• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.131-140
• /
• 2011

On 1 July 2000, as the over-65 year-old population numbered 3,371,000 and accounted for over 7.1% of Korea's total population, an aging society was revealed. The over-65 percentage climbed to 11.0% by late 2010. A truly aged society is expected soon, by 2019. This aging society requires marketing research concerning the consumer behaviour and well-being of the elderly, because the 'silver generation' is emerging as a large part of the consumer market. The purpose of this study is to empirically analyse one effect among several satisfaction factors in the consuming cycle of various health functional products on consumer's well-being and the effect of product knowledge on the relationship between product satisfaction and well-being. To achieve this purpose, we established a research model after reviewing previous studies on product satisfaction, product knowledge, and consumer's well-being. The following hypotheses were developed from the research model. Hypothesis 1: When elderly consumers' satisfaction with health functional products increases, their well-being will increase. Hypothesis 2: The effect of their satisfaction with health functional products on their well-being will be strengthened according to the level of their knowledge of the products. Those hypotheses were tested by multiple and moderated regressions to the empirical data through a questionnaire survey. As a result, Hypothesis 1 was totally adopted, and Hypothesis 2 was only partially adopted. The study has many practical implications for well-being marketing. First, in order to heighten the elderly consumer's well-being, the level of his or her satisfaction with the health functional products has to be raised in every stage: during the acquisition, preparation, use, maintenance, and disposition of the consumption cycle. Moreover, promoting positive emotional experiences while diminishing negative ones requires effort because a consumer's well-being is made up of various needs. Second, the marketing of health functional products should be invigorated in order to raise the level of elderly consumers' knowledge of them. In other words, it is important to give them an expertise in the health functional products through different channels. A statistical analysis showed, however, that their knowledge has a decisive effect on only two satisfaction stages, preparation and maintenance. Nevertheless, this merely confirmed the intuitive assumption that the knowledge of health functional products is most relevant to their preparation and maintenance. In conclusion, this study is timely because few empirical studies exist on the relationships between silver consumer behaviour and well-being marketing. It contributes to our understanding of this subject by revealing the causality between the silver consumer's satisfaction and his or her well-being in the consumption cycle and by discovering the moderating influence of knowledge in that process.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.11a
• /
• pp.3-31
• /
• 1997

Water has always played a significant role in the lives of people. In urbanised Rome, with its million people. sophisticated supply systems developed and then fled with the empire. only to be rediscovered later But it was the industrial Revolution commencing in the eighteenth century that ushered in major paradigm shifts In use and altitudes towards water. Rapid and concentrated urbanisation brought problems of expanded demands for drinking supplies, waste management and disease. The strategy of using water from local streams, springs and village wells collapsed under the onslaughts of rising urban demands and pollution due to poor waste disposal practices. Expanding travel (railways. and steamships) aided the spread of disease. In England. public health crises peaks, related to water-borne typhoid and the three major cholera outbreaks occurred in the late eighteenth and early nineteenth century respectively. Technological, engineering and institutional responses were successful in solving the public health problem. it is generally accepted that the putting of water into pipe networks both for a clean drinking supply, as well as using it as a transport medium for removal of human and other wastes, played a significant role in towering death rates due to waterborne diseases such as cholera and typhoid towards the end of the nineteenth century. Today, similar principles apply. A recent World Bank report Indicates that there can be upto 76％ reduction in illness when major water and sanitation improvements occur in developing countries. Water management, technology and thinking in Australia were relatively stable in the twentieth century up to the mid to late 1970s. Groundwater sources were investigated and developed for towns and agriculture. Dams were built, and pipe networks extended both for supply and waste water management. The management paradigms in Australia were essentially extensions of European strategies with the minor adaptions due to climate and hydrogeology. During the 1970s and 1980s in Australia, it was realised increasingly that a knowledge of groundwater and hydrogeological processes were critical to pollution prevention, the development of sound waste management and the problems of salinity. Many millions of dollars have been both saved and generated as a consequence. This is especially in relation to domestic waste management and the disposal of aluminium refinery waste in New South Wales. Major institutional changes in public sector water management are occurring in Australia. Upheveals and change have now reached ail states in Australia with various approaches being followed. Market thinking, corporatisation, privatisation, internationalisation, downsizing and environmental pressures are all playing their role in this paradigm shift. One casualty of this turmoil is the progressive erosion of the public sector skillbase and this may become a serious issue should a public health crisis occur such as a water borne disease. Such crises have arisen over recent times. A complete rethink of the urban water cycle is going on right now in Australia both at the State and Federal level. We are on the threshold of significant change in how we use and manage water, both as a supply and a waste transporter in Urban environments especially. Substantial replacement of the pipe system will be needed in 25 to 30 years time and this will cost billions of dollars. The competition for water between imgation needs and environmental requirements in Australia and overseas will continue to be an issue in rural areas. This will be especially heightened by the rising demand for irrigation produced food as the world's population grows. Rapid urbanisation and industrialisation in the emerging S.E Asian countries are currently producing considerable demands for water management skills and Infrastructure development. This trend e expected to grow. There are also severe water shortages in the Middle East to such an extent that wars may be fought over water issues. Environmental public health crises and shortages will help drive the trends.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.225-233
• /
• 2012

The 3D stereoscopic image contents have been emerging as the blue chip of the contents market of the next generation since the . However, all the 3D contents created commercially in the country have failed to enter box office. It is because the quality of Korean 3D contents is much lower than that of overseas contents and also current 3D post production process is based on 2D. Considering all these facts, the 3D editing process has connection with the quality of contents. The current 3D editing processes of the production case of are using the way that edits with the system on basis of 2D, followed by checking with 3D display system and modifying, if there are any problems. In order to improve those conditions, I suggest that the 3D editing process contain more objectivity by visualizing the depth data applied in some composition work such as Disparity map, Depth map, and the current 3D editing process. The proposed process has been used in the music drama , comparing with those of the film . The 3D values could be checked among cuts which have been changed a lot since those of , while the 3D value of drew an equal result in general. Since the current process is based on an artist's subjective sense of 3D, it could be changed according to the condition and state of the artist. Furthermore, it is impossible for us to predict the positive range, so it is apprehended that the cubic effect of space might be perverted by showing each different 3D value according to cuts in the same space or a limited space. On the other hand, the objective 3D editing by applying the visualization of depth data can adjust itself to the cubic effect of the same space and the whole content equally, which will enrich the 3D contents. It will even be able to solve some problems such as distortion of cubic effect and visual fatigue, etc.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.115-124
• /
• 2020

Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.9-16
• /
• 2019

In today's global energy market, the importance of green energy is emerging. Hydrogen energy is the future clean energy source and one of the pollution-free energy sources. In particular, the fuel cell method using hydrogen enhances the flexibility of renewable energy and enables energy storage and conversion for a long time. Therefore, it is considered to be a solution that can solve environmental problems caused by the use of fossil resources and energy problems caused by exhaustion of resources simultaneously. The purpose of this study is to efficiently produce hydrogen using plasma, and to study the optimization of DME reforming by checking the reforming reaction and yield according to temperature. The research method uses a 2.45 GHz electromagnetic plasma torch to produce hydrogen by reforming DME(Di Methyl Ether), a clean fuel. Gasification analysis was performed under low temperature conditions ($T3=1100^{\circ}C$), low temperature peroxygen conditions ($T3=1100^{\circ}C$), and high temperature conditions ($T3=1376^{\circ}C$). The low temperature gasification analysis showed that methane is generated due to unstable reforming reaction near $1100^{\circ}C$. The low temperature peroxygen gasification analysis showed less hydrogen but more carbon dioxide than the low temperature gasification analysis. Gasification analysis at high temperature indicated that methane was generated from about $1150^{\circ}C$, but it was not generated above $1200^{\circ}C$. In conclusion, the higher the temperature during the reforming reaction, the higher the proportion of hydrogen, but the higher the proportion of CO. However, it was confirmed that the problem of heat loss and reforming occurred due to the structural problem of the gasifier. In future developments, there is a need to reduce incomplete combustion by improving gasifiers to obtain high yields of hydrogen and to reduce the generation of gases such as carbon monoxide and methane. The optimization plan to produce hydrogen by steam plasma reforming of DME proposed in this study is expected to make a meaningful contribution to producing eco-friendly and renewable energy in the future.

• Journal of Intelligence and Information Systems
• /
• v.27 no.3
• /
• pp.29-56
• /
• 2021

Recently, various types of products have been launched with the rapid growth of the e-commerce market. As a result, many users face information overload problems, which is time-consuming in the purchasing decision-making process. Therefore, the importance of a personalized recommendation service that can provide customized products and services to users is emerging. For example, global companies such as Netflix, Amazon, and Google have introduced personalized recommendation services to support users' purchasing decisions. Accordingly, the user's information search cost can reduce which can positively affect the company's sales increase. The existing personalized recommendation service research applied Collaborative Filtering (CF) technique predicts user preference mainly use quantified information. However, the recommendation performance may have decreased if only use quantitative information. To improve the problems of such existing studies, many studies using reviews to enhance recommendation performance. However, reviews contain factors that hinder purchasing decisions, such as advertising content, false comments, meaningless or irrelevant content. When providing recommendation service uses a review that includes these factors can lead to decrease recommendation performance. Therefore, we proposed a novel recommendation methodology through CNN-based review usefulness score prediction to improve these problems. The results show that the proposed methodology has better prediction performance than the recommendation method considering all existing preference ratings. In addition, the results suggest that can enhance the performance of traditional CF when the information on review usefulness reflects in the personalized recommendation service.

• Journal of Korean Theatre Studies Association
• /
• no.49
• /
• pp.5-47
• /
• 2013

Among the styles of performing arts, perhaps the genre that has attracted the largest audience would be musical. Popularity of musical has brought diverse changes in our performing arts market, and, upon emerging another musical genre, called 'Korean Traditional Musical Comedy,' it has been well-received by the audiences. 'Korean Traditional Musical Comedy' is a word that are formed by merging two other terms such as 'Korean Traditional Music' and 'Musical (Comedy).' In the meantime, however, it has yet some problems in order to be defined as the genre that has concrete concepts. It is because the term such as Korean Traditional Musical Comedy was created being closely associated with a marketing purpose rather than a term that defines the characteristics of a genre of performing arts. Although this new musical genre has drawn attentions of many audiences by adding 'Musical Comedy' to 'Korean Traditional Music' that was not quite popular to the public, it still does not have any established forms so that there is a fine line between "Korean Traditional Musical Comedy" and another genre like traditional style folk opera ("Changgeuk"). Looking at the characteristics of the musical work called 'Korean Traditional Musical Comedy, in general, first of all, it is a performance where music and drama are played. Here, the distinctive characteristic of this musical is that 'Korean Traditional Music' is sung. And the kinds of Korean traditional musics being sung are mainly Pansori (dramatic story-singing) and folk-songs, and, in most cases, Korean traditional musical instruments are being used as accompanying music. In this paper, the researcher investigated the aspects of experiment centering around Korean Musical Group, Taroo. These days, various experiments has been repeated not only for the works of Taroo but other musical work presently called 'Korean Traditional Musical Comedy' also. Having encompassed overall performance factors including use of musical instruments, dance, acting, materials for drama as well as music in drama, the researcher has gone through experiments repeatedly. Meanwhile, however, the subject matters that make 'Korean Traditional Musical Comedy' mostly attractive to the audiences are music and songs or sounds. ["Sori" also called "Chang" (唱)] Particularly, under the current situation of our musicals, the role of "Sori" is extremely important. The factor that plays absolutely most important role in acceptance and transformation of "Sori" is the created Pansori. Since the created Pansori is composed with new rhythmic patterns and new narrative poems, it tells the present story. Also it draws good responses from the audiences owing to easy conveyance of dialogues. And, its new style brings diversification to organization of musical instruments, so then this leads to the arrangements of music for Korean traditional music instruments, as well as instrumental music ensemble, orchestra, and jazz band, etc. Likewise, upon appearing creative musics in 'Korean Traditional Musical Comedy,' professional music and vocal compositions have begun to emerge naturally. And, the song specialist and writer, of course, staffs including direction, lighting, and sounds, etc are required. That is, professional composition method are forced to be introduced to all areas. Other than this, there are many music pieces which are based on our unique songs and sounds ("Sori") and such traditional factors as use of lead singer for ceremony or chorus, and the method that puts weight on Pansori. Accordingly many things accomplished. However, it is required that 'Korean Traditional Musical Comedy' go through numerous discussions and more experiments. Above all, the most important things are the role of actor and actress, and their changes, and training of actor and actress further. Good news is there are good audience responses. 'Korean Traditional Musical Comedy' is an open genre. As musicals are divided into several domains according to the characteristics thereof, 'Korean Traditional Musical Comedy' will be able to show its distinctive features in various styles according to embodiment.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.274-291
• /
• 2020

This year is the 50th anniversary of the adoption by UNESCO in 1970 of the Convention on the Means of Prohibiting and Preventing the Illicit Import, Export, and Transfer of Ownership of Cultural Property (the '1970 Convention'). Since its ratification of the 1970 Convention in 1983, the Republic of Korea has domestically implemented the Convention through its Cultural Heritage Protection Act, which was first enacted in 1962. This is a different form of implementation than is normally used for other UNESCO Conventions on cultural heritage, in that the Republic of Korea has recently adopted special acts to enforce the 2003 Convention for the Safeguarding of Intangible Cultural Heritage and the 1972 Convention concerning the Protection of the World Cultural and Natural Heritage. In addition, the 1970 Convention has been developed further through the introduction of new Operational Guidelines in 2015 for the concrete enforcement of the Convention, which has provided momentum for the Republic of Korea to analyze its current national legislation related to the 1970 Convention as well as consider its amendment in the future. Overall, the Cultural Heritage Protection Act of the Republic of Korea effectively reflects the duties of States Parties under the 1970 Convention. These include measures to introduce export certificates, prohibit the import of stolen cultural property, return other state parties' cultural property, and impose penalties or administrative sanctions in the event of any infringements. Indeed, the Republic of Korea's implementation of the 1970 Convention was introduced as an example of good practice at the Meeting of State Parties in 2019. However, changes in the illegal market for cultural property and development of relevant international law and measures imply that there still exists room for improvement concerning the legal implementation of the 1970 Convention at the national level. In particular, the Operational Guidelines recommend States Parties to adopt legal measures in two respects: detailed criteria for due diligence in assessing bona-fide purchasers, referring to the 1995 UNIDROIT Convention on Stolen or Illegally Exported Cultural Objects, and measures to address the emerging issue of illegal trade in cultural property on internet platforms. Amendment of the Cultural Heritage Protection Act and other relevant laws should be considered in order to duly reflect these issues. Taking that opportunity, concrete provisions to facilitate international cooperation in respect of the implementation of the 1970 Convention could be introduced as well. Such measures could be expected to strengthen the Republic of Korea's international legal cooperation to respond to the changing environment regarding illicit trafficking of cultural property and its restitution.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.23-53
• /
• 2023

In this review paper, previous studies on layered double hydroxides (LDHs) published in the Korean Citation Index (KCI) were examined to investigate a research trend for LDHs in Korea. Since the first publication in 2002, 160 papers on LDHs have been published until January 2023. Among the 31 academic fields, top 5 fields appeared in the order of chemical engineering, chemistry, materials engineering, environmental engineering, and physics. The chemical engineering shows the highest record of published paper (71 papers) while around 10 papers have been published in the other four fields. All papers were reclassified into 15 research fields based on the industrial and academic purposes of using LDHs. The top 5 in these fields are in order of environmental purification materials, polymer catalyst materials, battery materials, pharmaceutical/medicinal materials, and basic physicochemical properties. These findings suggest that researches on the applications of LDH materials in the academic fields of chemical engineering and chemistry for the improvement of their functions such as environmental purification materials, polymer catalysts, and batteries have been being most actively conducted. The application of LDHs for cosmetic and agricultural purposes and for developing environmental sensors is still at the beginning of research. Considering a market-potential and high-efficiency-eco-friendly trend, however, it will deserve our attention as emerging application fields in the future. All reclassified papers were summarized in our tables and a supplementary file, including information on applied materials, key results, characteristics and synthesis methods of LDHs used. We expect that our findings of overall trends in LDH research in Korea can help design future researches with LDHs and suggest policies for resources and energies as well as environments efficiently.