycle assessment of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.0088kg-$CO_2$ for charcoal, 0.1319kg-$CO_2$ for grass liquid, and 0.2804kg-$CO_2$ for microbial agent.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.465-465
• /
• 2008

Conjugated polymers have attracted much scientific and technological research interest during the past few decades because of their potential use such as polymer light-emitting diodes (PLEDs).1,2 Particularly, lots of phenylene-based polymers such as polyfluorene and its derivatives have been synthesized because of their high photoluminescence quantum efficiencies and thermal stabilities. However, troublesome long wavelength emission in polymer film of polyfluorenes on heating during device formation or operation has been the crucial problem for practical applications. The source of the long wavelength emission was initially believed to be solely due to excimer emission as a result of polymer aggregation. It has also recently been correlated with emissions from ketonic defects in the fluorene units. Many efforts have been made to reduce the tendency to red-shifted emission. Here, we report for the first time the design and synthesis of novel 9,9-spiro bifluornene-based polymers containing heteroatoms such as N, S in its molecular skeleton. Especially, the 9,9-spiro bifluornene-based polymers containing N atom showed stable blue electroluminescence, which did not show spectral change upon thermal annealing.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.272-279
• /
• 2012

The emission quota of 26.9% was allocated to the architectural sector according to the greenhouse gas(GHG) emission reduction goal of the government. It has become inevitable to change the architectural structures in a low-energy consumption and sustainable manner for new and existing house. The introduction of various legal systems and deregulation have been attempted to promote the low carbon emission and sustainable energy conversion. Although overall emission reduction goal has been set for 6.7 million units of existing houses, there has been a lack of standards and directions for the emission reduction measures. This study was intended to present the most economic and effective green technology improvement measures based on the investigation into the current conditions through direct visit to the selected architectural structures and the repeated simulation of relevant technical elements.