• Journal of Korea Multimedia Society
• /
• v.15 no.4
• /
• pp.526-539
• /
• 2012

This paper proposes a high capacity data hiding method using high frequence secret data indexing algorithm. Many novel data hiding methods based on LSB and PVD methods were presented to enlarge hiding capacity and provide an imperceptible quality. In this paper, first, calculating data iteration frequency of the secret message and make up the high frequency data index matrix (HFDT) using high frequence data's location information. Next, HFDT uses to that data hiding process on the cover image and recovering process on the stego image. The experimental results demonstrate the efficiency of the proposed high frequency secret data indexing method. For the data hiding method, experiments are conducted for four cases: 2 pattern secret data (2PD), 4 pattern secret data (4PD), 8 pattern secret data (8PD) and higher pattern secret data (HPD). When comparing the proposed method with other data hiding methods, for the HPD case, the results show that the proposed method has a good PSNR and more capacity, and for the other case, the results show that the proposed method has a higher PSNR and larger capacity.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.319-328
• /
• 2013

Considerable number of major countries have put great efforts to leverage the efficiency of power consumption using Smart Grid in order to resolve the critical issues with drastical growing demands regarding electricity, the crisis of environmental pollution and so on. There has been increasing number of researches to construct Smart Grid in Korea as well. The threats of cyber terror attacks which might cause national crisises in terms of economy and society have been climbing up because of the fact that Smart Grid employs bi-directional communications embedding the cyber threats from existing/legacy communication networks. Consequently, it is required to build concrete response processes including investigation and analysis on cyber breaches into Smart Grid. However, the digital evidence acquisition techniques do not suffice to be deployed in Smart Grid systems despite of the fact that the techniques, against cyber breaches into well-known networks, have been studied in plenty of time. This work proposes a novel digital evidence acquisition scheme appropriate to Smart Grid systems through intensive investigation of the evidence acquisition requirements in Smart Grid and the historical evidence acquisition methods.

• Journal of the Korean Society for information Management
• /
• v.35 no.2
• /
• pp.63-88
• /
• 2018

This research evaluated differences of classification performance for feature selection methods using LDA topic model and Doc2Vec which is based on word embedding using deep learning, feature corpus sizes and classification algorithms. In addition to find the feature corpus with high performance of classification, an experiment was conducted using feature corpus was composed differently according to the location of the document and by adjusting the size of the feature corpus. Conclusionally, in the experiments using deep learning evaluate training frequency and specifically considered information for context inference. This study constructed biomedical document dataset, Disease-35083 which consisted biomedical scholarly documents provided by PMC and categorized by the disease category. Throughout the study this research verifies which type and size of feature corpus produces the highest performance and, also suggests some feature corpus which carry an extensibility to specific feature by displaying efficiency during the training time. Additionally, this research compares the differences between deep learning and existing method and suggests an appropriate method by classification environment.

• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.190-198
• /
• 2018

We fabricated high transmission and high scattering poly(ethylene-co-vinyl acetate)(EVA) films embedding $SiO_2$ nanoparticles to improve outcoupling efficiency in organic display. The 800nm diameter $SiO_2$ nanoparticles aggregated and formed $1.56{\mu}m$ (with ${\pm}0.853{\mu}m$ standard deviation) diameter microparticles in EVA. The total transmission of scattering film was 83.3% on Polyethylene terephthalate(PET), which was higher than reference 82.8% PET substrate. The diffuse transmission and haze of the $SiO_2$ embedded EVA film were 76.1% and 91.4%, respectively. The optimized condition was 1:1 weight ratio of $SiO_2$ nanoparticles to EVA in Tetrahydrofuran(THF) solution. When the ratio of $SiO_2$ was larger than 1, the total transmission decreased by the increase in backscattering of light due to high scattering. With the optimized condition, we could succeed to fabricate a large scale film(35m in length) with a roll-to-roll process.

• Journal of Surface Science and Engineering
• /
• v.41 no.6
• /
• pp.255-263
• /
• 2008

Generally, deposition mechanism of diamond particle is mainly embedding effect in the kinetic spray process. Accordingly, in spite of high cost, helium gas was employed as process gas to get high diamond fraction in the composite coating. In this study, the deposition behavior of bronze/diamond by kinetic spray process was compared using different process gas (helium and nitrogen). Bare (mean size of $5{\mu}m$, $20{\mu}m$) and nickel coated diamond (mean size of $26{\mu}m$) were deposited on Al 6061-T6 substrate with fixed process temperature and pressure. For comparison with experimental results, plastic deformation behavior of nickel layer was simulated by finite element analysis (using ABAQUS/Explicit 6.7-2). The size, broken ratio, and fraction of diamond in the composite coating were analyzed through scanning electron microscopy and image analysis method. The uniform distribution and deposition efficiency of diamond particles in the coating layer could be achieved by tailoring the physical properties of the feedstock.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.198-205
• /
• 2005

Double-layered polymer films to assay the radioactive contamination were formulated using polysulfone (PSF) and cerium activated yttrium silicate (CAYS), consisting of a dense support layer and a CAYS-holding top layer prepared via the diffusion-induced phase inversion. As the vapor exposure process was omitted, the CAYS-holding layer showed a typical asymmetric structure, with CAYS being transfixed into the polymer network spread with large macropores. With the increase in vapor exposure time before immersion, morphology of the films transformed from asymmetric to sponge-like structures, with CAYS being localized in cellular structure. The border structure between the two layers reflects the phase inversion behavior of a cast solution during the coagulation. In the radioactive detection, the polymer phase in a film holding a sponge-like structure is so dense that the radionuclides, deposited on the film, could not filter through the phase, consequently resulting in the loss in the detection efficiency of the film.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1617-1622
• /
• 2004

MPEG/Audio decoder for mobile multimedia systems requires low power consumption. Implementations of AV decoder using a single RISC processor often need high power consumption owing to cash-miss in case of insufficient cash memory. In this paper, we present a MPEG/Audio decoder for mobile handset applications and implement it on a RISC processor embedding a minimized DSP accelerator. Audio decoding algorithm is splined into two parts; computation intensive and control intensive parts. Those parts we, respectively, allocated to DSP and RISC core, which are designed to run in parallel to increase the processing efficiency. The proposed system implements MP3 and AAC decoders at l7MHz and 24MHz clocks, which are reductions of 48% and 40% of complexities in comparison with implementations on a single RISC processor. The proposed method is adequate for mobile multimedia applications with insufficient cash memory.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.4
• /
• pp.246-254
• /
• 2006

A computation program has been developed for automatic data processing in the calibration process of gamma survey meter. The automatic processing program has been developed based on Visual Basic. The program has been coded according to steps of calibration procedure. The OLE(object linking an embedding) Excel automation method fur automatic data processing is used in this program, which is a kind of programming technique for the Excel control. The performance test on the basis of reference data has been carried out by using the developed program. In the results of performance test, the values of calibration factors and uncertainties by the developed program were equal to those obtained from the reference data. In addition, It was revealed that the efficiency and precision of working are significantly increased by using the developed program.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.41-47
• /
• 2019

It is very important to search for and obtain an example of a similar judgment in case of court judgment. The existing judge's document search uses a method of searching through key-words entered by the user. However, if it is necessary to input an accurate keyword and the keyword is unknown, it is impossible to search for the necessary document. In addition, the detected document may have different contents. In this paper, we want to improve the effectiveness of the method of vectorizing a document into a three-dimensional space, calculating cosine similarity, and searching close documents in order to search an accurate judge's example. Therefore, after analyzing the similarity of words used in the judge's example, a method is provided for extracting the mode and inserting it into the text of the text, thereby providing a method for improving the cosine similarity of the document to be retrieved. It is hoped that users will be able to provide a fast, accurate search trying to find an example of a tax-related judge through the proposed model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.4
• /
• pp.39-47
• /
• 2004

In general, the steganographic algorithm for embedding message in JPEG images, such as Jsteg$^{(1)}$ , JP Hide ＆ Seek$^{(2)}$ , F5$^{(3)}$ , outGuess$^{(4)}$ replaces the LSB of DCT coefficients by the message bits. Both Jsteg and n Hide ＆ seek are detected by $\chi$$^2$- test, steganalytic technique$^{(4)}$ , the rate of detection is very low, though. In this Paper, we Propose a new steganalysis method that determine not only the existence of hidden messages in JPEG images exactly, but also the steganographic algorithm used. This method is advanced from the technique Blockiness$^{(5)}$ . It has many advantages that include a computational efficiency, correctness and that can detect without bowing steganographic algorithm. Experiment results show the superiority of our approach over Blockiness$^{(5)}$ .