• 제목/요약/키워드: emission estimation

검색결과 613건 처리시간 0.028초

천연가스 사용 난방 및 산업보일러의 NOx와 CO 배출계수 산정 연구 (A Study on Estimation of NOx and CO Emission Factor from Industrial and Commercial LNG Boilers)

  • 장영기;최상진;김관;송기봉;김호정;정봉진
    • 한국대기환경학회지
    • /
    • 제20권5호
    • /
    • pp.615-623
    • /
    • 2004
  • This study was conducted for developing the emission factors of nitrogen oxide(NOx) and carbon monoxide (CO) from the combustion boilers burning liquefied natural gas (LNG). These emission factors were compared with those of U.S. EPA and European Environment Agency (EEA). NOx and CO concentration in the flow gas were measured using Kane-May, KM9106 and Thermo Environmental Instruments Inc., 42C-HL. Measurement were conducted at thirty industrial and commercial LNG boilers. Emission factors were calculated on the basis of fuel consumption (kg-pollutant/㎥-fuel burned). NOx concentration at industrial boiler was 14~125 ppm and it was measured as 35~125 ppm at commercial boiler. NOx emission factors of industrial boiler and commercial boiler were 1.84kg/$m^3$ and 2.09kg/$m^3$, respectively. NOx emission factor of commercial boiler was higher than that of industrial boiler. The NOx emission factors estimated in this study were lower than those of U.S. EPA and higher than those of EEA. Average CO emission factor of industrial boiler was 0.65 kg/$m^3$ and at commercial boiler it was 0.70kg/$m^3$, CO emission factor at industrial boiler was lower than that at commercial boiler.

제주지역 BVOCs의 배출량 산정에 관한 연구(2): 배출량 특성 및 실태 (A Study on the Estimation of BVOCs Emission in Jeju Island (2): Emission Characteristic and Situation)

  • 이기호;김형철;허철구
    • 한국환경과학회지
    • /
    • 제24권2호
    • /
    • pp.207-219
    • /
    • 2015
  • The purpose of this study is to show the geographical distribution and the temporal variation of the emission amount of biogenic volatile organic compounds(BVOCs) emanated from forests at Jeju Island. The total emission amount of BVOCs calculated by using the CORINAIR Methodology is $3612ton\;yr^{-1}$ at Jeju Island. More than half of BVOCs emissions is come from coniferous forest, and 45 per cent from broad leaved forest. The others is attributed to grassland. Of total emission of BVOCs, isoprene accounts for 28 per cent, monoterpene for 32 per cent, and other VOCs for about 40 percent, respectively. It can be shown that $3000{\sim}10000kg\;yr^{-1}$ of BVOCs is emitted at the zone with dense forest from an altitude of 500 m to the top of Mt. Halla, and less than $1500kg\;yr^{-1}$ at the zone an altitude of below 500 meters. The monoterpene emission is more than $1500kg\;yr^{-1}$ due to the existence of a colony of Abies koreana at the place with more than 1500 meters and a community of Pinus thunbergii and Cryptomeria japonica at the elevation of 500~700 m. In the case of isoprene emission, there is $1500{\sim}3000kg\;yr^{-1}$ at the zone of an elevation from 700 m to 1500 m due to dense broad leaved forest and very little of its emission at an elevation of more than 1500 meters because there is hardly broad leaved trees grown. In this study, emission of BVOCs according to the altitude above sea level is estimated under the situation of lack of the data for broad leaved tree. More detailed data and information for the distribution of broad leaved trees are needed in order to calculate more realistic BVOC emission.

시멘트 산업부문 온실가스(CO2) 배출계수 산정 연구 (A Study on the Estimation of Emission Factors for Greenhouse Gas (CO2) in Cement Industry)

  • 송형도;홍지형;엄윤성;이수빈;김대곤;김정수
    • 한국대기환경학회지
    • /
    • 제23권2호
    • /
    • pp.158-168
    • /
    • 2007
  • The cement industry is one of the energy intensive industries such as petrochemical and steel industry. The energy efficiency of cement industry is high comparing to oversea's cement industries due to the enforcement of energy conservation policies. The purpose of this study is estimate emission factors for greenhouse gas ($CO_{2}$) in cement industry. The results of field study, quicklime contained quantity of five factories were $0.64{\sim}0.65$. Measurement emission (15,382 ton/day) is 40% higher than process emission (8,929 ton/day) on the IPCC Guidelines (1996). Add to combustion emission on the lines of IPCC Guidelines (1996) is similar to the emission of this study. The emission factor of greenhouse gas ($CO_{2}$) were as follows the emission factor between $9.01E-01{\sim}2.15E-01\;ton/ton$ for $CO_{2}$. The result of this study is higher than emission factor of IPCC (0.51) but it is similar to U.S. EPA's (0.952).

PEMS를 이용한 소형 경유차의 실주행 NOx 배출특성 평가 (Estimation of Real-Driving NOx Emission Characteristics from Light-Duty Diesel Vehicles with PEMS)

  • 박연재;권상일;박준홍;이재영
    • 한국대기환경학회지
    • /
    • 제31권6호
    • /
    • pp.562-572
    • /
    • 2015
  • $NO_x$ emissions from diesel vehicles have been regarded as a main cause of high $NO_2$ concentration in metropolitan area. Recent studies have shown that the on-road $NO_x$ emissions of diesel vehicles are quite higher than the emission limits specified with the pre-defined test method for emission certification. To reduce air pollutants effectively, the discrepancy of emissions in certification and real-driving conditions should be tackled. In this study, the real-driving emissions have been estimated with portable emission measurement system (PEMS). The results of this study have shown that the on-road $NO_x$ emissions from diesel vehicles have been decreased as the introduction of stricter emission regulation, EURO-6, but additional reduction should be still required and robust technologies should be applied to control $NO_x$ in real-driving conditions. RDE-LDV (Real Driving Emission - Light Duty Vehicles) test method being developed in the European Union can represent excessive on-road $NO_x$ emissions of diesel vehicles as applied emission technologies and can be a solution to remove discrepant $NO_x$ emissions between certification and Korean real-driving conditions. Among the $NO_x$ reduction technologies for EURO-6 diesel vehicles, selective catalytic reduction (SCR) system has shown the better performance than lean $NO_x$ trap (LNT) system to control on-road $NO_x$ emissions. Implementing RDE-LDV will require vehicle manufacturers to adopt the more effective $NO_x$ reduction technology in real driving conditions.

농업분야 온실가스 배출량 산정의 불확도 추정 및 평가 (Estimation of Uncertainty on Greenhouse Gas Emission in the Agriculture Sector)

  • 배연정;배승종;서일환;서교;이정재;김건엽
    • 농촌계획
    • /
    • 제19권4호
    • /
    • pp.125-135
    • /
    • 2013
  • Analysis and evaluation of uncertainty is adopting the advanced methodology among the methods for greenhouse gas emission assessment that was defined in GPS2000 (Good practice guideline 2000) and GPG-LULUCF (GPG Land Use, Land-Use Change and Forestry). In 2006 IPCC guideline, two approaches are suggested to explain the uncertainty for each section with a national net emission and a prediction value on uncertainty as follows; 1) Spread sheet calculation based on the error propagation algorithm that was simplified with some assumptions, and 2) Monte carlo simulation that can be utilized in general purposes. There are few researches on the agricultural field including greenhouse gas emission that is generated from livestock and cultivation lands due to lack of information for statistic data, emission coefficient, and complicated emission formula. The main objective of this study is to suggest an evaluation method for the uncertainty of greenhouse gas emission in agricultural field by means of intercomparison of the prediction value on uncertainties which were estimated by spread sheet calculation and monte carlo simulation. A statistic analysis for probability density function for uncertainty of emission rate was carried out by targeting livestock intestinal fermentation, excrements treatment, and direct/indirect emission from agricultural lands and rice cultivation. It was suggested to minimize uncertainty by means of extraction of emission coefficient according to each targeting section.

전국 논 토양 이산화탄소 배출량 추정을 위한 DNDC 모형의 국내 적용성 평가 (Evaluating the Applicability of the DNDC Model for Estimation of CO2 Emissions from the Paddy Field in Korea)

  • 황원재;김용성;민현기;김정규;조기종;현승훈
    • 환경생물
    • /
    • 제35권1호
    • /
    • pp.13-20
    • /
    • 2017
  • 본 연구는 대한민국 전역을 대상으로 국외에서 개발된 토양 온실가스 배출 모형인 DNDC 모형을 적용하여 논 토양에서 배출되는 $CO_2$를 추정하였다. 모형의 국내 적용성 평가를 위해서 2015년부터 2016년 경기도 지역 논 토양을 대상으로 폐쇄형 챔버를 이용해 $CO_2$ 배출량을 실측하고, 모형으로부터 산출된 추정값과 비교했다. DNDC 모형 검증결과 추정값과 관측값의 RMSE, ME, $r^2$이 각각 22.2, 0.28, 0.53으로 통계적으로 신뢰할 수 있었다. 전국 $CO_2$ 배출량 예측 결과, 연간 총 배출량은 $5,314kt\;CO_2-eq$이며 이는 전국 $CH_4$ 총 배출량의 77% 수준이었다. 행정구역별로는 전라도가 가장 많은 배출량을 보였으며, 논의 면적이 많을수록 총 배출량이 높았다. 국토의 단위면적당 $CO_2$ 배출량은 $2.2{\sim}10.0t\;CO_2-eq\;ha^{-1}year^{-1}$ 범위에 있었으며, 평균값은 $4.3t\;CO_2-eq\;ha^{-1}year^{-1}$ 이었다. 지역적으로는 한반도 중부지역 보다 남부지역에서 단위면적당 배출량이 더 높게 나타났다. 본 연구를 통해서, DNDC 모형은 국내 논 토양에서 배출되는 $CO_2$ 발생량을 유의하게 모의한 것으로 나타났다. 보다 더 정교한 온실가스 예측을 위해서는 기후특성, 토양특성, 작물경작특성 및 작물생육 특성을 고려하여 예측하는 것이 중요하며, DNDC 모형의 신뢰도를 높이려면 국내 농업생태계의 환경 및 생물인자를 모의할 수 있는 세부모형을 개발하는 것이 필요하다.

개별차량 속도기반 온실가스 배출량 산정 연구 (GHGs Emissions Based on Individual Vehicles Speed)

  • 장현호;최성훈;윤병조
    • 한국재난정보학회 논문집
    • /
    • 제15권4호
    • /
    • pp.560-569
    • /
    • 2019
  • 연구목적: 온실가스는 전 세계적인 재난인 지구 온난화의 주요 원인 중 하나이다.본 연구에서는 도로부문 온실가스 배출량 산정을 기존의 방법보다 정밀하게 산정하는 목적을 가진다. 연구방법: 기존에는 온실가스 배출량 산정에는 전체 차량의 평균속도를 이용한다. 본 연구에서는 개별차량의 속도를 이용해 온실가스 배출량 산정을 진행하여 기존의 방법과 비교분석을 진행한다. 연구결과: 기존의 배출량 산정 방법이 이산화탄소의 경우 약15%가 과소측정 되었음이 확인되었으며 아산화질소의 경우에 약 1%가 과대측정이 되었고 메탄의 경우 약 1%가 과소 측정 되었음이 확인되었다. 결론: 기존의 온실가스 배출량 산정 방법은 2000년 이전에 개발되어 가용자료의 한계에 맞추어 개발되었다. 하지만 기술의 발전으로 가용 자료의 질이 높아진 현재는 새로운 배출량 산정 방법이 필요하다. 따라서 본 연구에서는 진보된 자료에 맞는 좀 더 정밀한 온실가스 배출량 산정을 진행 할 수 있는 방법인 개별차량의 속도기반 온실가스 배출량 산정 방법을 제시한다.

AEIC 프로그램을 사용한 국내 공항 항공 온실가스 배출량 산정 (Emission Estimation for Airports in Korea Using AEIC Program)

  • 주희진;황호연;임동욱
    • 한국항행학회논문지
    • /
    • 제20권4호
    • /
    • pp.275-284
    • /
    • 2016
  • 항공기 배기가스가 지구의 현재와 미래의 기후에 미치는 잠재적 영향력은 항공산업계가 당면하고 있는 매우 중요한 환경 이슈 중 하나이다. 온실가스 배출의 잠재적 악영향에 대한 우려가 증가함에 따라 기후에 관한 항공기의 영향을 완화하는 수단 중 하나로 항공기 배기가스를 산정하고 예측할 필요성이 제기되고 있다. 따라서 본 연구에서는 항공기 배기가스의 산출과 저감효과 분석을 통한 항공기 온실가스 배출량을 최소화하여 미래 기후변화와 에너지 고갈에 대비하는 것을 연구목표로 한다. 우선 민간 항공 교통 스케줄을 보유한 OAG 데이터를 사용하여 우리나라 공항에 대한 항공 비행 일정을 확보하였다. 이후 미국 MIT 대학 항공 환경 실험실에서 개발한 AEIC 소프트웨어를 사용하여 2005년 한해 동안 우리나라 모든 공항에서의 3,000 ft 이하의 고도에서 이륙, 상승, 접근, 착륙단계를 포함하는 LTO 운항 시와 3,000 ft 이상의 고도에서 상승, 순항, 하강단계를 포함하는 non-LTO 운항 시의 연료소모량과 온실가스 배출량을 계산하여 결과 데이터를 각 조건별로 비교분석하였다.

시멘트산업의 CO2 배출계수 개발 및 대체연료 사용에 의한 온실가스 저감량 산정 연구 (Development of CO2 Emission Factors for Alternative Fuels with Assessment of Emission Reduction in Cement Industry)

  • 윤석경;명수정;장태혁;김진수;이시형;김기현;전의찬
    • 한국대기환경학회지
    • /
    • 제24권2호
    • /
    • pp.189-195
    • /
    • 2008
  • We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

대기오염 확산분석을 위한 복합모형 방법론 연구 (Studies on the Methodology of a Hybrid Model for Emission Dispersion Analysis)

  • 양충헌;구윤서;김인수;성정곤
    • 대한교통학회지
    • /
    • 제31권2호
    • /
    • pp.69-79
    • /
    • 2013
  • 본 연구에서는 대기오염 물질이 대기 변화에 따라 주변 지역의 오염농도에 미치는 영향 분석에 대한 필요성과 구체적인 방법론을 제시하였다. 이에 대한 사례연구로서 경기도 포천지역 도로망을 대상으로 본 방법론을 적용하였다. 본 연구에서 제시한 방법론은 1) 교통에서 배출된 오염물질만을 고려한 확산 분석, 2) 교통에서 배출된 오염물질과 주변오염물질농도를 결합하여 분석하는 두 가지 분석 모형을 포함하고 있다. 이를 통해 교통에 의해 발생된 대기오염물질이 교통망과 교통망 주변지역에 미치는 영향을 분석하는데 유용 할 것으로 판단된다. 또한, 교통에 의해 발생된 대기오염원과 대기오염원이 인체에 미치는 영향을 본 분석에 근거하여 도로주변 고농도의 대기오염물질에 의한 위해성(危害性)을 평가하는데 유용할 것으로 판단된다.