• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.611-617
• /
• 2017

In this study, it was expected that long-term stability against external mechanical external force could be secured if the phosphor layer had ductility. In this study, a bendable $Gd_2O_2S:Tb$ sensitized paper was fabricated by screen printing method and the image uniformity was evaluated through RMS analysis and histogram analysis to investigate the effect of fatigue accumulation due to long-term external force and repetitive external force. As a result, the dominant pixel area is maintained constant and the relative standard deviation is less than 10% for the long-term external force. However, for the repetitive external force, the dominant pixel area is divided into three areas and the image uniformity is adversely affected. Based on these results, it is suggested that the curved surface detector can be applied by securing the mechanical stability against the existing radiation sensitized paper. However, further studies are needed to apply it to the flexible detector. As a result, flexible radiation sensitizers can be applied to various curved surfaces, and it is expected to be applicable to various fields such as nuclear medicine, medical treatment, and industrial fields in the future.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.1
• /
• pp.20-26
• /
• 2016

Sympathetic reaction to grotesque facial injuries with oral bleeding can trigger confusion and generate inefficiency among emergency room personnel. Regardless of the extent of the injury, or of the sympathy elicated, the victim must be evaluated and treated as a whole patient with multiple trauma. There must be no confusion as to order of importance in the steps of evaluation : 1. airway 2. hemorrhage 3. shock 4. associated injuries 5. local injury 6. triage of facial injuries. The most dangerous aspect of oral hemorrhage is the possibility of its obstructing the upper airway. Swallowing large amounts of blood will usually cause gastric irritation and lead to vomiting, thus further complicating the management of the patient. Once a clear airway is assured and hemorrhage have been controlled, consideration is given to possible associated injuries before undertaking treatment of the facial injuries themselves. Status of the cardiopulmonary, gastrointestinal and neuromuscular systems all have a bearing on decisions concerning facial injury treatment. In this light, treatment priority becomes exceeding important. On the other hand, the importance of facial injuries should never be minimized, especially in a mentally retarded patient with oral hemorrhage. This is a case report about oral hemorrhage control as treatment priority in a mentally retarded patient.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.567-575
• /
• 2012

A research was conducted to develop a 2-D nonlinear Galerkin finite element analysis of reinforced concrete structures subjected to high temperature with experiments. Algorithms for calculating the closed-form element stiffness for a triangular element with a fully populated material conductance are developed. The validity of the numerical model used in the program is established by comparing the prediction from the computer program with results from full-scale fire resistance tests. Details of fire resistance experiments carried out on reinforced concrete slabs, together with results, are presented. The results obtained from experimental test indicated in that the proposed numerical model and the implemented codes are accurate and reliable. The changes in thermal parameters are discussed from the point of view of changes of structure and chemical composition due to the high temperature exposure. The proposed numerical model takes into account time-varying thermal loads, convection and radiation affected heat fluctuation, and temperature-dependent material properties. Although, this study considered standard fire scenario for reinforced concrete slabs, other time versus temperature relationship can be easily incorporated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.342-348
• /
• 2014

Onshore great fires can normally be extinguished by firefighters using special firefighting equipment and its suitable method. However, offshore fires on the ships are to be extinguished by the crew without any supports from the onshore. Also, crews working on board are exposed to high risk of emergency evacuation due to the complicated structure arrangement of the ships and different accident types such as fire and ship collisions. As most of damage and loss of life in fire are associated with suffocation, shortening of evacuation time is an important factor to improve a survival rate. In this study, visibility in the accommodation area is analyzed by using the temperature and smoke flow which are obtained by the Fire Dynamic Simulator(FDS) as a Three-Dimensional Fire Analysis program to understand the survival rate of the crew upon the fire. The fire doors for most of ships are designed to close automatically when the fire alarm is activated. These automatic closing of the fire doors is a very effective system to delay the spread of flame and smoke flow for the unmanned spaces of the fire protected area. However, if the crew cannot escape within the estimated time, the crew inside the fire protected area will be damaged a lot. In this paper, the comparative analysis between the evacuations by using the fire door from the fire protected area and the suggested fire shielding structure in this study is carried out by the smoke flow rate and the temperature rise rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.102-109
• /
• 2019

This paper describes the design of the circuit card assembly to eliminate the communication error on a servo control unit installed in the automated resupply vehicle K56. K56 is a weapon system that automates the supply and loading of ammunition on the K-55A1 self-propelled artillery. As the core item responsible for ammunition movement control, the servo control unit is required to have good communication stability and reliability, but the conventional unit has recognized a problem that communication error intermittently occurs, resulting in an emergency stop phenomenon. We analyzed the communication signal of the servo control unit and identified the failure cause of the circuit card assembly to solve this problem. In addition, the signal interference in data/address line of the circuit card assembly was confirmed through analysis of the failure cause, and redesigned to avoid the interference, such as adjustment of the distance between communication lines and position change. Finally, the proposed cause analysis and redesign were verified through the component of servo control unit and attachment test on K56. We expected these study results to be used as reference for the design of other similar items.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.807-815
• /
• 2008

The brittle failure where is occurred the welding position of column-beam flange of WUF-B connection that consider about a seismic detail possess a superior ductility capacity before Northridge earthquake 1994, require newly study about WUF-B connection. SAC Steel Project suggests a seismic detail to FEMA-350 by supporting of FEMA. It revise shape of weld access holes of WUF-B connection, welding processand welding material etc, In spite of these revision, AISC Seismic Provisions (2005) prescribe WUF-B connection using an only OMF. Recently in Korea, as the earthquake of about seismic intensity 5 occur, the necessity of revision for connection seismic detail comes to the front in Korea and FEMA-350 connection seismic details are going to include in KBC-2008 as it is. In this study, two column-beam connection specimens were marked by using SM490, SN490 built-up H-section, and based on WUF-B detail prescription of FEMA350. The parameters of the specimens are types of steel (SM, SN), and evaluate the capacities of structure and seismic by experiment. Finally we confirm a superior ductility capacity aboutspecimens JB-1 and JB-2, using SM490 and SN490,and these specimens had sufficient OMF and SMF seismic capacity, as indicated in AISC Seismic Provisions (2005).

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.179-184
• /
• 2018

In this study, we compared the measured values of the effective beam size of standard gamma irradiator with the simulation results to provide a useful means to the effective beam area determination. Results of the simulation and measured using ion chamber was distributed in a relative error of 4.5 ~ 7.3% of the case of air kerma rate. The size of the effective beam area is when the simulation was implemented in the horizontal direction 27cm, 21.6cm vertical direction, the measured result using a film was obtained similar results with the horizontal direction 26.5cm, 21.9cm vertical direction. The relative error in the horizontal direction is 1.85% and 1.38% vertical effective beam area was also similarly distributed around the field gamma rays. As a result of the study, it was confirmed that the effectiveness of the simulation was sufficient for the gamma irradiation system. In particular, it is small relative errors in the effective beam size than the air kerma rate is considered to be due to the size of the beam is determined by geometric factors rather than the capacity of the standard source. A further study is needed to improve the reliability of the photon energy distribution diagram using simulation.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.171-175
• /
• 2017

In the non-destructive inspection field, we invest a lot of time and resources in developing the radiation source system to ensure the safety of the workers. However, the probability of accidents is still high. In order to prevent potential radiation accidents in advance, it is necessary to directly verify the position of the radiation source, but the research is still insufficient. In this study, we developed a monitoring system that can detect the position of the radiation source in the source guide tube in the gamma-ray irradiator. The characteristics of the radiation detector are estimated by monte carlo simulation. As a result, the radiation detector for Ir-192 gamma-ray energy was analyzed to have secondary electron equilibrium at $150{\mu}m$ regardless of the semiconductor material. Also, it is expected that the gamma ray response characteristic is the best in $HgI_2$. These results are expected to be used as a basis for determining the optimal thickness of the radiation detector located in the detection part of the future monitoring system. In addition, when developing a monitoring system based on this, radiation workers can easily recognize the danger and secure safety, as well as prevent and preemptively respond to potential radiation accidents.

• Journal of Internet Computing and Services
• /
• v.8 no.1
• /
• pp.57-70
• /
• 2007

This paper is to construct a healthcare database using information obtained from healthcare home environments, and use this one for healthcare home services, Especially, our researching focus in this paper is how to design healthcare database scheme and how to use this constructed database on the Framework for Supporting Healthcare Integrated Service(FSHIS) we developed previously. Healthcare information is designed to database schemes in accordance to the specific save types of the data collected from various typed-sensors. The healthcare database constructed by using this information for the purpose of healthcare home services is divided into the base information with real schemes and the context based information with view schemes. Firstly, the base information includes low data obtained from physical sensors relevant to locations, healths, environments, and the personnel healthy profiles. The other is the context based information that is produced and fused by using the based information. This context based information might be got via various view schemes according to healthcare application services. Finally, for verifying the practical use of healthcare database constructed in this paper, Via interconnecting this database to our FSHIS, we show an example of healthcare home monitoring service using information (basic and context based information), emergency call, home appliance control, and so on needed from living activity area for elderly living alone.

• Journal of Home Health Care Nursing
• /
• v.5
• /
• pp.20-31
• /
• 1998

The purpose of this study was to develop the framework of community-based home care nursing delivery system, and to examine the validity of it. For these, home care nursing study team of College of Nursing, Seoul National University has studied home care nursing system since September, 1996, and has operated home care center since August, 1997. This study has been supported by the Korean Sience Foundation. We organized Committee of rules, and Clinical specialist consultant group for more efficient running of the home care center. In nursing station, research assistant controlled general work, and 5 home care nurses were hired for home visiting. We developed the Standards for operations, that included criteria for clients, central supply system of nursing materials, central management of nursing care cost, advertisement, patient referral system, and so forth. In our center, 108 patients enrolled, and neurologic disorders including cerebrovascular accident, and cancer were the most prevailing diseases. We tried to overcome the limitations of hopital -based home care, and to provide more accessible, efficient, safe, and stable home care nursing. Therefore, we were referred clients from patients and families, public health care center, industries, as well as from hospitals. Meanwhile, we developed home care recording system and assessment-intervention algorithm for various diseases for quality control and standardization. Also, we did continuing education, and tried to detect problems and to find solutions by regular meeting between the committee of rules and home care nurses. As the results of this study, several limitations of operation were found. First, it was difficult to manage and communicate with the doctor in the emergency situation, Second, we spent too much time for trasnsportation, because only five nurses covered all areas of Seoul and nearby cities. Third, preparation for special care of home care nurses were lacked. Forth, criteria for termination of care and frequency of home visit were ambiguous. Fifth, some difficulties were found in retrospective payment system. And finally, interconnection with home care machinery company were needed. Strategies for solving these problems were suggested.