• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.225-232
• /
• 2017

Recently, the development of digital transmission technology of audio signals and the introduction of audio network equipment using digital transmission technology have been made. As a result, audio network technology and equipment are actively applied to the design and construction of audio systems. The meeting room is a place where a large number of participants exchange opinions and communicate with each other. In addition to using an electric acoustic device such as a microphone and a speaker, it improves the intelligibility of the conference room through an example using an audio network.

• Journal of Broadcast Engineering
• /
• v.14 no.2
• /
• pp.178-188
• /
• 2009

In this paper, we propose the method which provides efficient sub-channel allocation for handoff and new call supporting multi-media service in AMC-based OFDMA system. Firstly, we apply the multi-band method which provides different AMC method according to the location of user terminals. Also, in OFDMA system environment that a base station has a lot of sub-channels, we adopt the sub-channel allocation scheme that provides a higher priority to handoff call and real-time service about handoff and new calls with multi-meida service. The simulation results show that the proposed scheme plays a role in increasing the number of new and handoff calls meeting the required blocking rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1087-1094
• /
• 2023

Due to the development of technologies, such as big data, cloud, IoT, and AI, The high data throughput is required, and the importance of network flexibility and scalability is increasing. However, existing network systems are dependent on vendors and equipment, and thus have limitations in meeting the foregoing needs. Accordingly, SDN technology that can configure a software-centered flexible network is attracting attention. In particular, a load balancing method based on SDN can efficiently process massive traffic and optimize network performance. In the existing load balancing studies in SDN environment have limitation in that unnecessary traffic occurs between servers and controllers or performing load balancing only after the server reaches an overload state. In order to solve this problem, this paper proposes a method that minimizes unnecessary traffic and appropriate load balancing can be performed before the server becomes overloaded through a method of assigning weights to servers in stages according to server load.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.251-291
• /
• 2009

Due to the trend toward computerization of business services in public sector and the push for e-government, the volume of records that are produced in electronic system and the types of records vary as well. Of those types, dataset is attracting everyone's attention because it is rapidly being supplied. Even though the administrative information system stipulated as an electronic record production system is increasing in number, as it is in blind spot for records management, the system can be superannuated or the records can be lost in case new system is developed. In addition, the system was designed not considering records management, it is managed in an unsatisfactory state because of not meeting the features and quality requirements as records management system. In the advanced countries, they recognized the importance of dataset and then managed the archives for dataset and carried out the project on management systems and a preservation formats for keeping data. Korea also is carrying out the researches on an dataset and individual administrative information systems, but the official scheme has not been established yet. In this study the items for managing archives which should be reflected when the administrative information system is designed was offered in two respects - an identification method and a quality requirement. The major directions for this system are as follows. First, as the dataset is a kind of an electronic record, it is necessary to reflect this factor from the design step prior to production. Second, the system should be established integrating the strategy for records management to the information strategy for the whole organization. In this study, based on such two directions the strategies to establish the identification for dataset in a frame to push e-government were suggested. The problem on the archiving steps including preservation format and the management procedures in dataset archive does not included in the research contents. In line with this, more researches on those contents as well as a variety of researches on dataset are expected to be more actively conducted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.582-588
• /
• 2014

IMO and IALA have undertaken projects that GMDSS Modernization and E-navigation, which refer to "Future digital communications systems" for a more efficient transmission of voice and data communications in the VHF maritime mobile service. ITU has also resolved in WRC-07 Resolution 357 to study the use of spectrum-efficient technologies in order to provide for the operation of ship and port security and maritime safety systems. IALA and ITU WP5B have coordinated for the technical developments and the spectrum issues. Recommendation ITU-R M.1842-1 has approved by WP5B meeting. This revision provides a wideband data service both 50kHz and 100kHz in the VHF maritime mobile service. This paper has studied E-navigation, its needs for data exchange that includes explanations of the current methods for transmitting data by VHF that based in land mobile radio service. A further technologies trend is estimated for Recommendation ITU-R M.1842-1, that is based on the land mobile radio standards with some tailored to fit the needs of the maritime mobile service.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.555-562
• /
• 2022

This study measured and analyzed the propagation characteristics at frequencies 6, 10, and 17 GHz to discover the new propagation demands in a semi-basement indoor corridor environment for meeting the 4th industrial revolution requirements. The measured indoor environment is a straight corridor consisting of three lecture rooms and glass windows on the outside. The measurement scenario development and measurement system were constructed to match this environment. The transmitting antenna was fixed, and the frequency domain and time domain propagation characteristics were measured and analyzed in the line-of-sight environment based on the distance of the receiving antenna location. In the frequency domain, reliability was determined by the parameters of the floating intercept (FI) path loss model and an R-squared value of 0.5 or more. In the time domain, the root mean square (RMS) delay spread and the cumulative probability of K-factor were used to determine that 6 GHz had high propagation power and 17 GHz had low propagation power. These research results will be effective in providing ultra-connection and ultra-delay artificial intelligence services for WIFI 6, 5G, and future systems in a semi-basement indoor corridor environment.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2013

The e-navigation has been being developed in IMO is a sort of strategy to provide user-oriented services for safe navigation and environmental protection based on the architecture and its related services complying with the user needs. At NAV $57^{th}$ meeting in 2011, the overarching e-navigation architecture was approved which represent overall relationship only between onboard and ashore elements, so more detail technical architecture for each element should be developed for implementation in view of services and systems. Considering the continuous and iterative verification of e-navigation development process required by IMO, the relationship and traceability should be took in consideration between the outcome of e-navigation process and the element of the architecture. In this paper, we have surveyed literarily the user needs, result of gap analysis and practical solutions to address them and defined the architecture elements and their relationship considering the three kinds of views of DoDAF(Architecture Framework) of US department of Defence, in result, proposed the e-navigation shipboard technical architecture.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.