• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.445-449
• /
• 1999

We studied the properties of the InAs epitaxial layers grown of (100)-oriented GaAs ($2^{\circ}$tilted toward[011]) by molecular beam epitaxy. From DCX (double-crystal x0ray), the better crystal quality was shown in InAs epitaxial layers on about 2500$\AA$ GaAs epitaxial layers on GaAs, we obtained the high mobility of InAs epitaxy in As/In BEP ratio (1.2~2.0) from Hall effect measurement. The electron mobility increased as electron concentration increases, until Si cell temperature $960^{\circ}C$$(N_D=2.21\times10^{-17}\textrm{cm}^{-3})$. The mobility decreases as the Si cell temperature increases, at the temperature over $960^{\circ}C$. We obtained the high mobility (1.10$\times$104cm2/V.s) at Si electron concentration of $N_D=2.21\times10^{-17}\textrm{cm}^{-3}$.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.223-228
• /
• 1996

$SiO_2$ insulator layers on InSb have been prepared by remote PECVD system a low temperature below $200^{\circ}C$. The effects of deposition pressure, temperature, and gas flow ratio on the physical and electrical characteristics of the $SiO_2$ were studied. The InSb MIS device using $SiO_2$ was fabricated and measured its current-voltage and capacitance-voltage characteritance-voltage charateristics at 77K. The films evaluated Auger electron spectroscopy showed that composition atoms were distributed uniformaly throughout the oxide film and the outdiffusion of substrate atoms into the oxide were few. The leakage current density of the MIS device was about 6.26nA/$\textrm{cm}^2$ at 0.75MV/cm , and the breakdown voltage was about 1MV/cm. The interface-stage density at mid-bandgap extracted from 1MHz C-V measurement was $54\times 10^{11}\textrm{cm}^2-2V^{-1}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.694-698
• /
• 2002

Ti films were deposited onto $100{\times}100$ mm alumina substrates using dc magnetron sputtering under the following conditions; substrate temperature of R.T. ${\sim}400^{\circ}C$, annealing temperature of $100{\sim}400^{\circ}C$ and sputtering gas pressure of $1.3{\sim}3.0{\times}10^{-2}$ Torr. And the films were examined by X-ray diffraction analysis (XRD), scanning electron microscopy(SEM) and 4-point measurement system. The best electrical and structural properties obtained by substrate temperature of ${\sim}200^{\circ}C$, target-substrate distance of ~14 cm and sputtering pressure of $1.3{\sim}1.7{\times}10^{-2}$ Torr. Also at that condition the most excellent adhesion was observed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.533-538
• /
• 2001

The barrier height is found to increase from 0.25 to 0.690 eV for Schottky contacts on n-InGaAs using deposition of Ag on a substrate cooled to 77K(LT). Surface analysis leads to an interface model for the LT diode in which there are oxide compounds of In:O and As:O between the metal and semiconductor, leading to behavior as a metal-insulator-semiconductor diode. The metal film deposited t LT has a finer and more uniform structure, as revealed by scanning electron microscopy and in situ metal layer resistance measurement. This increased uniformity is an additional reason for the barrier height improvement. In contrast, the diodes formed at room temperature exhibit poorer performance due to an unpassivated surface and non-uniform metal coverage on a microscopic level.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2012

Al doped ZnO (AZO) thin film was deposited by using Facing Target Sputtering (FTS) system. This work examined the properties of AZO thin film as a function of the substrate temperature. The sputtering targets were 4 inch diameter disks of AZO (ZnO : $Al_2O_3$ = 98 : 2 wt.% ). The properties of electrical, structural and optical were investigated by 4-point probe, Hall effect measurement, x-ray diffractometer (XRD), field-emitting scanning electron microscopy (FE-SEM), and UV/VIS spectrometer. The lowest resistivity of films was $5.67{\times}10^{-4}{\Omega}.cm$ and the average optical transmittance of the films was above 85% in the visible range.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.1
• /
• pp.112-115
• /
• 2017

ITO thin films were grown on the glass substrate under various oxygen gas flow and substrate temperature by using FTS (Facing Target Sputtering) system. To investigate properties of as-prepared films for transparent electrical devices, we employed four-point probe, UV-VIS spectrometer, X-ray diffractometer (XRD), scanning electron microscopy (SEM), Hall Effect measurement system and Atomic Force Microscope (AFM). As a results, all of prepared samples has high transmittance of over 80 % in the visible range (300-800 nm). Their resistivity increased as a function of oxygen gas flow and substrate temperature due to their crystal structure and oxygen defect in the films. As-prepared films have a resistivity of under $10^{-4}({\Omega}-cm)$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.753-758
• /
• 2003

Ti films were deposited onto 100${\times}$100 mm alumina substrates using dc magnetron sputtering under the following conditions; substrate temperature of R.T～400 $^{\circ}C$, annealing temperature of 100～400 $^{\circ}C$, and sputtering gas pressure of 4${\times}$10$^{-3}$ Torr～4${\times}$10$^{-2}$ Torr. And the films were examined by X-ray diffraction analysis (XRD), scanning electron microscopy(SEM) and 4-point measurement system. The best electrical and structural properties was obtained by substrate temperature of ～200 $^{\circ}C$, target-substrate distance of ～14 cm and sputtering pressure of ～1${\times}$10$^{-2}$ Torr. Also at that condition the most excellent adhesion was observed.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.5
• /
• pp.183-190
• /
• 2008

Recently, according to development of information-oriented society, internet application technology on electricity electron controled technology fields are diversified and the necessity of remote measurement by internet is gradually increased. In this paper, to meet in these necessity we design and implementation of remote measurement system using internet embedded module, which was developed for on-line measurement of various kinds of analogue data. This system is consisted of two parts greatly, hardware module for measurement and software module to control it. The advantage of this system is that users can acquisition the remote data of temperature and illumination etc. without extra serve pc easily. In order to test the validity of the proposed system, we examine the response and operating characteristic about several states. As a result of the test, we proved the effectiveness of it.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.333-340
• /
• 1996

The properties of TiN as a barrier against Cu diffusion ere studied by sheet resistance measurement, X-ray diffraction, scanning electron microscopy, Auger electron spectroscopy, and capacitance-voltage(C-V) measurement. The sensitivities of the various methods were compared. Specimens with Cu/TiN/Ti/SiO2/Si structure were prepared by various deposition techniques and annealed at various temperatures ranging from $500^{\circ}C$ to $800^{\circ}C$ in 10%H2/90%Ar ambient for hours. As the effectiveness of the barrier property of TiN against Cu diffusion was vanished, the irregular-shaped sports were observed and outdiffused Si were detected on the surface of the Cu thin film. The C-V characteristics of the MOS capacitors varied drastically with annealing temperatures. In C-V measurement, the inversion capacitance decreased at annealing temperature range from $500^{\circ}C$ to $700^{\circ}C$ and increased remarkably at $800^{\circ}C$. These variations may be due to the Cu diffusion through TiN into $SiO_2$ and Si.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.95-97
• /
• 2006

The electron spin resonance signals of $Bi_xCa_{1-x}MnO_3$ have been acquired for two samples of x=0.15 and 0.22. ESR signal of the sample of x=0.15 clearly shows signal shape change into Dysonian with g-value shift at around 165 K so that the charge ordering temperature can be identified. The general features of ESR signal of the two samples well correlate with magnetic susceptibility measurement and also confirm the validity of former investigations.