• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.222-226
• /
• 2021

To comply with CE marking requirements, the electromagnetic compatibility (EMC) and low-voltage directive (LVD) tests are conducted on the sub-racks of International Thermonuclear Experimental Reactor (ITER) AC/DC converters and bypass switches. The EMC tests consist of a series of tests, including the electromagnetic interference test, the electromagnetic field immunity test, and the rapid transient burst immunity test. In the LVD test, the electric shock protection test, the xcessive temperature limit and heat resistance of equipment tests, and the fire spread prevention test are performed. This work presents and reviews the European Directive for EMC/LVD and introduces the methods of EMC and LVD tests for the sub-racks of AC/DC converters and bypass switches. It also evaluates the test method and results to meet the European Directive requirements for CE marking. The sub-racks of ITER AC/DC converters and bypass switches successfully pass the EMC and LVD tests.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.14-21
• /
• 1996

전자기적합성 전문위원회(TC 77 : Electromagnetic Compatibility)는 현재 IEC/TC중 에서 가장 활동이 활발한 TC 가운데 하나이다. 이는 거의 모든 산업 분야에 중요한 문제로 대두 되고 있는 EMC의 표준화를 담당하고 있기 때문이다. 이 글에서는 IEC/TC 77의 배경 및 업무 등 을 간단히 살펴 보고, EMC 표준화 전반에 걸쳐 관련되고 모든 EMC 규격의 바탕이 되는 '기본 E MC 간행물(IEC 1000 시리스)'의 현황을 알아 본다. 여기서는 IEC 1000 시리스 외에도 EMC 관련 이 많은 CISPR 규격 등 몇개를 포함시켰으나, SC 77C(HEMP) 관련 규격은 생략하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.187-190
• /
• 2002

The Electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. but Increasing awareness of electromagnetic compatibility(EMC) issues in lighting application, the problems of interference generation by electrodeless fluorescent lighting system have been highlighted. In this paper, Maxwell 2D finite element analysis program(Ansoft) is used to obtain electromagnetic properties associated with the coil and nearby structures. and also evaluated Flux B, H by changing the input current.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.153-163
• /
• 2003

Electronic equipments and make other electronic systems to operate abnormally by means of electromagnetic interference, or can operate abnormally themselves by electromagnetic interference of other electronic systems. Therefore, electronic equipments are required to reduce their electromagnetic interference as small as for other systems to operate properly and operate properly within electromagnetic interference from other electronic systems. In order to prove that electronic equipments meet such requirements, they should undergo electromagnetic environmental test. In this study, we introduce electromagnetic environmental requirements, test procedures and test results of gimbal engine actuation system of KSR-III.

• Journal of electromagnetic engineering and science
• /
• v.14 no.3
• /
• pp.273-277
• /
• 2014

In this research, integral transform technique for electromagnetic scattering formulation is reviewed. Electromagnetic boundary-value problems are presented to demonstrate how the integral transforms are utilized in electromagnetic propagation, antennas, and electromagnetic interference/compatibility. Various canonical structures of slotted conductors are used for illustration; moreover, Fourier transform, Hankel transform, Mellin transform, Kontorovich-Lebedev transform, and Weber transform are presented. Starting from each integral transform definition, the general procedures for solving Helmholtz's equation or Laplace's equation for the potentials in the unbounded region are reviewed. The boundary conditions of field continuity are incorporated into particular formulations. Salient features of each integral transform technique are discussed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.761-768
• /
• 2017

In this paper, to implement the electromagnetic wave environment and solve electromagnetic compatibility(EMC) problem, miniaturization of ultra-wide band log periodic dipole antenna for measurement was investigated. In addition, in oder to improve the signal-to-noise ratio in high frequency band, balun was connected to the antenna to stabilize the operation of the differential mode antenna and the single mode coaxial cable. To minimize the total size and to increase bandwidth of the antenna, a fat dipole structure was used for the resonance frequency band below 4 GHz and a general dipole shape was used for that above 4 GHz. The bandwidth of the proposed antenna was represented from 0.6 GHz to 8.0 GHz with a ratio bandwidth of 12.3 : 1. Measured peak gain varies from 5.7 dBi to 9.1 dBi, and a half power beamwidth was presented from $29.4^{\circ}$ to $100.2^{\circ}$ in operating range.

• Journal of electromagnetic engineering and science
• /
• v.4 no.2
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.171-178
• /
• 2015

3GPP long-term evolution(LTE) band 2.3~2.4 GHz is adjacent to 2.4~2.5 GHz band for WLAN, and therefore compatibility study of the two systems is desirable. We propose a dynamic system simulation methodology to investigate the effect of WLAN interference on LTE systems. As capturing space/time/frequency changes in system parameters, the dynamic system simulation can exactly predict real system performance. Using the proposed methodology, we obtain LTE downlink throughput loss for the frequency separation between the two systems. Throughput loss under 1 % is obtained from guard band over 11 MHz(single channel allocation) or 10 MHz(three channel allocation).

• Journal of Aerospace System Engineering
• /
• v.1 no.3
• /
• pp.1-6
• /
• 2007

The COMS(Communication, Ocean & Meteorological Satellite)is the geostationary satellite which will be performing three main objectives such as meteorological service, ocean monitoring and Ka-band satellite communications. This paper presents the analysis of the electromagnetic radiated compatibility between COMS satellite and the ARIANE 5 launch vehicle. As a conclusion, a good level of confidence can be given at present time to demonstrate the compatibility between the spacecraft and the launcher, and vice versa. No threat has been identified regarding the other units powered during launch mode.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.524-526
• /
• 2002

본 논문에서는 전력계통 관련 기기에서 문제가 되고 있는 전자기적합성(Electromagnetic Compatibility, 이하 EMC)을 다루고자 한다. 전력계통은 서지와 같은 많은 전자기 장해를 발생한다. 그래서 최근 제정 및 개정되고 있는 전자기기 회로가 포함되어 있는 IEC 규격에서는 대부분 EMC 시험을 포함하고 있다. 본 논문에서는 전력계통과 EMC 연관성을 검토하고자 한다. 또한 주요 중전기기의 EMC 규격 동향을 소개하고자 한다. 마지막으로 국내 전력계통 기기에서 발생한 실제 EMC 문제를 소개하고자 한다.