Bulky iron-core potential transformers (PT) are installed in a tank of gas insulated switchgears (GIS) for a system voltage measurement in power substations. In this paper, we studied an electronic voltage transformer (EVT) embedded in a spacer for miniaturization, eco-friendliness, and performance improvement of GIS. The prototype EVT consists of a capacitive probe (CP) that can be embedded in a spacer and a voltage Follower with a high input and a low output impedance. The CP was fabricated in the form of a Flexible-PCB to acquire the insulation performance and to withstand vibration and shock during operation. Voltage ratio of the prototype EVT is about 42,270, and the frequency bandwidth of -3 dB ranges from 0.33 Hz to 3.9 MHz. The voltage ratio error evaluated at about 6%, 12% and 18% of the rated voltage of 170 kV was 0.32%, and the phase error was 12.9 minutes. These results were within the accuracy for the class 0.5 specified in IEC 60044-7 and satisfy even in ranges from 80% to 120% of the rated voltage. If the prototype EVT replaces the conventional iron-core potential transformer, it is expected that the height of the GIS could be reduced by 11% and the amount of SF6 will be reduced by at least 10%.
본 논문에서는 위치추적과 방사선 측정이 가능한 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드 개발을 제안한다. 제안하는 방사선 피폭 방호 소방관 인명구조 경보기의 임베디드 보드는 신호 처리부, 통신부, 전원부, 메인 제어부 등으로 구성된다. 신호 처리부에서는 차폐설계, 노이즈 저감 기술 및 전자파 차감 기술 등을 적용한다. 통신부에서는 WiFi 방식을 사용하여 통신하도록 설계한다. 메인 제어부에서는 전력 소모를 최소한으로 줄이고 작고 밀도가 높으면서도 낮은 발열성을 통하여 높은 고성능 시스템을 구성한다. 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드는 재난 및 화재현장 등 열악한 환경에 노출되어 운영하는 장비이므로 방수와 내열성을 고려한 외형도 설계 및 제작을 한다. 제안된 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 효율을 판단하기 위하여 공인시험기관에서 실험하였다. 방수 등급은 소방관용 장비의 특성 상 재해 현장에서 물에 의한 침수 시에도 안정적인 성능을 유지할 수 있는 IP67 등급을 달성하였다, 동작 온도는 재해현장에서의 폭넓은 환경변화에 대응할 수 있는 -10℃~50℃의 범위에서 측정이 되었다. 배터리 수명은 붕괴사고 등의 비상 재난 상황에 대처할 수 있는 1회 충전 후 144시간 사용 가능함이 측정되었다. PCB를 포함한 최대 통신 거리는 재난 상황 시 지휘통제 차량과의 직선거리에서 기존의 50m보다 넓은 범위인 54.2m에서 작동하는 것이 측정되었다. 따라서 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 그 효용성이 입증되었다.
In this paper, a micro balanced filter in magnetically coupled LC resonators is proposed, designed, simulated by using FR-4 PCB substrate for low cost, small volume IEEE 802. 11a wireless LAN application. Two pair of coupled LC resonators using magnetic coupling of embedded inductors are applied to obtain bandpass transmission response and improve their phase and magnitude imbalance characteristics. In addition, high dielectric composite film is applied to fabricate the high Q MIM capacitors with small size and high capacitance density. It has an insertion loss of 1.4 dB, a return loss of 10 dB, a phase imbalance of 0.25 degree, and magnitude imbalance of 0.17 dB at frequency bandwidth of 200 MHz ranged from 5.15 GHz to 5.35 GHz, respectively. The proposed balanced filter has a small volume of $1.1mm{\times}1.3mm{\times}0.6mm$ (height).
This paper describes implementation of a robot programming system for automation of manufacturing products, which is embedded in the C programming language. World representation and motion primitives necessary to describe a manipulator task are provided by a set of procedure calls and user defined data structures. Off-line programming is implemented with graphic simulation as a debugging tool. PUMA 560 manipulators are used as a model for one task which inserts a nonstandard power IC Iota PCB. Communication facilities are provided for collision avoidance or two manipulators.
현재 다양한 종류의 RF 통신 제품이 시장에 등장하면서 제품의 경쟁력 확보에 있어 소형화 정도가 중요한 이슈가 되고 있다. Passive Device는 RF Circuit을 제작할 때 많은 면적을 차지하고 있으며 이를 감소시키기 위해 여러 연구가 진행되고 있다. 가장 효과적인 방법으로 반도체 집적기술로 크기를 줄이는 방법이 있으나, 공정이 비싸고 제작 시간이 오래 걸려 제품개발 시간과 개발비용이 상승하게 된다. 반면에 SoP-L 공정은 PCB 제작에 이용되는 일반적인 재료와 공정을 사용하므로 개발 비용과 시간을 줄일 수 있다. SoP-L의 또 하나 장점은 다종 재료를 다층으로 구성할 수 있다는 점이다. 최근 chip-type의 Device를 PCB 기판 안에 내장하는 방법의 RF Circuit 소형화 연구가 많이 진행되고 있다. 본 연구에서는 SoP-L 공정으로 chip-type 수동소자를 PCB 기판 내에 함몰하여 수동소자회로를 구현, 분석하여 보았다. 수동소자회로는 880 MHz~960 MHz(GSM) 영역과 1.71 GHz~1.88 GHz(DCS) 영역을 나누는 Diplexer를 구성하였다. 1005 size의 chip 6개로 구현한 Diplexer를 표면실장과 함몰공정으로 제작하고 Network Analyzer로 측정하여 비교하였다. chip 표면실장으로 구현된 Diplexer는 GSM에서 최대 0.86 dB의 loss, DCS에서 최대 0.68 dB의 loss가 나타났다. 표면실장과 비교하였을 때 함몰공정의 Diplexer는 GSM 대역에서 약 0.5 dB의 추가 loss가 나타났으며 목표대역에서 0.6 GHz정도 내려갔다. 이 결과를 바탕으로 두 공정 간 차이점을 확인하고, 함몰공정으로 chip-type 수동소자를 사용하였을 때 고려해야 할 점을 분석하였다. 이를 바탕으로 SoP-L 함몰공정의 안정성을 높여서 이것을 이용한 회로의 소형화에 적용이 가능할 것으로 기대한다. 특히 능동소자의 DC Power Control에서 고용량의 수동소자를 이용할 때 집적도를 높일 수 있을 것이다.
본 논문은 마이크로스트립과 슬롯라인 천이기술을 이용한 소형 전력분배기 설계를 제안하였다. 마이크로스트립과 슬롯라인 천이기술은 전력 분배기를 구성하는 ${\lambda}/4$ 전송선로를 멀티 레이어 구조 PCB를 이용하면 두개의 ${\lambda}/8$ 전송선로로 작게 구현할 수 있다. 여기서는 마이크로스트립과 슬롯라인 천이 지점에서 마이크로스트립 전송선로는 via를 사용하여 단락시켰고, 슬롯라인은 스파이럴 구조를 이용하여 전송선로의 길이를 짧게 사용하였다. 이러한 마이크로스트립과 슬롯라인 천이기술의 타당성을 보기위해서 중심주파수 2 GHz 에서 동작하는 전력분배기의 마이크로스트립 선로를 천이기술을 이용한 방법으로 구현하여 그 특성을 시뮬레이션, 제작 및 측정을 하여 기존의 전력분배기와 동일한 특성을 얻었다.
In electrical power substations, bulky iron-core potential transformers (PTs) are installed in a tank of gas-insulated switchgear (GIS) to measure system voltages. This paper proposed a low-power voltage transformer (LPVT) that can replace the conventional iron-core PTs in response to the demand for the digitalization of substations. The prototype LPVT consists of a capacitive voltage divider (CVD) which is embedded in a spacer and an impedance matching circuit using passive components. The CVD was fabricated with a flexible PCB to acquire enough insulation performance and withstand vibration and shock during operation. The performance of the LPVT was evaluated at 80%, 100%, and 120% of the rated voltage (38.1 kV) according to IEC 61869-11. An accuracy correction algorithm based on LabVIEW was applied to correct the voltage ratio and phase error. The corrected voltage ratio and phase error were +0.134% and +0.079 min., respectively, which satisfies the accuracy CL 0.2. In addition, the voltage ratio of LPVT was analyzed in ranges of -40~+40℃, and a temperature correction coefficient was applied to maintain the accuracy CL 0.2. By applying the LPVT proposed in this paper to the same rating GIS, it can be reduced the length per GIS bay by 11%, and the amount of SF6 by 5~7%.
Journal of electromagnetic engineering and science
/
제15권3호
/
pp.185-193
/
2015
In this paper, a hybrid multiple input multiple output (MIMO) antenna for eight-band mobile handsets is designed and implemented. For the MIMO antenna, two hybrid antennas are laid symmetrically and connected by an interconnection tie, thereby enabling complementary operation. The tie affects both the impedance and radiation characteristics of each antenna. Further, printed circuit board (PCB) embedded type is applied to the antenna design. To verify the results of this study, we designed eight bands-LTE class 12, 13, and 14, CDMA, GSM900, DCS1800, PCS, and WCDMA-and implemented them on a bare board the same size as the real board of a handset. The voltage standing wave ratio (VSWR) is within 3:1 over the entire design band. Antenna isolation is less than -15 dB at the lower band, and -12 dB at the WCDMA band. Envelope correlation coefficient (ECC) of 0.0002-0.05 is obtained for all bands. The average gain and efficiency are measured to range from -4.69 dBi to -2.88 dBi and 33.99% to 51.5% for antenna 1, and -4.74 dBi to -2.97 dBi and 33.45% to 50.49% for antenna 2, respectively.
Park Ho-Sik;Lee Jong-Hoon;Seo Soo-Jung;Lee Young-Kwan;Oh Yong-Soo;Jung Hyun-Chul;Nam Jae-Do
Macromolecular Research
/
제14권4호
/
pp.430-437
/
2006
The ultra-drawing process of an ultra high molecular weight polyethylene (UHMWPE) gel film was examined by incorporating linear low-density polyethylene (LLDPE) and $BaTiO_3$ nanoparticles. The effects of LLDPE and the draw ratios on the morphological development and mechanical properties of the nanocomposite membrane systems were investigated. By incorporating $BaTiO_3$ nanoparticles in the UHMWPE/LLDPE blend systems, the ultra-drawing process provided a highly extended, fibril structure of UHMWPE chains to form highly porous, composite membranes with well-dispersed nanoparticles. The ultra-drawing process of UHMWPE/LLDPE dry-gel films desirably dispersed the highly loaded $BaTiO_3$ nanoparticles in the porous membrane, which could be used to form multi-layered structures for electronic applications in various embedded, printed circuit board (PCB) systems.
As micro-system move toward higher speed and miniaturization, requirements for embedding the passive components into printed circuit boards (PCBs) grow consistently. They should be fabricated in smaller size with maintaining and even improving the overall performance. Miniaturization potential steps from the replacement of surface-mount components and the subsequent reduction of the required wiring-board real estate. Among the embedded passive components, capacitors are most widely studied because they are the major components in terms of size and number. Embedding of passive components such as capacitors into polymer-based PCB is becoming an important strategy for electronics miniaturization, device reliability, and manufacturing cost reduction Now days, the dielectric films deposited directly on the polymer substrate are also studied widely. The processing temperature below $200^{\circ}C$ is required for polymer substrates. For a low temperature deposition, bismuth-based pyrochlore materials are known as promising candidate for capacitor $B_2Mg_{2/3}Nb_{4/3}O_7$ ($B_2MN$) multi layers were deposited on Pt/$TiO_2/SiO_2$/Si substrates by radio frequency magnetron sputtering system at room temperature. The physical and structural properties of them are investigated by SEM, AFM, TEM, XPS. The dielectric properties of MIM structured capacitors were evaluated by impedance analyzer (Agilent HP4194A). The leakage current characteristics of MIM structured capacitor were measured by semiconductor parameter analysis (Agilent HP4145B). 200 nm-thick $B_2MN$ muti layer were deposited at room temperature had capacitance density about $1{\mu}F/cm^2$ at 100kHz, dissipation factor of < 1% and dielectric constant of > 100 at 100kHz.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.