• Journal of Arbitration Studies
• /
• v.18 no.2
• /
• pp.173-199
• /
• 2008

A letter of credit transaction of the preexistence have been raising one's head fraud charge problem as a result of abusing the principles of independence and abstraction. Every society has certain rules and conventions which it regards as important and most of people in any society. The paper document means a document in a traditional paper form. The eUCP credit must specify the formats in which electronic records are to be presented. In these present times, the issuance of documentary credit are performed by the SWIFT(Society for Worldwide Inter bank Financial Telecommunication) system. The eUCP have been written to allow for presentation completely electronically or for a mixture of paper documents and electronic presentation. Presentation is deemed not to have been made if the Beneficiary's notice is not received. An electronic record that cannot be authenticated is deemed not to have been presented. The e-UCP is the supplement of current existing UCP but is superior to UCP under some circumstances. The document shall include an electronic record. The place for presentation of electronic records means an electronic address. The current e-UCP is not clear on this matter. We have to note followings in case of presenting the documents electronically and applying the e-UCP. There are three principles in the letter of credit transaction, that is to say, independence and abstraction, document dealing, strict compliance. IN the electronic letter of credit, these principles are called as independence and abstraction, electronic document dealing, strict compliance.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.416-424
• /
• 2004

In this paper, the heat transfer analysis and thermal stress analysis of the PCB(Printed Circuit Board) equipped in electronic Packages are carried out for various may types of chips on the PCB. And two structural PCB models are used in the analyses. The electronic chips on the PCB usually emit heat and this heat generates the thermal stress around the chip. The thermal load due to the heat generation of chips on the PCB may cause the malfunction of the electronic packages such as a monitor. a computer etc. Hence, the PCB should be designed to withstand these thermal loads. In this paper, the heat transfer analysis and thermal stress analysis are executed for the PCB model with pins and the analysis results are compared with the results for the PCB model without pins. The analysis results show that the PCB model without pins is not good for the thermal stress analysis of PCB, even though these two models have similar heat transfer characteristics. The analysis results also show that the highest thermal stress occurs in the pin especially attached to the highest temperature chip, and the PCB constrained to the electronic package on the long side is structurally more stable than other cases. The analyses of the PCB are executed using the finite element analysis code, NISA.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.5
• /
• pp.39-48
• /
• 2002

long with the rapid spread of the Internet, a new class of commercial applications which process transactions with respect to electronic dictionaries become popular Typical examples are Internet search engines. In this paper, we present a new approach to achieving high performance electronic dictionaries. Different from the conventional approach which use Trie data structures for the implementation of electronic dictionaries, our approach used multi-dimensional binary trees. In this paper, we present the implementation of our electronic dictionary ED-MBT(Electronic Dictionary based on Multidimensional Binary Tree). Exhaustive performance study is also presented to assess the performance impact of ED-MBT on the real world applications.

• Korean Management Science Review
• /
• v.18 no.1
• /
• pp.69-78
• /
• 2001

An electronic micropayment system, one of electronic payment systems, is suitable especially when a small amount of money is to be paid frequently in order to purchase on-line goods (i.e. database search, software distribution, electronic news service, etc). In addition, since the amount of payment is small, possible damages caused by system failures are lower than other payment system. In this paper, a micropayment protocol in electronic commerce environments on the Internet is proposed, based on the PayWord system. And a micropayment electronic commerce system which executes the protocol proposed is implemented. Unlike the PayWord system, however, the micropayment protocol proposed in this paper is designed in such a way that a merchant does not need to request a payment at the end of every business day since a customer cannot purchase goods beyond length of hash chains, which is specified on a certificate. In addition, the system is able to check the validity as well as the duplicate spending of hash chains. The electronic micropayment system with the proposed protocol is consists of Customers, Merchants, and Brokers. Customers are implemented on Windows NT 4.0 using VC++. Merchants are implemented on Solaris 2.5.1 and gcc 2.8.0 using Netscape Web Server and CGI Methods. HP UX 10.20 is used for Brokers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.453-458
• /
• 2015

We presented a quad-rotor controlling algorithm design by using sensor fusion in this paper. The controller design technique was performed by a PD controller with a Kalman filter and compensation algorithm for increasing the stability and reliability of the quad-rotor attitude. In this paper, we propose an attitude estimation algorithm for quad-rotor based sensor fusion by using the Kalman filter. For this reason, firstly, we studied the platform configuration and principle of the quad-rotor. Secondly, the bias errors of a gyro sensor, acceleration and geomagnetic sensor are compensated. The measured values of each sensor are then fused via a Kalman filter. Finally, the performance of the proposed algorithm is evaluated through experimental data of attitude estimation. As a result, the proposed sensor fusion algorithm showed superior attitude estimation performance, and also proved that robust attitude estimation is possible even in disturbance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.231-236
• /
• 2016

A three-electrode type reflective display (electronic paper) is designed to apply an independent electric field to each three electrodes of the cell including two electric-type of particles and electrically neutral color fluid, so single color realization is possible. In particular, the movement of particles and optical properties are decided by the electric field between two electrodes on the lower substrate. So, the effect of electric field by the distance between two electrodes on the lower substrate is studied with electrode spacing with $10{\mu}m$, $15{\mu}m$, $20{\mu}m$, and $25{\mu}m$. By our experimentation, the driving voltage induces more reliable movement of charged particles and the optical properties as compared with the threshold voltage. We ascertain the single color realization and non-inverted particle separation is possible. So the more desirable optical properties are observed in case of the short electrode like $10{\mu}m$.

• The Journal of Korean Association of Computer Education
• /
• v.7 no.4
• /
• pp.61-66
• /
• 2004

Electronic commerce that use Mobile Phone according as the radio Internet develops rapidly and performance of Mobile Phone develops is activated. It is said that electronic commerce that use these Mobile Phone is M-Commerce. Also, the most important controversial point is data security or an user certification technology at these electronic commerce, there are research reactor WPKI and WTLS about this technology. However, when transmit message again after sign electronic documents in Mobile Phone, if do not encrypt, danger exists to be exposed to outside. Therefore, in this paper, designed system to encipher document that handle and handles user certification applying XML electronic sign technique in Mobile environment. Prevent of XML electronic sign in Mobile environment through this paper, and can stave off danger from outside by enciphering electronic sign document.

• International journal of advanced smart convergence
• /
• v.9 no.4
• /
• pp.62-73
• /
• 2020

In this paper, we present electronic acupuncture needles we have developed using intelligence technology based on Bluetooth in order to allow anyone to simply receive customized remote diagnosis and treatment by clicking on the menu of the smartphone regardless of time and place. In order to determine the health condition and disease of patients, we have developed a software and a hardware of electronic acupuncture needles, operating on Bluetooth which transmits biometric data to oriental medical doctors using the functions of automatically determining pulse diagnosis, tongue diagnosis, and oxygen saturation; the functions are most commonly used in herbal treatment. In addition, using fuzzy logic and reasoning based on smartphones, we present in this paper an algorithm and the results of completion of hardware implementation for electronic acupuncture needles, appropriate for the body conditions of patients; the algorithm and the hardware implementation are for a treatment time duration by electronic acupuncture needles, an automatic determinations of pulse diagnosis, tongue diagnosis, and oxygen saturation, a function implementation for automatic display of acupuncture point, and a strength adjustment of electronic acupuncture needles. As a result of our simulation, we have shown that the treatment of patients, performed using an Electronic Acupuncture Needles based on intelligence, is more efficient compared to the treatment that was performed before.

• Journal of Broadcast Engineering
• /
• v.25 no.7
• /
• pp.1095-1106
• /
• 2020

In this paper, we propose an algorithm that extracts a high-precision 3D skeleton using a model generated using a distributed RGB-D camera. When information about a 3D model is extracted through a distributed RGB-D camera, if the information of the 3D model is used, a skeleton with higher precision can be obtained. In this paper, in order to improve the precision of the 2D skeleton, we find the conditions to obtain the 2D skeleton well using the PCA. Through this, high-quality 2D skeletons are obtained, and high-precision 3D skeletons are extracted by combining the information of the 2D skeletons. Even though this process goes through, the generated skeleton may have errors, so we propose an algorithm that removes these errors by using the information of the 3D model. We were able to extract very high accuracy skeletons using the proposed method.

• Journal of Korea Trade
• /
• v.24 no.2
• /
• pp.31-52
• /
• 2020

Purpose - This study mainly investigates two potential legal regimes expected to govern the use of electronic bills of lading: the Rotterdam Rules (2009) and the UNCITRAL Model Law on Electronic Transferable Records (2017). Widespread use of electronic bills of lading has been unsuccessful partly due to the absence of a uniform legal regime and protracted uncertainties. This paper aims to carry out an assessment of the possibilities where either of two potential legal regimes could provide certainty to the effect and validity of the use of electronic bills of lading, and contribute to the facilitation of electronically transferring the rights to goods carried by sea. Design/methodology - This paper first introduces two legal instruments and the relevance to electronic bills of lading. Since neither of these legal instruments has yet entered into force, the following section looks into the ratification or enactment possibilities based on a literature review and track records of the past legal regimes of the same kind. Assessment of the different adoption possibilities further requires comparative work of the two legal instruments, which will be based on an analysis of relevant provisions and a literature review. The literature review on the Rotterdam Rules delves into various studies and data produced since the UNCITRAL's adoption in 2009. The literature review on the UNCITRAL Model Law on Electronic Transferable Records heavily relies on UNCITRAL working group documents from 2011 to 2017 together with the final explanatory note. Findings - The main findings can be summarized as follows. Application of the Rotterdam Rules would negate the role of the UNCITRAL Model Law on Electronic Transferable Records assisting in the implementation of the Rotterdam Rules due to some conflicting issues. Enactment of the UNCITRAL Model Law alone can sufficiently provide a higher level of certainty in the use and effect of electronic bills of lading so long as lawmakers and parties are aware of some issues with the application. What concerns potential users most is the extension of the status quo, where neither of the legal instruments have any effect. It is necessary to take a number of alternatives into consideration, such as promotion of standard clauses and confirmation by a court ruling. Originality/value - Existing studies focus either on the Rotterdam Rules or on the UNCITRAL Model Law, but not both. Not many papers have yet dealt with the Model Law, which was adopted by UNCITRAL only 2 years ago, particularly in the context of a potential legal regime for electronic bills of lading. This paper attempts to introduce the differences between the two legal instruments in regulating the use of electronic bills of lading while providing an assessment of the various possibilities for which parties involved in international trade can be better prepared for the changing legal environment.