• 대한교통학회지
• /
• 제29권4호
• /
• pp.85-93
• /
• 2011

교통부문의 지속가능성(sustainability)을 유지하기 위하여 대중교통중심의 도시개발(transit oriented development, TOD), 자전거나 보행 등 녹색 교통수단의 이용활성화, 그리고 차량운행시 배출되는 온실가스(green house gas) 를 감축하는 정책 등 다양한 방안들이 제시되고 있다. 이중 온실가스 배출량에 대한 다양한 연구들이 제시되고 있으나, 교통측면의 행태적인 분석에는 한계를 가지고 있다. 본 연구는 교통측면에서 좀 더 행태적인 측면을 고려한 온실가스 배출량 추정식을 제시하는 것이 연구의 목적이다. 즉, 특정 존에서 발생하는 차량으로 인한 온실가스 배출량을 기종점간 통행수요(travel demand for each OD pair)와 통행거리(travel distance)를 반영하여 결정한다. 여기서 기종점간 통행수요는 통행비용의 함수로 중력모형(gravity model)을 이용하여 구해지며, 통행거리는 평균 통행거리가 아닌 기종점간 실제 통행거리를 고려한다는 점이 기존 연구와 차이가 된다. 또한, 본 연구에서 제시하는 온실가스 추정식의 적용성과 활용성을 검토하기 위하여 통행비용에 대한 온실가스 배출량의 민감도(sensitivity)와 탄력성(elasticity)을 유도하며, 정책적 측면에서 온실가스를 감축하기 위한 온실가스 통행료(green house gas pricing)의 부과 효과에 대해서도 검토해 본다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.404-407
• /
• 2018

1장 - 자동차는 엔진에서 만든 동력을 바퀴에 전달하여 지상에서 승객이나 화물을 운반하는 교통 수단이다. 과거에 내연기관에서에서 출발한 자동차는 최근에는 전기자동차와 혼합된 하이브리드와 순수 전기자동차 등이 출시되고 있다. 이로 인한 다양한 부품으로 인한 기술의 발전 및 안정성 강화 등으로 첨단 전기 전자제품의 배치는 증가할 수 밖에 없었고 그로 인해 전자파 환경은 더욱 복잡하고 다양할 수 밖에 없다. CISPR 25에서는 전자기파 노이즈에 대한 시험 방법에 대해서 연구를 진행 중에 있다. 그 중 복사방출 시험에서 요구된 GND 조건에 따른 노이즈 패턴을 분석 하기 위해 다양한 조건을 적용해 비교 검증하고자 한다. 2장 - EMI 챔버의 일반적인 특성 기술, 시험 법 및 측정 장비에 대해 기술한다. 3장 - RE 시험 : 시료가 Center에 있을 때 Ground Strap 변화에 따른 노이즈 분석, 시료가 Center가 아닌 다른 곳에 있을 때 Ground Strap 변화에 따른 노이즈 분석 검증 하고자 한다.

• 환경정책연구
• /
• 제6권4호
• /
• pp.55-81
• /
• 2007

CGE모형을 이용하여 우리나라를 포함한 OECD 국가와 중국, 브라질 등 18개 국가를 대상으로 다양한 비율의 $CO_2$ 저감량이 할당되는 경우 그에 따라 예상되는 국가별 GDP손실액을 추정하고 그 결과를 이용하여 각국의 $CO_2$ 저감에 따른 총비용곡선, 한계비용곡선, 평균비용곡선의 형태를 비교하였다. 대다수 국가의 총비용곡선, 한계비용곡선 그리고 평균비용곡선은 우상 향하는 형태를 나타내었으나 국가별로 실행가능한 저감영역이 다르고 또 각 함수의 기울기와 절편 등이 다르게 나타났다. 향후 post-kyoto 온실가스감축 의무부담방안 협상 시 온실가스 저감에 따른 각국의 GDP손실액 유형을 고려하여 우리나라와 비슷한 패턴을 가지고 있는 국가들과 공동으로 의무부담방안을 모색하는 것이 필요하다.

• 한국항공우주학회지
• /
• 제43권8호
• /
• pp.677-683
• /
• 2015

하이브리드 로켓은 특정한 연소조건에서 10~30Hz 저주파수 연소불안정이 나타난다. 후연소실의 와류 흘림 현상이 저주파수 불안정 발생과 직접적인 관련이 있는 것으로 판단되며, 이를 확인하기 위하여 발광하는 연소가스의 후연소실 내부유동을 직접 촬영하여 광도 분석과 유동 가시화를 시도하였다. 저주파수 연소불안정이 발생하면 일정한 주기(~18Hz)를 갖는 광도 변화가 나타났으며, 압력교란(p')의 위상(phase)이 거의 일치하고 있어 비-음향 불안정임에도 불구하고 압력과 연소교란이 상호 간섭하고 있음을 확인하였다. POD에 의한 유동 모드 분석결과 안정한 연소가 발생하면 후연소실 유동은 공간적으로 상하 대칭 모드 형태를 이루지만 불안정 연소에서는 수직방향 경사각을 이루는 대칭축을 중심으로 변화하는 유동모드가 나타난다. 특히 3번 모드는 불안정 연소가 발생하는 경우에만 나타나는 유동 모드이다. 불안정 연소가 발생하는 경우에 수직선을 대칭으로 변하는 모드가 나타나는 것은 저주파수 연소불안정이 발생할 때 와류 흘림인 것으로 판단할 수 있다.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.104-108
• /
• 2008

Recently, studies conducted by our research group, revealed the possibility for reducing BSFC, NOx and PM emissions to meet the Euro 4 & 5 legislations. The main objective of the present study is to get better fuel economy in commercial vehicles by considering real driving conditions. Firstly, in order to improve fuel economy on fields, specifically it is required to analyze the driving pattern and make the representative modes from real field data. Secondly, it is performed to make the engine dynometer test to optimize the fuel consumption by reflecting on the representative driving modes, based on the Korea 2008 emission legislation equal to the Euro 4. The engine components such as engine calibration, combustion chamber, turbocharger and ancilliaries were modified to optimize vehicle fuel economy over a typical customer drive cycle whilst still meeting the exhaust emission restrictions. Finally, these results were confirmed by field testing of vehicle equipped with the updated calibration engine. It was placed the two vehicles together traveling the same route and accomplishing the same amount of stops(back to back), in order to evaluate the fuel consumption in comparison to the current vehicle. Through several repeats such as the engine calibration and field test, we could get 3 % to 7.7 % vehicle fuel economy improvements compared to previous vehicle.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.235-240
• /
• 2008

The environment has played a key role to improve the living condition and develop the industry. In building industries, we should consider the environment and mitigate the environmental affect. For mitigating the its affect, various areas of building technology have been developed and applied into filed work. In addition, the process in applying into field requires to conduct the assessment of the environmental affect and improve its applied technology. A lot of assessment methods are proposed in evaluate the building condition such as post-occupancy evaluation, life cycle management and life cycle assessment. Among these assessment methods, life cycle assessment is effectively utilized the environmental affect in building life cycle. Therefore, this paper aimed at analyzing the energy consumption and $CO_2$ emission in building life cycle, using the life cycle assessment and application of the example in apartment housing. This study shows that the maintenance and the production of building materials stage shares most of the amount of energy consumption and $CO_2$ emission and therefore plays an important role to planning the building in terms of the life cycle. Second, the other stages brings about a very small amount. It is important to decide the building shape and contents to mitigate the environmental affect in terms of material, volume, the pattern of the energy use and others.

• 한국농공학회논문집
• /
• 제54권3호
• /
• pp.37-45
• /
• 2012

Recently, the livestock industry in Korea was heavily affected by the outbreak of official livestock diseases such as foot and mouse disease, high pathogenic avian influenza, swine influenza, and so on. It has been established that these diseases are being spread through direct contact, droplet and airborne transmission. Among these transmissions, airborne transmission is very complex in conducting field investigation due to the invisibility of the pathogens and unstable weather conditions. In this study, the airborne transmission was thoroughly investigated inside a pig house by conducting tracer gas ($CO_2$) experiment because experiment with real pathogen is limited and dangerous. This is possible as it can be assumed that the flow is similar pattern very fine particles and gas. In the experiment, the ventilation structure as well as the location of gas emission were varied. The $CO_2$ detection sensors were installed at 0.5 and 1.3 m height from the floor surface. The tracer gas level was measured every second. Results revealed that the direction of spread can be determined by the response time. Response time refers to the time to reach 150 ppm from the gas emission source at each measuring points. The location of the main flow as well as the gas emission was also found to be very important factor causing the spread.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.281.2-281.2
• /
• 2013

Since heavy metal ions included in water or food resources have critical effects on human health, highly sensitive, rapid and selective analysis for heavy metal detection has been extensively explored by means of electrochemical, optical and colorimetric methods. For example, quantum dots (QDs), such as semiconductor QDs, have received enormous attention due to extraordinary optical properties including high fluorescence intensity and its narrow emission peaks, and have been utilized for heavy metal ion detection. However, the semiconductor QDs have a drawback of serious toxicity derived from cadmium, lead and other lethal elements, thereby limiting its application in the environmental screening system. On the other hand, Graphene oxide (GO) has proven its superlative properties of biocompatibility, unique photoluminescence (PL), good quenching efficiency and facile surface modification. Recently, the size of GO was controlled to a few nanometers, enhancing its optical properties to be applied for biological or chemical sensors. Interestingly, the presence of various oxygenous functional groups of GO contributes to opening the band gap of graphene, resulting in a unique PL emission pattern, and the control of the sp2 domain in the sp3 matrix of GO can tune the PL intensity as well as the PL emission wavelength. Herein, we reported a photoluminescent GO array on which heavy metal ion-specific DNA aptamers were immobilized, and sensitive and multiplex heavy metal ion detection was performed utilizing fluorescence resonance energy transfer (FRET) between the photoluminescent monolayered GO and the captured metal ion.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.116-120
• /
• 2019

We prepared $Y_3Al_5O_{12};Ce^{3+},Pr3^{+}$ transparent ceramic phosphor using a solid state reaction method. By XRD pattern analysis and SEM measurement, our phosphors reveal an Ia-3d(230) space group of cubic structure, and the transparent ceramic phosphor has a polycrystal state with some internal cracks and pores. In the Raman scattering measurement with an increasing temperature, lattice vibrations of the transparent ceramic phosphor decrease due to its more perfect crystal structure and symmetry. Thus, low phonon generation is possible at high temperature. Optical properties of the transparent ceramic phosphor have broader excitation spectra due to a large internal reflection. There is a wide emission band from the green to yellow region, and the red color emission between 610 nm and 640 nm is also observed. The red-yellow phosphor optical characteristics enable a high Color Rendering Index (CRI) in combination with blue emitting LED or LD. Due to its good thermal properties of low phonon generation at high temperature and a wide emission range for high CRI characteristics, the transparent ceramic phosphor is shown to be a good candidate for high power solid state white lighting.

• Investigative Magnetic Resonance Imaging
• /
• 제23권2호
• /
• pp.100-113
• /
• 2019

Sarcoidosis is a multisystem disease characterized by noncaseating granulomas. Cardiac involvement is known to have poor prognosis because it can manifest as a serious condition such as the conduction abnormality, heart failure, ventricular arrhythmia, or sudden cardiac death. Although early diagnosis and early treatment is critical to improve patient prognosis, the diagnosis of CS is challenging in most cases. Diagnosis usually relies on endomyocardial biopsy (EMB), but its diagnostic yield is low due to the incidence of patchy myocardial involvement. Guidelines for the diagnosis of CS recommend a combination of clinical, electrocardiographic, and imaging findings from various modalities, if EMB cannot confirm the diagnosis. Especially, the role of advanced imaging such as cardiac magnetic resonance (CMR) imaging and positron emission tomography (PET), has shown to be important not only for the diagnosis, but also for monitoring treatment response and prognostication. CMR can evaluate cardiac function and fibrotic scar with good specificity. Late gadolinium enhancement (LGE) in CMR shows a distinctive enhancement pattern for each disease, which may be useful for differential diagnosis of CS from other similar diseases. Effectively, T1 or T2 mapping techniques can be also used for early recognition of CS. In the meantime, PET can detect and quantify metabolic activity and can be used to monitor treatment response. Recently, the use of a hybrid CMR-PET has introduced to allow identify patients with active CS with excellent co-localization and better diagnostic accuracy than CMR or PET alone. However, CS may show various findings with a wide spectrum, therefore, radiologists should consider the possible differential diagnosis of CS including myocarditis, dilated cardiomyopathy (DCM), hypertrophic cardiomyopathy, amyloidosis, and arrhythmogenic right ventricular cardiomyopathy. Radiologists should recognize the differences in various diseases that show the characteristics of mimicking CS, and try to get an accurate diagnosis of CS.