• Journal of Platform Technology
• /
• 제11권3호
• /
• pp.68-75
• /
• 2023

본 논문은 110V 이하의 낮은 직류 및 교류전원을 이용하여 보리종자의 발아율을 높이는 방법에 관한 것이다. 여기서 사용된 실험장치는 평행평판이며, 정전기장의 크기를 키우기 위하여 평판의 밑면을 위면 크기보다 더 넓도록 설계하였다. 결과적으로 평판에 공급된 정전기장의 크기는 3종류로 첫 번째 400V/cm에서 600V/cm까지, 두 번째 600V/cm에서 900V/cm까지, 그리고 세 번째 2200V/cm에서 2400V/cm까지 만들었다. 평행평판의 내부에서 정전기장을 해석하기 위한 방법으로 유한차분법을 적용하였다. 본 논문에서 실험에 사용된 식물종자는 국내에서 생산된 보리종자를 사용하였다. 본 논문에서 제시된 정전기장을 이용한 보리종자의 평균 발아율은 57%이고, 2.45GHz의 마이크로파를 이용한 경우는 65%이며, 대조군의 경우는 31%의 결과가 나왔다. 정전기장을 이용한 경우와 2.45GHz의 마이크로파를 이용한 경우의 중요한 차이점은 건식방법과 습식방법이다. 이 두 방법을 실질적인 종자발아에 적용할 경우는 각각 실험방법의 장단점을 고려하여 적합한 방식을 선택해야 한다.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.29-34
• /
• 2002

Two charging methods of electrostatic nozzle, i.e. induction and ionized field corona charging, were designed and evaluated for orchard sprayer application. An artificial (metallic) target was constructed and used in this experiment. The charge-to-mass ratio for the induction electrode was measured by using the Faraday cage. Two conventional pressure-swirl nozzles have been employed with different orifice diameters under the same experimental operating conditions. A commercial pressure-swirl nozzle with orifice diameter of 1.0 was used for the conventional spray. The diameter of the electrostatic was 0.59 mm. The experiment was carried out for individual nozzle sprays at $0^{\circ}$, $20^{\circ}$ and $50^{\circ}$ oriented angles and three nozzles, sprayed simultaneously at a distance of 1.0 and 2.0 m from the nozzle tip to the target. The nozzles were mounted on a carriage with constant speed of 1.26 km/h with a blower attached. The weighing method was employed to evaluate for the spray deposition, ground loss and estimated drift. The results show more promising for the induction charging method, especially at $20^{\circ}$oriented angle at a distance of 1.0 m from the target for a single nozzle and when all three nozzles were operated simultaneously for spray deposition. The results of the induction charging method show promising with the developed electrostatic technique.

• 대한전자공학회논문지SD
• /
• 제42권12호
• /
• pp.9-12
• /
• 2005

본 연구는 물리전지의 하나로서 정전기 전지를 제안한 것으로 정전기를 활용한 전지의 제작 가능성을 정전기 전지의 구조제안, 동작원리에 대한 설명 및 특성변수의 계산을 통해 제시하였다. 구체적으로는 소자 외부에서 정전발전기를 통해 발생시킨 전하를 PN접합의 SCR내에 주입하고 SCR내의 내부전계를 이용하여 주입된 전하를 이동시켜 전지의 역할을 할 수 있도록 한 것이다. 계산 결과, 정전기 전지 소자의 단면적을 $0.0001cm^2$로 하고 정전발전기를 이용하여 발생시킨 약 $10^{11}$개의 전하를 주입했을 때, 0.15mA의 전류가 발생하여 전지로서의 가능성이 있음을 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권2호
• /
• pp.121-127
• /
• 2008

This paper presents design and fabrication of optimized geometry structure of electrostatic inkjet head. In order to verify effect of geometry shape, we simulate electric field intensity according to the head structure. The electric field strength increases linearly with increasing height of the micro nozzle. As the nozzle diameter decreases, the electric field along the periphery of the meniscus can be more concentrated. We design and fabricate the electrostatic inkjet heads, hole type and pole type, with optimized structure. It was fabricated using thick-thermal oxidation and silicon micromachining technique such as the deep reactive ion etching (DRIE) and chemical wet etching process. It is verified experimentally that the use of the MEMS inkjet head allows a stable and sustainable micro-dripping mode of droplet ejection. A stable micro dripping mode of ejection is observed under the voltages 2.5 kV and droplet diameter is $10\;{\mu}m$.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.27-31
• /
• 2010

It is a well known fact that the LCD and Semiconductor Devices are a central part of IT industry which is important in the present and the future. But the biggest problem of Semiconductor and LCD manufacturing is maintaining a cleaning room environment. For this reason, the soft X-ray type Ionizer was used as the electrostatic reducer device, which protects damage of the product against electrostatic discharge in the manufacturing process. Therefore it is a essential important factor during Semiconductor and LCD production process. But the soft X-ray has a intrinsic problem with harmful to human being in case of soft X-ray exposure. That's reason we have the research to solve above problem and made an apparatus that it was covered with shielding structure to protect X-ray radiation to outside. And besides, it has a possibility to eliminate the charged electrostatic in the narrow space through the slot for Ion emissions with dual soft X-ray sources on the both side. It is also not make the particles from itself when it has been operated.

• 대한기계학회논문집B
• /
• 제24권4호
• /
• pp.526-532
• /
• 2000

Recent studies have been directed toward obtaining a better understanding of the application of electrostatic precipitators to collect fly ash particles produced in a coal-fired power plant. Electrical resistivity can be described as the resistance of the collected dust layer to the flow of electrical current and is an important property for the collection efficiency in the electrostatic precipitator. In this paper, fly ash resistivity as a function of temperature up to $450^{\circ}C$ has been experimentally investigated using the resistivity meter consisted of the movable electrode, dust cup, and furnace. Resistivity was found to increase with increased temperature up to $200^{\circ}C$ due to the reduction of water concentration and then gradually decrease with increased temperature due to the activation of electrons. As the resistivity of fly ash in the flue gas temperature of $150^{\circ}C$ was measured >$10^{10}$ ohm cm, the efficiency of fly ash removal in the electrostatic precipitator might be expected to be low due to back-corona phenomenon. Flue gas conditioning in the electrostatic precipitator to reduce the resistivity of fly ash as required.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.179-189
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated f3r the purpose of an application to PSD (Probe-based Storage Device). However, all of the components (platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficiencies such as a few percentage, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having a large areal efficiency of about 25%. For obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design and analysis, the fabrication and measurement results. Experimental results show that the driving ranges of the fabricated stage along the x and y axis were 27$\mu$m, 38$\mu$m at the supplied voltages of 65V, 70V, respectively and the natural frequencies along x and y axis were 180Hz, 310Hz, respectively. The total size of the stage is about 5.9$\times$6.8mm$^2$ and the platform size is about 2.7$\times$3.6mm$^2$.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.56-62
• /
• 2015

Using an optical 3D scanning device to collect data from a diffused reflection surface is very difficult. To solve this problem, there are many applications including a spray-type developer and silicon molds. However, using a developer can cause chemical reactions between objects and particles of the developer and uneven surfaces on the object. To overcome these problems, we suggest an electrostatic powder coating method for even coating of particles onto surfaces for collecting 3D shape data. We have developed an automatic, electrostatic powder-coating machine and performed three different experiments to compare this system with a laser interferometer and a T-scan 3D scanner. As a result, we could ascertain the various characteristics of this new method, including good sensitivity for the various surface states of the bare surface, developer, and electrostatic powder coating. Finally, we verified the outstanding scanning performance and were able to demonstrate that this method achieves quality than traditional methods.

• 자원리싸이클링
• /
• 제13권1호
• /
• pp.39-46
• /
• 2004

마찰대전을 이용한 정전분리는 서로 상이한 물질간의 마찰을 통해 서로 다른 극성으로 하전시켜 이를 전기장내에 통과시켜 분리하는 기술이며, 플라스틱과 같은 부도체입자들의 정전분리에 많이 사용된다. 본 연구에서는 연속식 드럼형 마찰대전장치를 개발하고 이를 폐건축 및 폐가전 플라스틱의분리에 적용시켰다 분리대상 플라스틱은 폐건축 자재의 경우 PE/PVC 혼합시료를 대상으로 하였으며, 폐가전의 경우 ABS/PS/PP의 혼합시료를 대상으로 하였다. 건축자재 혼합플라스틱 및 가전제품 혼합플라스틱 모두 드럼형 마찰대전장치를 이용할 경우 실험한 조건에서 무게기준으로 95%이상의 순도조건에서 95%이상의 회수율을 보였다.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.75-80
• /
• 2006

This paper introduces the mechanism of the ESD(electrostatic discharge) in the HDD spindle system using FDBs(fluid dynamic bearings). When a HDD(hard disk drive) spindle system is rotating, triboelectric charging occurs in the FDBs through the friction between the lubricant and the rotating shaft or between the lubricant and stationary sleeve. And this electrostatic charge is accumulated in the rotating parts of the HDD spindle system because they are insulated from the ground by the lubricant. This research shows experimentally that the behavior of electric charge and discharge in the FDB spindle system is the same as that of a capacitor. It also measures the electrostatic voltage difference between the rotating and stationary parts in the FDB spindle system due to the change of humidity, supporting load and motor speed. This research shows that the control of ESD is required in the HDD spindle system using FDBs, because the electrostatic charge accumulated in the FDB spindle system may cause the breakdown damage of the GMR head and data loss consequently.