• 전기학회논문지P
• /
• 제53권2호
• /
• pp.94-99
• /
• 2004

In this paper, We design a RF control system capable of handling multiple POS thermal printers. The system has three parts including embedded master controller, RF controller and high-speed thermal printer. Specially the designed linux embedded controller has simple structure and high performance to connect the TCP/IP network. The effectiveness of the developed RF control system is shown by proposed food ordering system.

• 대한임베디드공학회논문지
• /
• 제8권6호
• /
• pp.295-301
• /
• 2013

In this paper, we propose a real-time centralized soft motion control system for high speed and precision robot control. The system engages EtherCAT as high speed industrial motion network to enable force based motion control in real-time and is composed of software-based master controller with PC and slave interface modules. Hard real-time control capacity is essential for high speed and precision robot control. To implement soft based real time control, The soft based master controller is designed using a real time kernel (RTX) and EtherCAT network, and servo processes are located in the master controller for centralized motion control. In the proposed system, slave interface modules just collect and transfer all sensor information of robot to the master controller via the EtherCAT network. It is proven by experimental results that the proposed soft motion control system has real time controllability enough to apply for various robot control systems.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1827-1834
• /
• 2016

This paper presents a high efficient generator with PM(Permanent Magnet) exciter. The proposed PM exciter for the generator can produce a linear output voltage according to the engine speed. This output voltage is directly used to control the field current of the generator to adjust the generator output voltage. In the proposed generator system, since the field winding current can be supplied by the PM exciter, the generator can self-start without any battery or an external power supply due to the low residential flux. Furthermore, the operating efficiency of the generator is higher than a conventional winding exciter. The main problem of the proposed generator system, the field winding current controller has to be embedded inside the generator, and it rotates according to the generator shaft. In this paper, the proper embedded current controller is designed for the proposed generator system. Due to the embedded controller cannot be connected to the outside the generator controller, the measured instantaneous output voltage of the generator is transferred by the photo isolated communication using shaft aligned infrared transmitter and receiver to keep the constant generator output voltage. In this paper, 10kW, 380V engine generator with PM exciter and the embedded DAVR(Digital Automatic Voltage Regulator) are described. The proposed high efficiency generator is simulated and tested to verify the effectiveness.

• 한국인터넷방송통신학회논문지
• /
• 제10권1호
• /
• pp.69-74
• /
• 2010

현재 CAN(controller Area Network)통신은 노이즈에 강인한 시리얼통신으로 전자모듈에 많이 사용하고 있다. 특히, CAN통신은 자동차 전자제어모듈, 엔진제어유닛, 센서모듈 등 자동차 부분에 많이 사용되는 방식 이지만 CAN 통신의 연결노드 우선순위와 오류가 낮아 공장자동화 라인에도 적용되고 있다. CAN통신은 기본적으로 전기 노이즈에 강인하여 적용가능한 분야가 다양하다고 사료된다. 본 연구에서는 High-Speed, Full-CAN에서 2개의 CAN Node를 사용하여 임베디드 시스템용으로 오류 검출이 가능한 CAN통신 인터페이스를 설계 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.68.4-68
• /
• 2002

$\textbullet$ This report presents an implementation a set of reusable software components which use of fault-tolerance embedded controller for railway signalling systems. These components can be used in real-time applications without application reprogramming. $\textbullet$ This library runs under VxWorks operating system and is oriented on real-time embedded systems. The library includes fault detection, fault containment, checkpointing and recovery components. $\textbullet$ The library enables to support high-speed response to fault occurrence in application software. Garbage collector together with VxWorks Watchdog provides both dead tasks detection and useless resources removing to avoid an overflow. Control flow...

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.171-177
• /
• 2004

Many instrumentations have been used to acquire the performance data of military systems fer many years. But they could not satisfy environmental specifications(vibration, shock, temperature) and processing speed to apply for the performance test of military systems because of having developed as common vehicles/fixed installation equipments. Thus a new rugged embedded measurement system is required to process large data in high processing speed(Maximum sample rate:1.25Mhz/ch) with rugged environmental specifications. We have developed embedded measurement systems by using PXI(PCI extension for Instrumentation)bus interface composed of a stand alone controller and versatile data acquisition boards(analog, digital, vision, temperature and small signal conditioner) on PC-based environment to solve these problems. Operation programs have been developed using Lab_View and the performances have been validated experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.53.1-53
• /
• 2001

We have used many Instrumentations to acquire the performance data of vehicles for many years. but these could not satisfied with environment specifications (vibration, shock, temperature) and data processing speed to applicate the performance test for armored military vehicles because of having developed as a common vehicles/fixed installation equipments. So new rugged embedded measurement system required to do large data acquisition and high processing speed (Maximum sample rate : 1.25MHz/ch) with rugged environment specifications. We have developed embedded measurement system by using PXI(PCI eXtension for Instrumentation)bus interface which were composed of stand alone controller and versatile data acquisition boards(analog, digital, vision ...

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.354-358
• /
• 1992

This paper describes a development of high speed fuzzy inference circuit for the industrialprocesses. The hardware fuzzy inference circuit is developed utilizing a hardware fuzzy inference circuit is developed utilizing a DSP and a multiplier and accumulator chip. To enhance the inference speed, the pipeline disign is adopted at the bottleneck and the general Max-Min inference method is slightly modified as Max-max method. As a results, the inference speed is evaluated to be 100 KFLIPS. Owing to this high speed feature, satisfactory application can be attained for complex high speed motion control as well as the control of multi-input multi-output nonlinear system. As an application, the developed fuzzy inference circuit is embedded to a PLC (Porgrammable Logic Controller) for industrial process control. For the fuzzy PLC system, to fascilitate the design of the fuzzy control knowledge such as membership functions, rules, etc., a MS-Windows based GUI (Graphical User Interface) software is developed.

• 한국전자통신학회논문지
• /
• 제8권2호
• /
• pp.279-284
• /
• 2013

본 논문에서는 경제적이고, 채널 확장성이 용이하며, 다양한 성능시험에 대응이 가능한 솔레노이드 타입의 인젝터 컨트롤러를 연구 개발하고 그 성능을 평가하였다. 개발된 컨트롤러는 임베디드 시스템에 기반을 두고 있으며, 인젝터에서 고압으로 분사되는 연료의 분사 타이밍 및 분사량에 대한 정밀제어는 물론 솔레노이드의 전기적인 특성을 측정하여 인젝터의 성능평가도 가능하다. 또한, 부가적으로 인젝터의 분무 형태를 정밀하게 촬영할 수 있는 광원과 초고속 카메라의 정밀시간제어도 동시에 가능하도록 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1798-1799
• /
• 2011

In this paper, A new cost-effective and accurate input noise rejection method for High Speed Counter module of PLC (Programmable Logic Controller) is proposed. By using combination of simple additional logic circuit and the Timer Pulse function of general purpose MPU, Cost-effectiveness and improvement of accuracy of filtering function can be achieved. This proposed method is verified by simulation. This proposed method is much useful for simple industrial controller based on simple microprocessor because of simplicity, accuracy and low cost.