• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.436-437
• /
• 2007

Organic light-emitting diodes (OLEDs) were fabricated with the electron dominant complex, 4,7-diphenyl-1, 10-phenanthroline (Bphen) into the traditional electron transporting material of tris (S-hydroxyquinoline) aluminum $(Alq_3)$, neat $Alq_3$ and Bphen as electron-transporting layers (ETLs), respectively. Use of the Bphen material results in efficient electron injection and transport, allowing for high luminous efficiency devices. The devices with neat $Alq_3$(Device1), 1:1 mixed $Alq_3$ : Bphen(Device2), and Bphen(Device3) have efficiency of 15.3cd/A, 16.9cd/A, 20.9cd/A, respectively, at $20\;mA/cm^2$. The efficiency characteristic of device with Bphen is best, but the device that is satisfied high efficiency and stability at once is observed in Device2.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.670-674
• /
• 2012

The photovoltaic performance of solid-state dye-sensitized solar cells employing hole transport material (HTM), 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene (spiro-MeOTAD), has been investigated in terms of HTM overlayer thickness. Two important parameters, soak time and spin-coating rate, are varied to control the HTM thickness. Decrease in the period of loading the spiro-MeOTAD solution on $TiO_2$ layer (soak time) leads to decrease in the HTM overlayer thickness, whereas decrease in spin-coating rate increases the HTM overlayer thickness. Photocurrent density and fill factor increase with decreasing the overlayer thickness, whereas open-circuit voltage remains almost unchanged. The improved photocurrent density is mainly ascribed to the enhanced charge transport rate, associated with the improved charge collection efficiency. Among the studied HTM overlayer thicknesses, ca. 230 nm-thick HTM overlayer demonstrates best efficiency of 4.5% at AM 1.5G one sun light intensity.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.84-87
• /
• 2011

We fabricated phosphorescent organic light-emitting devices with a 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) host layer. Two kinds of devices, one of ITO/TAPC/TAPC:FIrpic/TAZ/LiF/Al (device A) and one of ITO/TAPC:FIrpic/TAPC/TAZ/LiF/Al (device B), were prepared to investigate electrical and optical properties. Iridium(III) bis[(4,6-difluorophenyl)-pyridinato-N,$C^{2'}$]picolinate (FIrpic) and 3-(4-biphenylyl)-4-phenyl-5-(4-tert-butylphenyl)-1,2,4-triazole (TAZ) were used as a blue phosphorescent guest material and an electron transport layer, respectively. The TAPC layer in device B strongly contributes to whitish emission, higher driving voltage, and lower current efficiency characteristics compared with device A. The mechanisms of these electrical and optical characteristics of the devices were investigated.

• Journal of Information Display
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2001

Four types of conjugated polymers, poly(MEHPV-PV), poly(MEHPV-BPV), poly(MEHPV-AV) and poly(PZV-AV) were synthesized by Homer-Emmons reaction using potassium tert-butoxide. The Homer-Emmons reaction gave electroluminescent(EL) copolymers in good yield. Of the EL copolymers synthesized, poly(PZV-AV) containing phenothiazinylene vinylene and anthrylene vinylene as repeat unit exhibited red color in the light emitting diode(LED) which was very close to the NTSC standard red. Besides, double layer LED made with $Alq_3$ electron transport layer exhibited both enhanced emission intensity and efficiency compared to the single layer LED.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1991.10a
• /
• pp.4-8
• /
• 1991

The characterization of pore properties (mean pore size and pore size distribution) of the active layer in a UF membrane is important not only in order to obtain information about the factors affecting pore formation during membrane manufacturing but also to understand deeply the mechanism of solute and solvent transport through pores. Many methods of characterizing quantitatively the pore properties of UF membranes have been suggested in the literature: solvent and gas flow measurement, bubble point determination, electron microscopy, gas adsorption/desorption measurement, rejection measurement etc. But most of these methods involve time-consuming procedures and involve some wellknown problems and uncertainties.

• Journal of Sensor Science and Technology
• /
• v.33 no.2
• /
• pp.117-117
• /
• 2024

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.12
• /
• pp.1139-1142
• /
• 2005

Recently, organic light emitting diodes(OLEDs) is widely used as one of the information display techniques. We synthesized 2-(2-hydroxyphenyl)benzoxazole($Zn(HPB)_2$). We studied the luminescent properties of OLEDs using $Zn(HPB)_2$. The ionization potential(IP) and the electron affinity(EA) of $Zn(HPB)_2$ investigated using cyclic-voltammetry(C-V). The IP and EA were 6.5 eV and 3.0 eV, respectively. The PL and EL spectra of $Zn(HPB)_2$ were observed at the wavelength of 450 nm. We used $Zn(HPB)_2$ as an emitting layer and hole blocking layer. At the experiment about hole blocking effect, we inserted $Zn(HPB)_2$ between emiting material layer(EML) and cathode, and between hole transport layer(HTL) and emitting material layer(EML). We measured current density-voltage and luminance-voltage characteristics at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.447-448
• /
• 2005

Recently, organic light emitting diodes(OLEDs) is widely used as one of the information display techniques. We synthesized 2-(2-hydroxyphenyl)benzoxazole($Zn(HPB)_2$). We studied the luminescent properties of OLEDs using $Zn(HPB)_2$. The ionization potential(IP) and the electron affinity(EA) of $Zn(HPB)_2$ investigated using cyclic-voltammetry(C-V). The JP, EA and Eg were 6.5eV, 3.0eV and 3.5eV, respectively. The PL and EL spectra of $Zn(HPB)_2$ were observed at the wavelength of 4S0nm. We used $Zn(HPB)_2$ as an emitting layer and hole blocking layer. At the experiment about hole blocking effect, we inserted $Zn(HPB)_2$ between emitting material layer(EML) and cathode, and hole transport layer(HTL) and emitting material layer(EML). We measured current density-voltage and luminance-voltage characteristics at room temperature.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.55-61
• /
• 1998

Organic light emitting devices from a single layer thin film with a hole transport polymer, poly(N-vinylcarbazole) (PVK) doped with 2-(4-bi phenyl)-5-(4-t-butyl-phenyl) -1,3,4-oxadiazole (Bu-PBD) as electron transporting molecules and Coumurine 6(C6), 1,1,4,4-tetraphenyl-1,3-butadiene (TPB), Rhodamine B as a emitter dye were fabricated. The sing1e layer structure and the use of soluble materials simplify the fabrication of devices by spin coating technique. The active layer consists of one polymer layer that is simply sandwiched between two electrodes, indium-tin oxide (ITO), and aluminum. In this structure, electron and hole inject from the electrodes to the PVK : Bu-PBD active layer. Respectively, Blue, green and orange colored emission spectrum by the use of TPB, C6, Rhodamine B dye emitted at 481nm, 500nm and 585nm were achieved during applied voltages. PVK materials can be useful as the host polymer to be molecularly doped with other organic dyes of the different luminescence colors. And EL color can be tuned to the full visible wavelength.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1712-1714
• /
• 2004

During the last 20 years organic semiconductors have attracted considerable attention due to their interesting physical properties followed by various technological applications in the area of electronics and opto-electronics. It has been a long time since organic solar cells were expected as a low-cost energy-conversion device. Although practical use of them has not been achieved, technological progress continues. Morphology of the materials, organic/inorganic interface, metal cathodes, molecular packing and structural properties of the donor and acceptor layers are essential for photovoltaic response. We have fabricated solar cell devices based on zinc-phthalocyanine(ZnPc) as donor(D) and fullerine($C_{60}$) as electron acceptor(A) with doped charge transport layers, $Alq_3$ as an electron transport or injection layer. We observed the photovoltaic characteristics of the solar cell devices using the Xe lamp as a light source.