• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.1
• /
• pp.77-84
• /
• 2014

The worm gear is used in the motor drive system of automotive CVVL because of its compactness and self-locking ability. A ZK worm and an involute helical gear can be meshed in order to reduce production cost. However, the gearing is not suitable for the reliability and the NVH problem. To improve the dynamic performances, an optimal design process is considered. The transmission error is calculated theoretically and minimized with the several gear design parameters. An inequality condition such as the teeth interference elimination is added.

• Korean Journal of Oriental Medicine
• /
• v.13 no.1 s.19
• /
• pp.109-114
• /
• 2007

The high position condition 10 escape which the obesity person appeals. Obesity Pattern-Identification question it will yell and 243 subjects which to the obesity in the patient of 517 subjects which draw up correspond. (longitude obesity 153 person, altitude obesity 90 person) against it analyzes. In order to analyze the reliability of the items which diagnose each Pattern-Identification it used Cronbach alpha coefficient and escape it did the alpha of each item. Alpha value of each Pattern-Identification than appears more highly the item which it will be able to consider an elimination in the item which decreases a reliability. In that phlegm-retention syndrome is bigger alpha coefficient 0.784 than 'meal quantity is few'(0.787) a possibility of seeing in the item which decreases a reliability to the place where it diagnoses it puts in phlegm-retention syndrome.

• Electrical & Electronic Materials
• /
• v.9 no.8
• /
• pp.783-788
• /
• 1996

In this paper, the high-$T_c$ , superconductor (HTS) microstrip patch antenna which is directly coupled to a microstrip transmission line is designed and the numerical solution which evaluate near electromagnetic field of HTS antenna is presented. This solution uses the interpolation function with the vector edge triangular element. The advantage of this element is the elimination of spurious solutions attributed to the lack of enforcement of the divergence condition. The results of this method have a good agreement with $TM_10$ mode in HTS microstrip patch antenna and show that the computation of resonant length considering the fringing capacitance effect at radiating edge are proper.

• Conservation Science in Museum
• /
• v.8
• /
• pp.25-30
• /
• 2007

One of the most important reasons why the method of IPM(Integrated pest management) was introduced to the museum is to prevent the damages by insects in the more efficient, economic and safer way. First, through monitoring the insects, the distribution, kinds, condition and inflow path of the insects should be confirmed, and then the safe and rational methods of prevention and elimination should be found in order to take more appropriate measures against them.

• Computers and Concrete
• /
• v.8 no.1
• /
• pp.111-123
• /
• 2011

Severe element distortion problem is observed in finite element mesh while performing numerical simulations of high velocity steel projectiles penetration/perforation of concrete targets using finite element method (FEM). This problem of element distortion in Lagrangian formulation of FEM can be resolved by using element erosion methodology. Element erosion approach is applied in the finite element program by defining failure parameters as a condition for element elimination. In this study strain parameters for both compression and tension at failure are used as failure criteria. Since no direct method exists to determine these values, a calibration approach is used to establish suitable failure strain values while performing numerical simulations of ogive-nose steel projectile penetration/perforation into concrete target. A range of erosion parameters is suggested and adopted in concrete penetration/perforation tests to validate the suggested values. Good agreement between the numerical and field data is observed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.2
• /
• pp.399-406
• /
• 1990

This paper is studied to know corrosive wear mechanism of STS304 steel on atmospherical temperature against mating material as the same. The corrosive test was carried out by rubbing the annular surface of two test pieces in distilled water and NaCl aqueous solution. The corrosive wear mechanism was investigated by S.E.M. The experimental results show that there is one Lcr transferring from severe wear to mild wear on change of NaCl concentration and atmospherical temperature, and which is the other still remaining in server wear state. It was found that the critical sliding distance Lcr shorten with increasing NaCl concentration but it is longer with ascending atmospherical temperature and the mild wear state still continues under the condition of high generation rate and elimination rate of the corrosive product. Considering upon the result, the model of corrosive wear mechanism is proposed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1119-1124
• /
• 2014

This paper describes the emergency situation which occurs in Drilling Rig power system. Especially, we focused on power system transient characteristics on propulsion motor load and generator elimination situation in Drilling Rig operation. We performed numerical simulation and analyzed the result for power system transient stability characteristics on each condition for excitation system and governor control system using ETAP (Electrical Transient Analysis Program).

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.41-46
• /
• 2006

When new weapons are introduced, the target points estimation is one of the important objectives in the flight test as well as the safe separation. The prediction methods help to design the flight test schedule. However, the incremental aerodynamic coefficients in the aircraft flow field so-called BSE are difficult to predict. Generally, the semiempirical methods such as the grid methods, IFM and Flow TGP using database are used for estimation of BSE. However, these methods are quasi-steady methods using static aerodynamic loads. Nowadays the time-accurate CFD method is often used to predict the store separation event. In the current process, the incremental aerodynamic coefficients in BSE regime are calculated directly, and the elimination of delta coefficients is checked simultaneously. This stage can be used for the initial condition of Flow TGP with freestream database. Two dimensional supersonic and subsonic store separation problems have been simulated and incremental coefficients are calculated. The results show the time when the store gets out of BSE region.

• Microbiology and Biotechnology Letters
• /
• v.23 no.3
• /
• pp.352-358
• /
• 1995

In this study, authors investigated the cadmium tolerance, the accumulation of cadmium, and the cellular distribution of accumlated cadmium in lactic acid bacteria under the anaerobic condition. Lactic acid bacteria grew fairly well in modified EG medium containing 10 ppm of cadmium but could hardly grow at 50 ppm of cadmium. Tolerance to cadmium of genus Lactobacillus was greater than that of genus Streptococcus, and Lactobacillus acidophilus showed the higest cadmium tolerance amomg the bacteria tested. The capacity of cadmium accumlation (9.304-12.428 mg/g wet cell) of lactic acid bacteria was higher than that (6.775 mg/g wet cell) of Escherichia coli. Lactobacillus casei of them took up the largest amount of cadmium. The cadmium elimination amount (28.46-29.25%) of lactic acid bacteria from modified EG medium containing cadmium were also higher than that (14.43%) of Escherichia coli. Accumulated cadmium in Lactobacillus acidophilus was distributed by 42.41% at cell wall, 28.97% at cytoplasm, and 28.62% at plasma membrane, respectively.

• Microbiology and Biotechnology Letters
• /
• v.11 no.3
• /
• pp.181-185
• /
• 1983

The possibility of the ethanol fermentation from raw cassava starch without cooking was investigated. Saccharification yield in the simultaneous saccharification-fermentation (SSF) system was compared with that in saccharification of raw cassava starch, using glucoamylase of Aspergillus shirousmi. Although the saccharification yield of raw cassava starch with 10 folds of the enzyme was 60% compared to cooked cassava starch, higher saccharification could be obtained by SSF This result is maybe due to the elimination of end product inhibition in saccharification of raw starch by glucoamylase. Final ethanol yield from raw cassava starch was about 88% under the condition of 3$0^{\circ}C$, 120 rpm shaking after 3 days in the SSF system.