• 전기학회논문지
• /
• 제67권10호
• /
• pp.1317-1321
• /
• 2018

PVDF as a semicrystal polymer, having a structure with C-F dipole moments, has been widely investigated because of its excellent chemical stability, mechanical strength, and ferroelectricity. In this study, ferroelectic ${\beta}$ type - PVDF layer was prepared by using an electrostatic spray deposition method and the effects of the addition of Ni-nitrate in precursor solution on the properties of PVDF layer were evaluated. Crystallinity and chemical structure of the PVDF layer were analyzed by a X-ray diffraction and Fourier Transform Infrared Spectrophotometer. Surface structure and fractured cross section of the layer were examined by a field emission-scanning electron microscope. LCR meter was used to obtain the dielectric properties of the layer. As the addition of an inorganic metal salt in PVDF sol, ${\beta}$ type - PVDF crystals were appeared in the hydrated metal salts doped-layer since the strong hydrogen bondings $(O-H{\cdots}F-C)_n$ due to high polarity of OH- were formed.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.45-49
• /
• 2010

$Li_2PtO_3$ thin film electrodes, which might be possible candidate for the cathode materials for implantable batteries, were synthesized using an electrostatic spray deposition (ESD) technique onto a platinum foil substrate. Single phase $Li_2PtO_3$with a structure similar to layered $LiCoO_2$ structure were synthesized by spraying a precursor solution of $CH_3CO_2Li2H_2O$ in ethanol onto a Pt substrate at temperatures ranging from 200 to $400^{\circ}C$ followed by annealing at above $600^{\circ}C$. Lithium carbonate was the only major phase at temperatures up to $500^{\circ}C$. The X-ray diffraction (XRD) peaks of the Pt foil substrate and lithium carbonate disappeared at temperatures >$600^{\circ}C$. The volumetric capacity of the $Li_2PtO_3$ thin film synthesized using the ESD technique was approximately 817 mAh/$cm^3$, which exceeded that of $LiCoO_2$ (711 mAh/$cm^3$).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.432-432
• /
• 2010

Organic light emitting diodes (OLED) thin films were fabricated by Electrostatic spray deposition (ESD). In this study, we reported the thickness, morphology, current efficiency, luminescence of OLED fabricated by ESD. These results were compared with the spin coating method, and showed that also ESD is a good fabrication method for OLED because of its characteristics similar with the results using spin coating. The active layer consists of organic blends with Poly(N-vinylcarbazole) (PVK), 2-(4-Biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD), N,N'-Bis(3-methylphenyl) -N,N'-bis(phenyl)-benzidine (TPD), Tris(2-phenylpyridine)iridium(III) (Ir(ppy)3), and the structure of OLED consists of aluminum (Al), lithium fluoride (LiF), organic blends, PEDOT:PSS and Indium-tin-oxide (ITO), which was used as the top cathode, cathode interfacial layer, emitting layer and bottom anode, respectively. The results suggest that Electrostatic spray deposition is a promising method for the next generation of OLED fabrication since it has a probability fabricating large-area thin films.

• 한국식품과학회지
• /
• 제52권6호
• /
• pp.670-677
• /
• 2020

본 연구에서는 가장 빈번하게 발생하는 세균성 식중독의 원인균인 C. jejuni의 주 감염원인 계육에 대하여, 식품공전에 등재된 식품첨가물 중 유화제를 이용하여 계육에서 C. jejuni의 부착을 제어 할 수 있는 기술을 확보하고자 하였다. 8종의 유화제를 200 mg/mL의 농도에서 paper disc agar diffusion method로 C. jejuni에 대한 항균활성을 검색한 결과 L-7D, L-1695, polysorbate 20, polysorbate 80 등 4종의 유화제에서 생육억제환을 생성하였다. L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제를 25, 50, 100, 200 mg/mL의 농도에서 항균활성을 검색한 결과, 농도가 작아질수록 생육억제환의 크기도 줄어들었으며, 유화제 중 L-1695 샘플이 200 mg/mL에서 가장 큰 생육억제환을 생성하였다. pH 및 열에 대해 안정성을 측정한 결과 L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제 모두 pH 및 열에 안정성을 가지고 있다는 것을 확인하였다. 최소저해농도를 측정한 결과 다른 유화제 L-7D, polysorbate 20, polysorbate 80 샘플과 비교하였을때 L-1695 샘플이 1.56 mg/mL에서 가장 좋은 최소저해농도를 나타냈다. 최소살균 효과는 L-7D, L-1695, polysorbate 20, polysorbate 80 4종의 유화제 모두 나타나지 않았다. 접촉표면의 부착제어능력을 확인하기 위해서 stainless steel과 ceramic에서 실험한 결과, 두 접촉 표면 모두에서 L-1695 샘플 처리 시 가장 적은 생균수를 나타냈다. 앞선 실험의 종합적인 결과에 따라 L-1695 유화제를 최종적으로 선별하고, 계육 피부에 부착된 C. jejuni에 영향을 주는지 CLSM으로 분석한 결과 대조구에 비하여 conventional spray 및 electrostatic spray를 처리하였을 때 모공에 부착된 균이 대다 수 떨어졌음을 확인하였다. 그러나 생균수를 확인해 본 결과 conventional spray와 electrostatic spray 처리 시에는 유의한 차이가 나타나지 않았다. 위 결과들을 종합한 결과 C. jejuni KCTC 5327에 대하여 L-1695 유화제는 생육을 억제시키지만, 살균효과는 없는 것을 확인하였다. 그러나 L-1695 유화제는 식품접촉표면에서 캠필로박터균의 부착을 저해하는 특성을 갖고 있으며, 계육 피부에 인위접종된 C. jejuni를 효과적으로 감소시키는 것을 볼 때, 실제 도계공정에서 세척수에 포함시켜 C. jejuni의 제어에 사용될 수 있을 것으로 기대된다.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.472-477
• /
• 2016

Microstructure evolutions of thermosetting resin coating layers fabricated by electrostatic spray deposition (ESD) at various processing conditions were investigated. Two different typical polymer systems, a thermosetting phenol-formaldehyde resin and a thermoplastic polyvinylpyrrolidone (PVP), were employed for a comparative study. Precursor solutions of the phenol-formaldehyde resin and of the PVP were electro-sprayed on heated silicon substrates. Fundamental differences in the thermomechanical properties of the polymers resulted in distinct ways of microstructure evolution of the electro-sprayed polymer films. For the thermosetting polymer, phenol-formaldehyde resin, vertically aligned micro-rod structures developed when it was deposited by ESD under controlled processing conditions. Through extensive microstructure and thermal analyses, it was found that the vertically aligned micro-rod structures of phenol-formaldehyde resin were formed as a result of the rheological behavior of the thermosetting phenol-formaldehyde resin and the preferential landing phenomenon of the ESD method.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.2.1-2.1
• /
• 2011

Electrospray deposition (ESD) technique is fast finding its applicability in the field of thin film device manufacturing processes and the ease and cost efficiency attached to ESD process with possible integration with batch manufacturing technologies is the potential future of thin film device manufacturing. As the name suggests, the deposition phenomenon should solely be a spray achieved through electrostatic forces. In fact it is an imbalance between the surface forces arising because of the surface tension of the liquid to be sprayed and Maxwell stresses which are induced because of the electric field, that pull the liquid downwards from the capillary into a stable jet which further disintegrates into smaller droplets because of coulomb forces and hence a cloud of charged, mono-dispersed and extremely diminutive (sometimes up to femtolitres) droplets is achieved. The present talk is going to be exclusively about the electrospray process concepts, generation and possible applications.

• 한국유체기계학회 논문집
• /
• 제7권6호
• /
• pp.7-14
• /
• 2004

A new electrostatic rotary atomizing painting equipment using air turbine was developed for high transfer efficiency. Based on the overall design requirements of painting equipment, basic design specifications of the equipment parts such as air turbine and atomizing disk ate defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments. The comparison results show the present painting equipment is superior to the conventional ones in the aspects of transfer efficiency and coating surface characteristics.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.684-690
• /
• 2003

A new electrostatic rotary atomizing painting equipment using air turbine was developed. Based on the overall design requirements of painting equipment basic design specifications of the equipment parts such as air turbine and atomizing disk are defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.391-398
• /
• 1999

The spraying status of the electrostatic sprayer was evaluated by processing surface spraying images of the natural leaves. Water solution of the fluorescent material was used as a spray medium. The image of the lights reflected by fluorescent droplets was captured under UV light using a color CCD camera. Coverage rate, particle density, and the size distribution of particles were analyzed from the surface images of leaves under various spraying conditions such as spraying nozzle angle and object distance. Spraying characteristics of the electrostatic sprayer was evaluated in comparison with the conventional one. In a case of electrostatic sprayer, coverage rate and particle density increased by the average of 1.57times and 1.01times respectively under various nozzle angles and distances. The number of particle under the diameter of 50 ${\mu}{\textrm}{m}$ also increased significantly.

• 한국분무공학회지
• /
• 제5권3호
• /
• pp.45-54
• /
• 2000

A novel electrostatic splaying method for solidifying a galvanized coating layer was studied. Our experimental results and computer simulations showed that electric field could assist the fine droplets to attach on the steel surface and change the sprayed droplets trajectory especially in the space near the steel surface. It was necessary to apply the electric voltage higher than - 20 kV to obtain the enough electrostatic attraction force between droplets and the steel sheet.