• 한국안전학회지
• /
• 제11권2호
• /
• pp.96-101
• /
• 1996

The effects of coal type and mixing fraction of coal on attrition and elutriation were studied in a 15. 5cm diameter fluidized bed coal combustor. The domestic low-grade anthracite coal with heating value 2010kcal/kg and the imported bituminous coal from Australia with heating value of 6520kcal/kg were used as coal sample. It was found from the experimental that the elutriation rate inclosed with an increseing anthracite mixing fraction. The size of elutriated particle had a very wide distribution was found in this experiment. The mean size of elutriated particle increased with decreaseing anthracite mixing fraction.

• 한국결정성장학회지
• /
• 제5권4호
• /
• pp.414-422
• /
• 1995

석탄회를 요업원료로 재활용하기 위하여 하소 및 수비에 의하여 선별화 하였으며, 선별화의 영향을 고찰하기 위하여 비처리 석탄회와 하소 및 수비 처리한 석탄회의 결정상, morphology, 화학성분, 입도분포, 강열감량을 측정하였다. 또한, 기존의 점토 수비 실험식이 석탄회의 수비에도 적용될 수 있는지 여부를 조사하였다. 점토에 대한 수비 실험식을 석탄회의 수비에 적용한 결과 Rittinger의 실험식과 비교적 잘 일치하였다. 처리조건에 관계없이, 석탄회는 mullite와 quartz가 주결정을 이루고, 비처리 및 수비 처리한 석탄회에서는 calcite 결정이 관찰되었으나 하소한 경우 calcite의 결정 peak가 나타나지 않았다. 입자의 형태는 비처리 석탄회의 경우 cenosphere, coke type, silicate type, whisker type, aggregate type 입자로 이루어져 있고 하소한 경우에는 coke type 입자가 제거되고 상대적으로 aggregated type 입자가 많이 관찰되었다. 특히 수비 4단계의 경우에는 비교적 구형의 cenosphere가 많이 얻어졌다. 하소에 의해 입도분포가 좁아졌으며, 특히 수비에 의해서 매우 좁은 입도분포를 얻었다.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3274-3279
• /
• 2009

기-고 유동층에서 다입자경 입자의 입자분포 변화에 따른 비산유출 특성을 연구하였다. 다입자경 입자분포는 Gaussian 분포를 사용하여 실험을 수행하였다. 최소유동화속도에 대한 유속비와 Gaussian 입자분포의 표준편차에 따른 비산유출상수를 구하였으며, 이때 조업시간에 따른 압력요동의 특성치를 구하였다. 측정된 유동층의 압력요동 특성치로부터 압력요동의 표준편차, 평균압력, Power spectrum density function, 주진동수 등을 계산하였다. 입자분포군에 따라서 유출입자의 입자분포 및 압력요동 특성치는 크게 영향을 받는 것으로 나타났으며 이러한 결과로부터 압력요동 특성치로부터 유출특성의 해석이 가능함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제11권1호
• /
• pp.23-28
• /
• 1974

1. Stage crushing by jaw crusher, steel mortar, and ball mill in turn has shown an inclination to increase the distribution of andalusite in coarse particles as well as to increase that of micas in fine particles. 2. Water elutriation was effective for the removal of muscovite and magnetic separation was effective for that of Mg-Fe micas such as biotte and chlorite. The process of concentration and that of purification are diagramatized respectively as follows: Concentration; Raw andalusite${\lightarrow}$Crushing${\lightarrow}$Screening${\lightarrow}$Water elutriation${\lightarrow}$Magnetic separation Purification; Concentrated andalusite${\lightarrow}$Calcination${\lightarrow}$Ball milling${\lightarrow}$Screening${\lightarrow}$Water elutriation${\lightarrow}$Magnetic separation${\lightarrow}$Acid washing.

• 한국가축번식학회지
• /
• 제12권1호
• /
• pp.24-30
• /
• 1988

These experiments were carried out to develop new techniques for In Vitro separatin of X-and Y-bearing spermatozoa. The bull semen was applied to the various Gel-Columns filled with swellen Sephadex G-50 Fine and then elutriated wtih Locke solution (elutriation rate; 1ml/3-4min., 1ml/1-2min.). Elutriated solution was fractionated into 1ml by automatic Fraction Collector and spermatozoa included in each fraction were subjected to the estimation of viability and recovery rate, and to B-body test. The results obtained in these experiments were summarized as follows: 1. When the column size and the elutriation rate were adjusted to 15$\times$1.6cm and 1ml/3-4min., respectively, the highest sperm concentration was obtained from the 8th to the 12th fraction. 2. As a trend, the viability of spermatozoa was improved by chromatography, and the degree of improvement ranged 5 to 10 percentage. 3. The average recovery rate of spermatozoa applied to column was 73.2 percentage and ranged 52.6 to 81.3 percentage. 4. The lowest rate of B-body bearing spermatozoa following chromatography was obtained when the column size and the elutriation rate were adjusted to 15$\times$0.8cm and 1ml/1-2min., respectively.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.34-39
• /
• 2005

The performance of elutriated acid fermentation with slurry-type piggery waste was investigated, especially to evaluate the effects of temperature and pre-treatment. In the first phase, the acid elutriation reactor with piggery waste after centrifugation operated at both mesophilic and thermophilic conditions to evaluate the effect of temperature. Solubilization yield($gVFAs/gSCOD_{prod.}$) and acidification rate($gVFAs/gSCOD_{prod.}$) in the thermophilic digestion were 0.45 and 0.55, which were higher than those of the mesophilic digestion, 0.25 and 0.45. In addition, the acid elutriation reactor at thermophilic temperature is more effective in removing e-coli. In the second phase, the acid elutriation reactor was fed with piggery waste before centrifugation. With piggery wastes before centrifugation, the solubilization yield and the acidificaton rate were 0.40 and 0.80, respectively, which were higher than the rates using piggery waste after centrifugation at both mesophilic and thermophilic conditions. The higher sludge volume reduction of 80% benefits sludge management. Furthermore, economical advantages can be achieved by removing the pre-treatment process, such as centrifugation. Consequently, the treatment with piggery waste before centrifugation proved to be effective. Also, the optimum temperature condition was estimated at mesophilic or thermophilic conditions, considering solubilization yields and acidification rates, though the system should be heated.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 추계 학술발표회 논문집
• /
• pp.293-296
• /
• 2001

• 한국환경보건학회지
• /
• 제22권3호
• /
• pp.28-36
• /
• 1996

The objects of this study were to investigate emissions of air pollutant the particles as well as the combustibility of the low grade domestic anthracite coal and imported high-calorific bituminous coal in the fluidized bed coal combustor. The production of air pollution from anthracite-bituminous coal blend combustion in a fluidized bed coal combustor was evaluated. The effects of air velocity and anthracite fraction on the reaching time of steady state condition was also evaluated. We used coal samples the domestic low grade anthracite coal with heating value of 2,010 kcal/kg and the imported high grade bituminous coal with heating value of 6,520 kcal/kg. The experimental results are presented as follows. The time of reaching to steady state was affected by the temperature variation. The steady state time was about 120 minute at 0.3 m/s which was the fastest. It has been found that $O_2$ and $CO_2$ concentration were reached steady state at about 100 minute. As the height of fluidized bed becomes higher, the concentration s of $SO_2$ and $NO_x$ mainly increased. The concentration of freeboard was the highest and emission concentration was diminished. Also, as anthracite fraction increased, the emission of $SO_x$ concentration was increased. But, it has been found that the variation of $NO_x$ concentration with anthracite fraction was negligible and the difference of emission concentration according to air flow rates was negligible, too. It has been found that $O_2$ concentration decreased and $CO_2$ concentration increased as the height of fluidized bed increased. As anthracite fraction increased, the mass of elutriation particles increased, and $CO_2$ concentration decreased. Also, as air velocity increased, $O_2$ concentration decreased and $CO_2$ concentration increased. Regardless-of anthracite fraction and flow rate, the combustible weight percentage in elutriation particles were high in the case of fine particles.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.627-639
• /
• 1996

분기별 안산 및 보령 석탄회에 대한 특성변화를 조사하였고 안산 석탄회에 대한 수비 선별시 산처리의 영향을 고찰하고자 하였다. 분기별 안산 및 보령 석탄회의 주결정상은 mullite와 quartz였고, 주성분은 $Al_{2}O_{3}$와 $SiO_{2}$로서 발전소 및 채취시기에 따른 큰 변화가 없었다. 반면, 입도분포는 수 $\mu\textrm{m}$에서 백 $\mu\textrm{m}$ 이상의 넓은 입도분포를 갖으며 morphology는 안산 석탄회의 경우에 큰 변화가 있었다. 따라서 석탄회는 점토의 대체원료로 사용가능하나 원ㄹ의 안정적 수급을 위해서는 반드시 선별화가 선탱되어야 한다. 안산 석탄회의 수비처리시 pH를 조절함으로서 분산성이 향상되었기 때문에 4단계에서 대부분 cenosphere를 얻을 수 있었고 입도분포도 감소하였다. 또한 4단계에서 포집된 시료의 비표면적은 비처리 석탁회보다 크게 감소한 $1.24\;m^{2}/g$이었다.

• 보존과학회지
• /
• 제32권3호
• /
• pp.417-423
• /
• 2016

백토안료의 제조 공정 중 분쇄 및 수비단계에서 아교수를 적용하고 이에 따른 영향을 분석하였다. 분쇄 공정에서 아교수를 적용한 경우, 일반 증류수를 사용했을 때보다 미분의 생성량이 감소하고 분급도가 향상되는 것으로 나타났다. 일반적으로 분쇄 성능 및 분쇄 한계에는 마찰력이 많은 영향을 미친다. 따라서 분쇄 조건에 따른 마찰력을 측정한 결과, 아교수를 적용한 경우 상대적으로 마찰력이 감소하는 것으로 확인되었다. 결국 분쇄 공정에서 아교수를 사용하는 것은 마찰력을 감소시켜 결과적으로 분급도를 향상시키기 위한 것으로 판단된다. 안료 제조 공정 중 수비단계에서 아교수를 적용한 결과, 아교수 적용 시 동일한 조건에서 보다 큰 입도의 입자를 수비해 내는 것이 가능한 것으로 나타났다. 이와 같은 결과는 수비액으로 아교수를 사용한 경우, 아교의 농도가 증가함에 따라 수비액의 점도가 증가하여 입자의 침강속도가 감소하기 때문인 것으로 확인되었다. 결국 수비 공정에서 아교수를 사용한 것은 수비액의 점도를 증가시켜 수비를 통해 선별할 수 있는 입도의 범위를 확대하고, 보다 세밀한 입도 구간으로 입자를 선별하기 위한 것으로 판단된다.