• Current Applied Physics
• /
• 제18권11호
• /
• pp.1410-1414
• /
• 2018

Magnetic nanoparticles (MNP) have attracted considerable interest in many fields of research and applied science due to their impressive properties. In the past, especially biomedical problems have promoted the development of MNPs. For technical applications e.g. wastewater treatment and absorption of electromagnetic waves, the existing synthesis approaches are too expensive and/or the producible quantities are too low. In this work we present a method for simple preparation of size-controlled magnetic iron oxide nanoparticles by electroerosion dispersion (EED) of carbon steel in water. We describe the synthesis method, the laboratory installation and discuss the structural, chemical and electromagnetic properties of the synthetized EED powders as well as their applicability for microwave absorption compared to other available ferrite powders.

• 한국분말재료학회지
• /
• 제22권4호
• /
• pp.234-239
• /
• 2015

Electronic products are a major part of evolving industry and human life style; however most of them are known to emit electromagnetic waves that have severe health hazards. Therefore, different materials and fabrication techniques are understudy to control or limit transfer of such waves to human body. In this study, nanocomposite powder is dispersed into epoxy resin and shielding effects such as absorption, reflection, penetration and multiple reflections are investigated. In addition, nano size powder (Ni, $Fe_2O_3$, Fe-85Ni, C-Ni) is fabricated by pulsed wire evaporation method and dispersed manually into epoxy. Characterization techniques such as X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy are used to investigate the phase analysis, size and shape as well as dispersion trend of a nano powder on epoxy matrix. Shielding effect is measured by standard test method to investigate the electromagnetic shielding effectiveness of planar materials, ASTM D4935. At lower frequency, sample consisting nano-powder of Fe-85%Wt Ni shows better electromagnetic shielding effect compared to only epoxy, only Ni, $Fe_2O_3$ and C-Ni samples.

• 한국재료학회지
• /
• 제29권9호
• /
• pp.532-541
• /
• 2019

Information and communication technologies are developing rapidly as IC chip size becomes smaller and information processing becomes faster. With this development, digital circuit technology is being widely applied to mobile phones, wireless LANs, mobile terminals, and digital communications, in which high frequency range of GHz is used. In high-density electronic circuits, issues of noise and EMC(Electro-Magnetic Compatibility) arising from cross talk between interconnects or devices should be solved. In this study, sheet-type electromagnetic wave absorbers that cause electromagnetic wave attenuation are fabricated using composites based on soft magnetic metal powder and silicon rubber to solve the problem of electromagnetic waves generated in wireless communication products operating at the frequency range of 2.4 GHz. Sendust(Fe-Si-Al) and carbonyl iron(Fe-C) were used as soft magnetic metals, and their concentrations and sheet thicknesses were varied. Using soft magnetic metal powder, a sheet is fabricated to exhibit maximum electromagnetic attenuation in the target frequency band, and a value of 34.2dB(99.9 % absorption) is achieved at the target frequency.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.15-23
• /
• 2024

In order to avoid the high observability due to the cavity resonance or electromagnetic wave leakages from the bridge of a battleship or the cockpit of an aircraft, this paper presents a transparent conductive oxide coated structure to prevent the incoming/outgoing electromagnetic waves. Currently, most of the RCS reduction technologies were focused on radar absorbing material such as paints based on conductive or magnetic materials in the fuselage, and there is not much research on countermeasures for achieving the low observability of materials that required optical transparency in actual weapon systems. In this study, the transmission/reflection and absorption performance of the ITO coated structure according to the change of the surface resistance of the transparent conductor were analyzed. Finally, the relationship between the electromagnetic and optical characteristics was established through fabrication and measurement.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.363-369
• /
• 2016

탄소나노튜브와 그래핀 등으로 대표되는 탄소 동소체기반 나노재료의 우수한 기계적 특성을 이용해 콘크리트의 압축강도를 증가시키기 위한 연구가 활발히 진행되고 있다. 일반적으로, 나노재료 적용을 통한 강도 향상을 위해서는 콘크리트 내 나노재료의 분산성이 높아야 하며, 이를 검증하기 위해 외부에서 비파괴적으로 확인할 수 있는 검사 기술이 요구된다. 본 연구에서는, 적외선의 직진성과 마이크로파의 투과성을 동시에 갖고 있는 THz 전자기파를 이용하여 MWCNT 및 GO가 포함된 두 종류의 나노시멘트 모르타르 시편을 제작하여 굴절률 및 흡수율과 같은 기초 광학물성 측정 시험을 수행하였다. 시험을 통해 일반 시멘트 모르타르에 비해 나노재료가 포함된 시편에서 굴절률은 평균 1.0~2.5%, 흡수율은 평균 -14~28% 차이로 측정됨을 확인하였다. 이를 통해, 비파괴적으로 콘크리트 내부에 포함된 나노재료의 분포도를 영상화할 수 있는 기술의 실현 가능성을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제28권2호
• /
• pp.123-130
• /
• 2015

본 논문에서는 전자기파에 대한 수치적 파동흡수 경계모델인 Perfectly-Matched-Layer(PML)를 개발하고 PML을 연동시킨 유한요소법에 의해 콘크리트 구조물을 통과하는 마이크로파의 전파거동을 해석하는 수치적 기법을 제시한다. 콘크리트 부재와 공기로 구성된 무한매질을 PML을 경계로 하는 유한영역으로 치환하고, 이 유한영역에서 평면 전자기파에 대한 시간 영역 맥스웰방정식의 수치 해를 혼합유한요소법에 의해 계산하였다. 공기로만 이루어진 균일매질의 경우와 콘크리트 구조물이 존재하는 비균일 매질의 경우에 대하여 단일주파수 및 복합주파수를 갖는 마이크로파의 전기장을 계산하였고, 오차분석을 위해 $L^2$-놈 형태로 표현되는 정해와 수치 해의 상대오차를 정의하여 수치 해의 정확도를 평가하였다. 이 연구는 마이크로파를 이용한 철근콘크리트 구조물의 건전도평가 및 손상평가에 적용될 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.314-316
• /
• 2014

This letter presents two types of metamaterial-inspired absorbers adopting resistive trumpet structures at the X band. The unit cell of the first type is composed of a trumpet-shaped resonator loading a chip resistor, a metallic back plane, and a FR4 (${\varepsilon}_r=4.4-j0.02$) substrate between them (single-layer). The absorption rate is 99.5% at 13.3 GHz. The full width at half maximum (FWHM) is 95 % at 11.2 GHz (from 5.9 to 16.5 GHz). The size of unit cell is $5.6{\times}5.6{\times}2.4mm^3$. The second type has been optimized with a $7{\Omega}$/square uniform resistive coating, removing the chip resistors but leading to results comparable to the first type. The proposed absorbers are almost insensitive to polarizations of incident waves due to symmetric geometry.

• 한국자기학회지
• /
• 제10권2호
• /
• pp.86-92
• /
• 2000

자성 박막 표면에서의 일축 자기이방성을 고려한 자화의 경계조건을 Maxwell 방정식과 자화에 대한 Gilbert 방정식을 동시에 만족하는 해에 적용하여 자성박막에서 여기되는 스핀파 공명신호에 대한 모의실험을 수행하였다. 공명신호에 영향을 주는 물리량은 박막두께, 교환강성 상수, 표면 자기이방성 상수, 포화자화, 감쇠 상수, 전기비저항 등이며, 이러한 물리량들이 자성 박막에서 여기되는 스핀파 거동에 미치는 영향을 공명흡수선의 공명자기장, 선폭, 세기로 구분하여 조사하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.14-14
• /
• 2009

High frequency electromagnetic(EM) waves are increasingly being applied in industries because of saturationat lower frequency bands as a result of huge demand. However, electromagneticinterference (EMI) has become a serious problem, and as a result, highfrequency EM absorbers are now being extensively studied. Also, recentdevelopments in absorber technology have focused on producing absorbers thatare thin, flexible, and strong. Hence, one-dimension ferrous nano-materials area potential research field, because of their interesting electronic andmagnetic properties. Commercially, EM wave absorbing products are made ofcomposites, which blend the insulating polymer with magnetic fillers. Inparticular, the shape of the magnetic fillers, such flaky, acicular, or fibrousmagnetic metal particles, rather than spherical, is essential for synthesizingthin and lightweight EM wave absorbers with higher permeability. High aspectratio materials exhibit a higher permeability value and therefore betterabsorption of the EM wave, because of electromagnetic anisotropy. Nanowires areusually fabricated by drawing, template synthesis, phase separation, selfassembly, and electrospinning with a thermal treatment and reduction process.Producing nanowires by the electrospinning method involves a conventionalsol-gel process that is simple, unique, and cost-effective. In thispresentation, Magnetic nanowire and dielectric materials coated magneticnanowire with a high aspect ratio were successfully synthesized by theelectrospinning process with heat treatment and reduction. In addition toestimating the EM wave absorption ability of the synthesized magnetic anddielectric materials coated magnetic nanowire with a network analyzer, weinvestigated the possibility of using these nanowires as high-frequency EM waveabsorbers. Furthermore, a wide variety of topics will be discussed such as thetransparent conducting nanowire and semiconducting nanowire/tube with theelectrospinning process.

• 한국전자파학회논문지
• /
• 제8권6호
• /
• pp.665-680
• /
• 1997

본 논문에서는 350 MHz와 900 MHz 평면파에 노출된 다양한 모델의 인체 두부 내 비흡수율(specific abs sorption rate, SAR)의 분포를 해석하였다. 해석 방법은 유한차분시간영역(finite-difference time-domain, FDTD) 방법이며, 인체 두부 모델로서 균질 매질의 구형모델, 균질의 실질적인 형태를 갖는 모텔 그리고 실질적인 형태를 갖는 비균질 모델이 사용된다. 입사 평면파의 편파는 인체 길이방향과 일치하며, 진행방향은 뒤에서 암으로, 그리고 앞에서 뒤로 향하는 두 가지 경우를 다룬다. 얻어진 연구결과는 다음과 같다. 1) 세 가지 모델의 평균 SAR은 비슷하나 국부 SAR은 큰 차이가 있다. 2) 주파수가 900 MHz보다 두부의 공진이 일어나는 대역인 350 MHz에서 복사전력이 더 깊이 침투한다. 3) 후방입사 평변파의 경우에는 두부가 아닌 목 부근에서 "hot spot"이 일어난다. 4) 전방입사 평면파의 경우에는 900 MHz에서는 코, 350 MHz의 경우에는 입술 위와 턱 부분에 "hot spot"이 나타난다.