• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1638-1642
• /
• 2007

This paper investigated the destruction effect of the semiconductors by impact of high power electromagnetic wave. The experiments is employed as an open-ended waveguide to study the destruction effects on semiconductor using a 2.45 GHz 600 W Magnetron as a high power electromagnetic wave. The semiconductors are located at a distance of $31cm\sim40cm$ from the open-ended waveguide and are composed of a LED drive circuit for visual discernment. Also the chip condition of semiconductor is observed by SEM(Scanning Electron Microscope) analysis. The semiconductor are damaged by high power electromagnetic wave at about 860 V/m. The SEM analysis of the destructed devices showed onchipwire and bondwire destructions. Based on the result, semiconductor devices should have plan to protect the semiconductor devices form high power electromagnetic wave. And the database from this experiment provides the basis for future investigation.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1516-1517
• /
• 2007

This paper investigated the breakdown effect of the CMOS device by impact of high power electromagnetic wave. The experiments employed a waveguide to study the current characteristics of CMOS device broken by high power electromagnetic wave. The CMOS device were composed of a LED drive circuit for visual discernment. Also CMOS device broken by high power electromagnetic wave was observed by power current. The CMOS device were broke by high power electromagnetic wave at about 10 kV/m and when power current is 75 mA. Based on the result, CMOS devices should show plan to protect the CMOS devices by high power electromagnetic wave. And the database from this experiment should provide the basis for future investigation.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.316-318
• /
• 2004

In this study, the influence of electromagnetic wave effected on human body of light sensing was classified. Subjects of the eye was stimulated by the rays of LED and the measured electrical signals(EEG, EOG and ERG) in human body were compared and analyzed in the case of exposed at electromagnetic wave or not. The result show that when the subjects were not exposed at electromagnetic wave, the ratio of a wave has a large percentage in the EEG signal and the ratio of $\beta$ wave has come to good.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2724-2726
• /
• 2002

The effect which electromagnetic wave has influence on visual activity of human, was investigated in this study. The EEG and the EOG generated by the rays of LED were measured in shield room when the subject were exposed at electromagnetic wave(820MHz, 2mV) or not exposed. Each component of the EEG was compared and evaluated on being exposed at electromagnetic wave or not. As a result was $\alpha$ wave was represented relatively low level in the case of exposed at electromagnetic wave and $\beta$ wave was represented relatively low level in the case of not exposed.

• Journal of information and communication convergence engineering
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.4
• /
• pp.51-57
• /
• 1998

According to the rapid development of the electric industry, the demand of the frequency allocation and the usage of electromagnetic wave are increased due to automation of modem society. Electromagnetic wave absorbers for anechoic chamber are needed to broaden the effective frequency bandwidth, reduce the thickness, and decrease the weight. There are various absorbers proposed for the above conditions, but they could not decisively solve the above requirements. The Electromagnetic wave absorber made by a conventional ferrite tile has, for example, broadened the effective frequency bandwidth by the way of forming air layer(practically in urethane foam, etc.) on the ferrite tile. Therefore, an air layer is formed between a reflection plate and a sintered Ni-Zn ferrite tile of 7 mm in thickness, which has reflectivity less than -20 dB from 30 MHz to 400 MHz in bandwidth. In this paper, a broadband electromagnetic wave absorber are designed, which has the reflection characteristics less than -20 dB from 30 MHz to 8,000 MHz in the bandwidth. A super broadband electromagnetic wave absorber is achieved by inserting square Ferrite Cylinders Type with the thickness less than 23.5 mm and with the frequency band from 30 MHz to 8,000 MHz under the above tolerance limits. The purpose of this research is on the development of a universal anechoic chamber for measuring radiated electromagnetic wave or immunity of electronic equipments, GTEM-cell and also a wall material for preventing TV ghost, etc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.884-890
• /
• 2003

In order to reduce the specific absorption rate(SAR) in a human head exposed to electromagnetic fields radiated by a cellular phone, we have analyzed an electromagnetic wave absorber attached to the handset. A manufactured electromagnetic wave absorber was composed of Mn - Zn, which had complex relative permittivity of 7.30-j0.05 and permeability of 2.20-i1.55. The SAR value from the electromagnetic wave absorber attachment was calculated by using the nonuniform finite difference time domain(FDTD) algorithm and measured by phantom model at 835 MHz. The SAR reduction due to the electromagnetic wave absorber are about 18 % at 835 MHz. The V.S.W.R and radiation pattern of antenna are good agreement with the normal antenna. The gain reduction due to the electromagnetic wave absorber are only 0.3 dB at 835 MHz. But the sensitivity of cellular phone generally improves about 1 dB.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.141-144
• /
• 2004

Nowadays, there has been substantial interest in whether there is an association between electromagnetic field exposure and living environment. It is increased the demand that electromagnetic wave environment and its countermeasure. In the present study, we has applied the electromagnetic absorbent inorganic paint of 'I' corporations, and measured electromagnetic waves generated in new apartment before occupancy using the standard field electromagnetic wave generating device we developed. The measurement before occupancy was $100\~131V/m$, but the measurement after occupancy was $6.9\~8.0V/m$ less than 10V/m, the comprehensive electromagnetic wave limit allowed by TCO in Sweden. The implication is that domestic apartment are exposed to extremely poor electromagnetic wave environment. Nevertheless, there have been neither serious efforts to overcome this problem, nor its alternatives and related standards. Therefore, it is necessary to continue research of related fields to establish standards and plans to improve the situation.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.183-186
• /
• 2001

In this paper, the analytical model to understand the propagation of electromagnetic waves in the foam core sandwich structures was proposed. Using the analytical model, efforts were made to find the optimal stacking sequence of composite skins for maximum transmittance of electromagnetic wave. Numerical analyses of unidirectional composites and foam as a function of incident angle were performed. From the results of analysis, the general tendencies of transmittance of electromagnetic wave through composites and foam were obtained. Based on the general tendencies, optimal stacking sequences of composite skins for the maximum transmittance of electromagnetic wave were found with certain ranges of incident angle using genetic algorithm(GA).

• Journal of the Korean Institute of Navigation
• /
• v.20 no.2
• /
• pp.97-107
• /
• 1996

The method of Electromagnetic Wave Immunity Test is continuously endeavored by IEC and CISPR as international unification, but it has not been established yet. The main reason is why it is difficult to obtain the measurement method and normalization of threshold to find out the complicated parameters for Electromagnetic Wave immunity Test. So far, thus, the Electromagnetic Wave Immunity Test is carried out case by case as the electromagnetic environment, which is set up Electromagnetic Wave Immunity Test. This study has developed an algorithm and measurement software suitable for IEC1000-4 Regulations, where a ready-made Amplifier, and Signal Generator have been used and an interconnecting Interface Board has been constructed for connecting with the other apparatuses, i.e., RF Switch, Power Meter, Field Sensor, Pre-Amp., etc. Therefore, we have achieved the aim to develop an automated software using OOP method and the measurement system.