• 한국통신학회논문지
• /
• 제35권8B호
• /
• pp.1232-1240
• /
• 2010

임베디드 SW에 있어서 미국은 세계 최고 기술 보유국이며 유럽, 일본, 한국 순으로 기술력을 보유하고 있다. 특히 지능형 SW 분야는 미국에 이어 한국 및 유럽의 기술력이 높이 평가되고 있으며 일본을 다소 앞선 것으로 평가되고 있고 응용 및 서비스 SW 중 일부 분야에서는 한국의 기술 수준이 선진국 대비 동등하거나 우수한 수준을 나타내고 있다. 본 논문에서는 국내외 임베디드 SW 기술동향과 국가별 기술수준 및 기술격차를 알아보고 임베디드 SW 산업육성을 위한 제고전략을 도출하고자 한다.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.257-273
• /
• 2014

This paper introduces a novel optimization technique based on gravitational search algorithm (GSA) for numerical optimization and multi-objective optimization of foundation. In the proposed method, a chaotic time varying system is applied into the position updating equation to increase the global exploration ability and accurate local exploitation of the original algorithm. The new algorithm called global-local GSA (GLGSA) is applied for optimization of some well-known mathematical benchmark functions as well as two design examples of spread foundation. In the foundation optimization, two objective functions include total cost and $CO_2$ emissions of the foundation subjected to geotechnical and structural requirements are considered. From environmental point of view, minimization of embedded $CO_2$ emissions that quantifies the total amount of carbon dioxide emissions resulting from the use of materials seems necessary to include in the design criteria. The experimental results demonstrate that, the proposed GLGSA remarkably improves the accuracy, stability and efficiency of the original algorithm.

• 한국농공학회논문집
• /
• 제62권1호
• /
• pp.117-126
• /
• 2020

The area of facility horticulture in Korea is increasing rapidly, the single-span pipe house which uses galvanized steel pipe as the main rafters occupies 78.7% of the facility area. Lightweight structures such as the single-span pipe house are vulnerable to meteorological disasters such as strong winds, economic losses of the state, local governments and farmers are continuing as construction does not meet the design standards. In order to minimize economic losses in the horticultural specialty facilities sector, the Rural Development Administration has been operating the horticultural disaster resilient standard for horticultural specialty facilities since April 2007. The only standard for the pipe connector is the disaster resilient standard, there is no standard for the uplift capacity of the house pipe foundation and the research on it is also insufficient. The purpose of this study is to investigate the characteristics of uplift capacity according to the foundation type, compaction ratio and embedded depth through soil box test. The results of the maximum uplift capacity according to the type, compaction ratio and embedded depth can be used as the basic data for the basic design of the pipe house conforming to the disaster resilient standard. Due to the limitation of soil box test, it may be different from the behavior of pipe house installed on site. In the future, the field test and the actual pipe house should be made and supplemented by comparing this result with the field test values.

• Geomechanics and Engineering
• /
• 제5권3호
• /
• pp.187-194
• /
• 2013

The most soil anchor works have been concerned with the uplift problem on embedded in non-reinforced soils under pullout test. Symmetrical anchor plates are a foundation system that can be resisting tensile load with the support of around soil in which symmetrical anchor plate is embedded. Engineers and authors proved that the uplift response can be improved by grouping the symmetrical anchor plates, increasing the unit weight, embedment ratio and the size of symmetrical anchor plates. Innovation of geosynthetics in the field of geotechnical engineering as reinforcement materials found to be possible solution in symmetrical anchor plate responses. Unfortunately the importance of reinforcement in submergence has received very little attention by researchers. In this paper, provision of tensile reinforcement under embedded conditions has been studied through uplift experiments on symmetrical anchor plates by few researchers. From the test results it has been showed that the provision of geogrid reinforcement system enhances the uplift response substantially under uplift test although other results are such as increase the ultimate uplift response of symmetrical anchor plate embedded using geosynthetic and Grid Fixed Reinforced (GFR) and symmetrical anchor plate improvement is very dependent on geosynthetic layer length and increases significantly until the amount of beyond that further increase in the layer length does not show a significant contribution in the anchor response.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.42-49
• /
• 2009

배전용 콘크리트 전주에 작용하는 힘들이 지반의 변위에 미치는 영향을 유한요소법을 이용하여 분석하였다. 지반의 종류, 풍하중, 근가의 위치, 매입길이, 경간의 길이를 변화시키며 단전주와 겹전주의 경우에 지반의 변위를 분석하였다. 근가의 위치는 매입길이의 1/4지점에서 변위가 최소로 나타났다. 지반의 종류는 지반의 강성이 클수록 변위가 작아서 연약한 점토나 느슨한 모래지반 또는 실트 지반은 변위가 크다. 겹전주는 굴착면적이 커서 변위가 다소 큰 것으로 판단되며 시공시에는 콘크리트보강이 필요하다. 지표면에 가까울수록 횡방향 변위는 매입길이비가 작은 전주가 더 크게 나타났다. 횡방향 변위를 줄이기 위해서는 매입길이를 크게 하는 것이 좋다. 경간길이는 횡방향 변위에 영향이 별로 없는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.192-200
• /
• 2010

Korea is part of a region of low or moderate seismic zone in which few earthquakes have been monitored, so it is difficult to approve design ground motions and seismic responses on structures from response spectrum. In this study, a series of dynamic centrifuge model tests for demonstrating seismic amplification characteristics in soil-foundation-structure system were performed using electro-hydraulic shaking table mounted on the KOCED 5.0 m radius beam centrifuge at KAIST in Korea. The soil model were prepared by raining dry sand and $V_S$ profiles were determined by performing bender element tests before shaking. The foundation types used in this study are shallow embedded foundation and deep basement fixed on the bottom. Total 7 building structures were used and the response of building structures were compared with response spectrum from the acceleration records on surface.

• Advances in materials Research
• /
• 제5권4호
• /
• pp.245-261
• /
• 2016

Thermo-mechanical buckling problem of functionally graded (FG) nanoplates supported by Pasternak elastic foundation subjected to linearly/non-linearly varying loadings is analyzed via the nonlocal elasticity theory. Two opposite edges of the nanoplate are subjected to the linear and nonlinear varying normal stresses. Elastic properties of nanoplate change in spatial coordinate based on a power-law form. Eringen's nonlocal elasticity theory is exploited to describe the size dependency of nanoplate. The equations of motion for an embedded FG nanoplate are derived by using Hamilton principle and Eringen's nonlocal elasticity theory. Navier's method is presented to explore the influences of elastic foundation parameters, various thermal environments, small scale parameter, material composition and the plate geometrical parameters on buckling characteristics of the FG nanoplate. According to the numerical results, it is revealed that the proposed modeling can provide accurate results of the FG nanoplates as compared some cases in the literature. Numerical examples show that the buckling characteristics of the FG nanoplate are related to the material composition, temperature distribution, elastic foundation parameters, nonlocality effects and the different loading conditions.

• Coupled systems mechanics
• /
• 제3권4호
• /
• pp.367-384
• /
• 2014

The study deals with the physical modeling of a typical single storeyed building frame resting on pile foundation and embedded in cohesive soil mass using the finite element based software SAP-IV. Two groups of piles comprising two and three piles, with series and parallel arrangement thereof, are considered. The slab provided at top and bottom of the frame along with the pile cap is idealized as four noded and two dimensional thin shell elements. The beams and columns of the frame, and piles are modeled using two noded one dimensional beam-column element. The soil is modeled using closely spaced discrete linear springs. A parametric study is carried out to investigate the effect of various parameters of the pile foundation, such as spacing in a group and number of piles in a group, on the response of superstructure. The response considered includes the displacement at the top of the frame and bending moment in columns. The soil-structure interaction effect is found to increase the displacement in the range of 38 -133% and to increase the absolute maximum positive and negative moments in the column in the range of 2-12% and 2-11%. The effect of the soil- structure interaction is observed to be significant for the type of foundation and soil considered in this study. The results obtained are compared further with those of Chore et al. (2010), wherein different idealizations were used for modeling the superstructure frame and sub-structure elements (foundation). While fair agreement is observed in the results in either study, the trend of the results obtained in both studies is also same.

• 한국지진공학회논문집
• /
• 제14권4호
• /
• pp.1-15
• /
• 2010

이 논문에서는 연약지반에 세워진 건축물의 지진해석을 위해서 기준의 지반증폭계수에 대한 기초묻힘으로 인한 저감계수를 산정하는 연구를 비선형 의사 3D 지진해석이 가능한 P3DASS 유한요소 프로그램으로 수행하였다. 지반은 30m 두께로 균질하고 탄성과 점성이 있는 등방성 연약한 지반으로 암반 위에 놓인 것으로 가정하였고, 기초는 반경이 10-70m인 등가원형 강체기초로 기초묻힘은 0, 10, 20, 30m인 경우를 고려하였다. 지진해석은 노두에서 실측한 7개 지진기록의 유효지진가속도를 0.1g로 조정한 후 연약지반 밑 암반에서 지진기록을 생성하여 수행하였다. 연구에 의하면 매우 연약한 지반에 소형기초가 깊게 묻힌 경우 외에는 지반증폭계수가 점진적으로 감소하고 기초크기에 따른 편차도 크지 않은 것으로 평가되어 기초반경 별로 구한 저감계수에 대한 평균에 표준편차를 더한 저감계수를 기초묻힘에 따른 표준저감계수로 산정하였다. 지반증폭계수에 대한 표준저감계수를 실용화와 KBC 등의 기준을 위해 지반의 평균전단파속도와 지반종류에 따라 제안하였다.

• Structural Engineering and Mechanics
• /
• 제49권5호
• /
• pp.661-672
• /
• 2014

Laminated Rectangular plates embedded in elastic foundations are used in many mechanical structures. This study presents an analytical approach for transverse bending analysis of an embedded symmetric laminated rectangular plate using Mindlin plate theory. The surrounding elastic medium is simulated using Pasternak foundation. Adopting the Mindlin plate theory, the governing equations are derived based on strain-displacement relation, energy method and Hamilton's principle. The exact analysis is performed for this case when all four ends are simply supported. The effects of the plate length, elastic medium and applied force on the plate transverse bending are shown. Results indicate that the maximum deflection of the laminated plate decreases when considering an elastic medium. In addition, the deflection of the laminated plate increases with increasing the plate width and length.