• 소성∙가공
• /
• 제23권7호
• /
• pp.431-438
• /
• 2014

For electromagnetic forming(EMF) the most important feature is a forming coil which creates the electromagnetic force(Lorentz force), using current density and a magnetic field. Most previous papers have concentrated on the final configuration of the blank or the efficiency of EMF process. Studies focused on the design parameters affected by the forming coil performance have not been conducted. In order to design a suitable forming coil for an object, the current study uses LS-DYNA EM-Module to not only optimize the coil but also to examine the effect of coil performance. By this method a suitable forming coil was made and tested to determine whether or not good formability was achieved in a free bulge test Numerical analysis was also used. The workpiece was Al 1100-O with a thickness of 1.27mm and the coil was made from copper CW004A, which has good electrical conductivity and is suitable for electrical components.

• Journal of Magnetics
• /
• 제20권1호
• /
• pp.69-78
• /
• 2015

This paper focuses on the design of a flux-biased rotary electromagnetic actuator with compact structure for fast steering mirror (FSM). The actuator has high force density and its torque output shows linear dependence on both excitation current and rotation angle. Benefiting from a new electromagnetic topology, no additional axial force is generated and an armature with small moment of inertia is achieved. To improve modeling accuracy, the actuator is modeled with flux leakage taken into account. In order to achieve an FSM with good performance, a design methodology is presented. The methodology aims to achieve a balance between torque output, torque density and required coil magnetomotive force. By using the design methodology, the actuator which will be used to drive our FSM is achieved. The finite element simulation results validate the design results, along with the concept design, magnetic analysis and torque output model.

• 한국철도학회논문집
• /
• 제19권3호
• /
• pp.324-330
• /
• 2016

전자접촉기는 전기 회로에 사용하는 개폐기 중 하나로 산업계 전반에 걸쳐서 폭 넓게 사용되고 있다. 이 전자접촉기의 구동부인 전자코일은 전기 회로를 개폐하는 역할을 맡고 있고 전자접촉기의 동작 성능에 중요한 역할을 한다. 이 논문은 유한요소법을 이용하여 실험데이터를 반영한 해석 모델을 구현하였으며 인가전압과 권선수의 변화에 대한 전자기력의 특성 확인을 통해 해석 모델을 검증하였다. 두 전자코일의 구동 코어와 고정 코어의 접촉부 변화에 따른 전자기력의 특성을 연구하였다. Push형 솔레노이드 구조의 전자코일에서 두 코어 접촉부의 기울기에 따른 구조의 전자기력 특성을 접촉부의 자속밀도 분포를 통해 해석하였다. 또한 접촉부 사이 air gap의 변화에 의한 구조가 자속밀도 분포에 미치는 영향을 파악하였다. 이를 통하여 전자코일의 코어 접촉면에 따른 전자기력의 특성을 연구하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.148-153
• /
• 2001

A computational investigation of the effect of the electromagnetic force(or Lorentz force) on the flow behavior around a circular cylinder, a typical model of bluff bodies, is conducted. Two-dimensional unsteady flow computation for $Re=10^2$ is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of the spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of the circular cylinder cross-flow, leading to the reduction of the drag.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.363-375
• /
• 2002

The effect of the electromagnetic force (or Lorentz force) on the flow behavior around a circular cylinder is investigated by computation. Two-dimensional unsteady flow computation for Re=10$^2$is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of circular cylinder cross-flow, leading to reduction of drag.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권5호
• /
• pp.221-227
• /
• 2002

This paper deals with the mechanical stress analysis due to electromagnetic forces and the optimal design of the link considering the stress. The link in Interior Permanent Magnet Brushless Motor(IPM) have influence on both mechanical and magnetic performance. The decrease of the link thickness serves to improve the torque, whereas this decreases the strength of link. Therefore, it is necessary to determine the appropriate link thickness considering electromagnetic forces and thermal expansion. The effects of the variation of link thickness on the mechanical stress and the electromagnetic performance are analyzed by the structural and electromagnetic Finite Element Method. In addition, the mechanical structure design of the link is performed to reinforce the mechanical strength against magnetic forces while preserving a food magnetic torque.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.48-57
• /
• 2003

This study presents nonlinear vibration of a cantilever beam subjected to electromagnetic forces. The dynamic responses of the beam show various nonlinear phenomena with the variation of the system parameters, such as the jump phenomenon, multiple solutions, and the movement of the natural frequency. In this study the nonlinear stiffness due to electromagnetic forces which depends on air gap size is measured experimentally, and the system is modeled by a single degree of freedom nonlinear dynamic system and solutions are solved numerically. The numerical results show good agreements with the experimental results, which demonstrate the nonlinearity of electromagnetic force. Finally the occurrences of the jump phenomenon and the first, second and fourth harmonic components are confirmed in using the method of multiple scales.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.104-111
• /
• 2003

Micro force measurement is required more frequently for a precision manufacturing and investment in fields of precision industries such as semiconductor, chemistry and biology, and so forth. Null balance method has been introduced as an alternative of a loadcell. Loadcells have advantages in aspects of low cost and easy manufacturing, but have also the limitation in resolution and sensitivity to environment variations. In this paper, null balance method is explained and the dominant parameters related to system performances are mentioned. Null position sensor, electromagnetic system and controller are investigated. Also, the characteristic experiment is carried out in order to estimate the resolution and the measurement range. In order to overcome the limitation by the drift of position sensor and the performance of controller, double electromagnetic force compensation method is proposed and experimented. After controlling and filtering, the resolution under $\pm$ 1mg and measurement range over 300g could be obtained.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.40-47
• /
• 1996

본 논문에서는 영전식 magnetic lifter의 최적 설계 방법을 제시하였다. 등가 자기회로법으로 흡착시와 탈착시의 자장 해석 및 전자역 계산을 행하였고, 최적 설계를 위해 등가 자기회로법으로 해석된 흡착시의 전자력을 최대로 하는 lifter의 치수를 구하였다. 또한 흡착시의 전자력을 제한 조건으로 하여 lifter 전체의 부피를 최소로 하는 치수를 찾았다. 위 최적 설계를 위한 최적화 알고리즘으로는 (1+1) Evolution Strategy(ES)를 이용하였다. 또한 상용 자장해석 프로그램(MAXWELL)을 사용하여 얻은 결과와 위의 최적화 결과를 비교하여 본 논문의 최적화방법의 타당성을 검증하였다.

• 한국자기학회지
• /
• 제26권6호
• /
• pp.206-212
• /
• 2016

대형 전동기에서 영구자석을 받치는 철제 받침대의 형상은 요크와의 결합력을 결정하는 매우 중요한 요소이다. 대형 전동기에서 받침대의 형상에 따라 요크와의 결합력 차이가 있다. 이 논문에서는 이중 받침대(Double bed)와 단일 받침대(Single bed)의 결합력을 가상공극 법을 통해 계산하여 차이점과 문제점을 제시하고 단일 받침대가 결합력 향상 측면에서 우위에 있음을 보여준다. 또한 받침대의 아래에 홈(Groove) 형상을 새김으로해서 받침대와 요크 간의 결합력이 향상됨을 보인다