• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.378-382
• /
• 2018

In most previous investigations of plasmonic and metamaterial applications, the metallic film has been regarded as a perfect electrical conductor. Here we demonstrate the resonance characteristics of THz metamaterials fabricated from metal film that has a finite dielectric constant, using finite-difference time-domain simulations. We found strong redshift and spectral broadening of the resonance as we decrease the metal's plasma frequency in the Drude free-electron model. The frequency shift can be attributed to the effective thinning of the metal film, originating from the increase in penetration depth as the plasma frequency decreases. On the contrary, only peak broadening occurs with an increase in the scattering rate. The metal-thickness dependence confirms that the redshift and spectral broadening occur when the effective metal thickness drops below the skin-depth limit. The electromagnetic field distribution illustrates the reduced field enhancement and reduced funneling effects near the gap area in the case of low plasma frequency, which is associated with reduced charge density in the metal film.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.375-381
• /
• 2002

A rigorous analysis of a broad wall slot array is presented. The slot is longitudinal and offset from the center line in the rectangular waveguide. Pertinent integral equations are developed, taking into account finite wall thickness. The mothed of moment with entire basis function is used to solve a pair of coupled-integral equations, derived from the electromagnetic boundary conditions using modified Green's function, to find the tangential electric field on the upper and lower surfaces of the slot. Numerical results for resonant length and scattering parameters of the slots are Presented over a range of offset. Computed results are compared with experimental result.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.191-194
• /
• 2002

We analyzed radiation characteristics of dipole antenna in a lossy 9round with conducting object located above ground. Electric field integral equation is used to solve the problem. In this integral equation, GPOF(Generalized Pencil of Function) method is applied to derive the closed form of the electric field due to a current source. Surface current on a conductor is expanded with a well-known vector triangle basis function. The singular integration of a triangle patch is transformed to the non-singular integration by Duffy's method. This transformed non-singular integration is easily calculated by using one-dimensional Gaussian quadrature rule, instead of usual closed form evaluation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.31-38
• /
• 1992

In this paper, numerical analysis package using Time-Domain Finite Difference (TDFD) method is developed to solve the initial value problem of Maxwell's equation and applied to several microstrip structures. TDFD allows us to show graphically the evolution of the crosswalk between microstrip lines. Moreover, we can obtain transmission line parameters and scattering parameters through Fourier transform of TDFD results in easy and efficient ways. TDFD is successfully applied to :1) wide band electromagnetic wave propagation along the single microstrip line, 2) crosswalk analysis between two microstrip lines, and 3) three metal line side-coupled filter. Our results show much better agreement with other theoretical experimental results reported in the literature. Thus we expect that TDFD is very useful to designing MMIC(Monolithic Microwave Integrated Circuit).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.605-610
• /
• 1997

An analysis method for the electromagnetic scattering of a Tm polarized plane wave from a periodic strip grating over a grounded dielectric slab is considered from the viewpoint of reflection grating problem. The parameters of strip gratings showing Bargg and Off-Bragg blazing phenomena at the frequency of 10GHz are derived teoretically. The strip grating structure is implemented using Aluminum plate(groung conductor), paraffin(dielectric material.epsilon.$_{r}$=2.24), and copper(strip conductor0.08m thickness). The experimental results(reflection power) of Bragg as well as Off-Bragg blazing phenomenon for TM polarized plane wave have been compared with the theoretical results and fairly good agreements between theory and experiment have been observed.d.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.229-237
• /
• 2023

The mechanics underlying photon and electron interactions was validated using our developed Brachytherapy computer code for high Dose Rate (HDR). By comparing the photon cross-section utilizing multiple physics libraries in the developed code, the results were benchmarked against experimental and theoretical findings. Klein-Nishina and experimental cross-section results were in good agreement with the Livermore library results. For two therapeutically relevant materials, the first scattered electron range was measured within 1 mm and 2 mm, which has significant implications for the interpretation of the kernel dose spikes observed in previous research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.566-576
• /
• 2016

Inverse synthetic aperture radar(ISAR) image generated from bistatic radar(Bi-ISAR) represents two-dimensional scattering distribution of a target, and the Bi-ISAR can be used for bistatic target identification. However, Bi-ISAR has large variability in scattering mechanisms depending on bistatic configurations and do not represent exact range-Doppler information of a target due to inherent distortion. Thus, an efficient training DB construction is the most important factor in target identification using Bi-ISARs. Recently, a database construction method based on realistic flight scenarios of a target, which provides a reliable identification performance for the monostatic target identification, was applied to target identification using high resolution range profiles(HRRPs) generated from bistatic radar(Bi-HRRPs), to construct efficient training DB under bistatic configurations. Consequently, high identification performance was achieved using only small amount of training Bi-HRRPs, when the target is a considerable distance away from the bistatic radar. Thus, flight scenarios based training DB construction is applied to target identification using Bi-ISARs. Then, the capability and efficiency of the method is analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1183-1189
• /
• 2014

The accuracy of the resistive-sheet technique in calculating the RCS(Radar Cross Section) of a deciduous leaf is examined in this paper for various thicknesses and dielectric constants, and a range of thicknesses for the resistive sheet technique is proposed. At first, a leaf was assumed to be a lossy dielectric disk, and the dielectric disk was again assumed to be a resistive sheet with an appropriate resistivity for a given thickness, a dielectric constant, and a frequency. Then, the RCS of the leaf was computed using the physical optics(PO) method, and was compared with the calculation results of a numerical analysis: i.e., a commercial tool based on the FEM (Finite Element Method) technique. It was shown that the error increases as the thickness increases. The error was 0.1 dB, for example, when the thickness is 1.2 mm and 3.7 dB when the thickness is 3 mm with a dielectric constant of(21.4, 9.7) at 9.6 GHz. It was also found that the error decreases as the dielectric constant increases. This study will be very useful for calculating the scattering characteristics of numerous leaves in a vegetation canopy for estimating its radar backscatter using scattering model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1196-1203
• /
• 2012

This paper presents a study on the calibration of a C-band HPS(Hongik Polarimetric Scatterometer) system using the DMMCT(Differential Mueller Matrix Calibration Technique). For calibration of the polarimetric scatterometer system, a fully-polarimetric antenna pattern(magnitudes and phase-differences) of the antenna main-beam is measured using a conducting sphere at anechoic chamber. The polarimetric scatterometer system could be accurately calibrated after retrieving its distortions using the DMMCT. Unlike a single-polarimetric system, in a fully-polarimetric system, not only backscattering coefficients but also phase differences are important parameters. This calibrated HPS system can be used to measure accurate Mueller matrices of bare soil surfaces, rice paddies, and vegetation fields. The phase-difference parameters as well as the backscattering coefficients for co- and cross-polarizations can then be obtained. The accuracy of calibration was verified by comparing the measured backscattering coefficients with a scattering model. The measured polarization response of a plowed bare field was also compared with the polarization response which was synthesized using a polarimetric scattering model for verifying the calibration technique.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.875-880
• /
• 2014

Adsorption of 4,4'-bis(mercaptomethyl)biphenyl (44BMBP) on silver nanoparticles has been investigated by surface-enhanced Raman scattering (SERS) spectroscopy. In addition, the Raman spectra of 44BMBP in solid state and in basic condition have been obtained for comparative study to elicit the characteristics of adsorption. The observed Raman and SERS spectra were analyzed comparing with the normal modes and vibrational frequencies from density functional theory (DFT) calculations performed for the feasible structures of 44BMBP molecule. On the basis of excellent agreement between the calculated and the experimental results, the molecule is found to have both the cis- and trans-forms for the mercaptomethyl groups in the solid state as well as in the basic condition. In contrast, the molecule is found to be chemisorbed on the silver surface by forming two Ag-S linkages only in the cis-form but not in the trans-form due to the steric interruption, which indicates the parallel orientation of molecules on the surface. Particularly, the spectral features in the SERS spectra such as the absence of the C-H stretching band and enhancement for the out-of-plane skeletal modes are confirmatory for the parallel geometry through ${\pi}$ interaction between the phenyl rings and the metal surface, based on the electromagnetic surface selection rule.