• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.39-46
• /
• 2005

We fabricate and analyze fully depleted optical thyristors (DOTs) using quarter wavelength reflector stacks (QWRS). QWRS are employed as bottom mirrors to enhance the emission efficiency as well as the optical sensitivity. In order to analyze their switching characteristics, S-shape nonlinear current-voltage curves are simulated and the reverse full-depletion voltages (Vneg's) of DOTs are obtained as function of semiconductor parameters by using a finite difference method (FDM). The fabricated DOTs show sufficient nonlinear s-shape I-V characteristics and switching voltage changes of these devices with and without bottom mirrors show 1.82 V and 1.52 V, respectively. Compared to a conventional DOT, this device with the bottom mirrors shows about 20％ and 46% enhancement in switching voltage change and spontaneous emission efficiency, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.6
• /
• pp.597-600
• /
• 1999

By periodically varying the current density and etching time during anodic oxidation of crustalline silicon wafers in 15% HF-ethanol solution, we obtained porous silicon multilayers which have periodically varying refractive index. We fabricated the porous silicon microcavity (PSM) which consist of porous silicon multilayers (I), active layer of porous silicon, and porous silicon multilayers (II) and investigated its physical properties. The AFM (Atomic Force Microscope) measurement from the cross section of multilayers (I and II) shows uniformity of high refractive index and low index layers as well as the active layer. We observed the characteristics of Bragg reflector when the thickness of layers was 1/4 and the thickness of active layer was twice of the effective wavelength, which can be used as a filter for specific wavelength. We found the emission characteristic from the PSM, which FWHM (full width half maximum) was considerably decreased and emission intensity was increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.600-604
• /
• 2011

In this paper, the scintillation properties of $LaCl_3:Eu^{2+}$ crystal were investigated as new scintillator. This scintillation material was grown by a Czochralski method. $LaCl_3:Eu^{2+}$ was determined to have a hexagonal $P_63$/m space group with cell parameters a = b = $7.48{\AA}$, c = $4.37{\AA}$. Under 335 nm UV excitation, the crystal shows a broad emission band between 370 nm and 640 nm wavelength range, peaking at 430 nm. At room temperature, the crystal exhibits one exponential decay time component. The component of scintillation time profile of the crystal emission decays with a $2.82{\pm}0.72{\mu}s$ time constant. The energy resolution of the crystal was measured to be 8.8% (FWHM) for $^{137}Cs$ 662 keV ${\gamma}$-rays.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2007

A $CaAl_{12}O_{19}:Mn^{4+}$ red phosphor showed the highest emission intensity at a concentration of 0.02mole $Mn^{4+}$ and the high crystallinity and luminescent properties were obtained at $1600^{\circ}C$ firing temperature for 3hr. The synthesized phosphor showed a broad emission band at 658nm wavelength. Red light-emitting diodes(LEDs) were fabricated through the integration of on InGaN UV bare chip and a 1:3 ratio of $CaAl_{12}O_{19}:Mn^{4+}$ and epoxy resin in a single package. This coated LED can be applicable to make White LEDs under excitation energy of UV LED.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.291-298
• /
• 2005

Two-dimensional (2D) spectrofluorometer is often used to monitor various fermentation processes. The change in fluorescence intensities resulting from various combinations of excitation and emission wavelengths is investigated by using a spectra subtraction technique. But it has a limited capacity to classify the entire fluorescence spectra gathered during fermentations and to extract some useful information from the data. This study shows that the self-organizing map (SOM) is a useful and interpretative method for classification of the entire gamut of fluorescence spectral data and selection of some combinations of excitation and emission wavelengths, which have useful fluorometric information. Some results such as normalized weights and variances indicate that the SOM network is capable of interpreting the fermentation processes of S. cerevisiae and recombinant E. coli monitored by a 2D spectrofluorometer.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.709-714
• /
• 2003

Eu doped $Y_2$ $O_3$ nanoparticles were prepared with the solvothermal synthesis using the ethyleneglycol solvent at 20$0^{\circ}C$ for 3-5 h and then annealed in air at 1000-140$0^{\circ}C$ for 2-4 h. The X-ray diffraction pattern of annealed crystals at 100$0^{\circ}C$ for 2 h could be indexed as pure cubic cell of $Y_2$ $O_3$ phase with lattice parameters a=10.5856 $\AA$ which is very close to the reported data (JCPDS Card File, 41-1105 a=10.6041 $\AA$). Average size of prepared phosphor particles have about 100 nm, which were spherical morphology. The phosphor particle sizes decreased and the emission intensity increased at the annealing temperature. Though PL spectrum analysis, the 3% Eu doped $Y_{2-x}$ $O_3$:E $u_{x}$ $^{3+}$(x=0.06) phosphor showed the excitation spectrum at 250 nm wavelength and the maximum emission spectrum at 611 nm wavelength.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.357-362
• /
• 2005

As a new class of electroluminescent (EL) polymers, PPV-based polymers containing sulfone group in the main chain were synthesized through Witting polymerization reaction to control n-conjugation length and energy levels for predictable light emission and enhanced device performance. These EL polymers showed good solubility in common organic solvents and high thermal stability with initial decomposition temperature of ca. $400^{circ}$ and glass transition temperature around $200^{circ}C$ Emission colors were tuned from green to deep blue by reducing ${\pi}$-conjugated length between sulfone groups. It was also noted from the cyclic voltammetry (CV) measurements and semiempirical calculations that sulfone group with high electron affinity effectively lowered HOMO-LUMO energy levels to enhance EL device performance.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.318-322
• /
• 1999

Perdeuterated hexaflouroacetylacetonato-neodymium [$Nd(HFA-D)_3$] complexes were synthesized by the keto-enol tautomerism reaction of $Nd(HFA-D)_3$ in methanol-d$_4$ in order to reduce the radiationless transition to the ligands. The emission properties of $Nd(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents; $Methanol-d_4$, $Aceton-d_6$, $THE-d_8$ and $DMSO-d_6$, and these properties depended on the coordination ability of solvent molecules. The intensity and lifetime of the emission in dimethysulfoxide (DMSO-$d_6$) were superior to those in other in other deuterated solvents. It was suggested that the anhydrous $DMSO-d_6$might be the most appropriate solvent for the liquid laser material of $Nd(HFA-D)_3$ complex.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.121-131
• /
• 2014

This study analyzed the spectral reflectance characteristics of kaolinite and ASTER(Advanced Spaceborne Thermal Emission and Reflectance Radiometer) image to extract the distribution of kaolin mines in Hadong area, Gyeongsangnam-do. The band ratio model was applied to extract kaolinite using difference of wavelength absorption band distinct feature of minerals from ASTER image which is the major mineral of kaolin mines. According to the spectral reflectance curve of kaolinite, it showed the absorption features around 0.96 and $2.18{\mu}m$ by Al-OH. Also, it affected 1.24 and $1.38{\sim}1.41{\mu}m$ by OH. Applying for new band ratio model from the spectral features of kaolinite to ASTER image, it is possible to make the distribution map of mining traces including present- developing kaolin mines.

• Journal of the Korean Chemical Society
• /
• v.44 no.4
• /
• pp.350-355
• /
• 2000

The compounds, CaAl$_2$(BO$_3$)$_2$O, SrAl$_2$(BO$_3$)$_2$O and BaAl$_2$(BO$_3$)$_2$O, are good host lattices for highly efficient $Eu^{2+}$ luminescence. The europium emission peaks at 450 nm in $Eu^{2+}$:CaAl$_2$(B0$_3$)$_2$O, 411 nm in $Eu^{2+}$: SrAl$_2$(BO$_3$)$_2$O and 375 nm in $Eu^{2+}$: BaAl$_2$(BO$_3$)$_2$O. The $Eu^{2+}$: CaAl$_2$(BO$_3$)$_2$O Phosphor shows a high output and should be a good maintenance in VUV Xe lamps. It is ideally suited for use in PDP phosphors. The $Eu^{2+}$ ion is interesting because the Stokes shift emission is a strong host dependent. The difference in the Stokes shift is oneimportant factor leadingto a difference in wavelength. If the 5d level of $Eu^{2+}$ ion is lower in energy,according to a decrease in the doping lattice size, then the emission wavelength will be longer and the Stokes shift will be smaller. Therefore, a knowledge of the relationship between the crystal lattice size and the Stokes shift. (orthe energy of the 5d level),is essential for beingable to predict $Eu^{2+}$ emission properties.