• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1997-2001
• /
• 2010

Generally, railroad soil around turnout was caused by leakage of lubricant oils during its maintenance. So, TPH concentration in soil was much higher than standard in Soil Envirnment Law. In additiont, railroad site was still difficult to assess due to railcar operation. This research was conducted to investigate the effect on electrolyte concentration during the Electrokinetic-Fenton process for contaminated soil around railroad turnout. As a result, experimental result shows that TPH removal in soil and amount of EOF were changed depending on electrolyte concentration. In future, the removal efficiency can be enhanced to optimize concentration in EK-Fenton Process.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.2
• /
• pp.204-211
• /
• 2006

The electrolyte in the solid oxide fuel cell must be dense enough to avoid gas leakage and thin enough to reduce the ohmic resistance. In order to manufacture the thin and dense electrolyte layer, 8 mol% $Y_2O_3$ stabilized-$ZrO_2$ (8YSZ) electrolyte layers were coated on the porous tubular substrate by the novel vacuum slurry dip-coating process. The effects of the slurry concentration, presintering temperature, and vacuum pressure on the thickness and the gas permeability of the coated electrolyte layers have been examined in the vacuum slurry coating process. The vacuum-coated electrolyte layers showed very low gas permeabilities and had thin thicknesses. The single cell with the vacuum-coated electrolyte layer indicated a good performance of $495\;mW/cm^2$, 0.7 V at $700^{\circ}C$. The experimental results show that the vacuum dip-coating process is an effective method to fabricate dense thin film on the porous tubular substrate.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.273-279
• /
• 2020

BACKGROUND: After transplanting, the recent abnormal low temperature caused physiological disorders of pepper seedlings. This study was conducted to evaluate the effects of UV-A LED, a physical elicitor, on the chilling tolerance of pepper seedlings. METHODS AND RESULTS: Seedlings were continuously irradiated with 370 and 385 nm UV-A LEDs with 30 W·m^-2 for 6 d. After that, seedlings were exposed to 4℃ for 6 h and then recovered under the normal growing condition for 2 d. There were no significant differences in growth characteristics of UV-A treatments compared to the control. Fv/Fm values of two UV-A treatments were below 0.8. Electrolyte leakage in the control was increased by chilling stress, while 385 nm UV-A had the significantly lowest value. Total phenolic content and antioxidant capacity of two UV-A treatments significantly increased due to UV-A radiation. However, total phenolic content and antioxidant capacity of the control increased due to chilling stress and tended to decrease again during the recovery time. CONCLUSION: We confirmed that UV-A light was effective to induce the chilling tolerance of pepper seedling, and the supplemental radiation of 385 nm UV-A LED before transplanting could be used as a cultivation technique to produce high quality pepper seedlings.

• Journal of agriculture & life science
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2010

This study was conducted to investigate effect of low temperature and ripeness stages on fruit quality of chilli pepper (cv. Nockgwang) during storage at 5, 7, and $10^{\circ}C$. Fruits at three ripeness stages were selected based on uniform fruit size and three maturities on peel color: S1 (fully developed fruit just before the onset of ripening), S2 (fruits in the onset of color change), and S3 (fruits in completely red in color). Lower temperature attributed to increase fruit weight loss (WL) and WL was higher in S2 than the other ripeness stages. The highest respiration rate and ethylene production was found at S2 fruit while those of fruit in green and red showed similar and remained lower level during storage. Electrolyte leakage (EL) was higher as storage temperature decreased. After 28 d storage, EL rates of fruits at $5^{\circ}C$ were 43, 36, and 17% in S1, S2, and S3 while those at $10^{\circ}C$ were 17, 19, and 14%, respectively. These results show that chilli pepper fruits are tended to lose more water at lower temperature partially associated with increased EL. Thus, threshold storage temperature must be considered for avoiding chilling during storage and for extending the storage life of fresh pepper fruits.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.396-396
• /
• 2012

$TiO_2$ anatase nanotube arrays (NTAs) were grown by electrochemical anodization and followed annealing of Ti foil. Ethylene glycol/$NH_4F$-based organic electrolyte was used for electrolyte solution and using second anodization process to obtain free-standing NTAs. After obtaining NTAs, ITO film was deposited by sputtering process on bottom of NTAs. UV-curable NOA was used for attach free-standing NTAs on flexible plastic substrate (PEN). Solid state electrolyte (spiro-OMeTAD) was coated via spin-coating method on top of attached NTAs. Ag was deposited as a counter electrode. Under AM 1.5 simulated sunlight, optical characteristics of devices were investigated. In order to use flexible polymer substrate, processes have to be conducted at low temperature. In case of $TiO_2$ nano particles (NPs), however, crystallization of NPs at high temperature above $450^{\circ}C$ is required. Because NTAs were conducted high temperature annealing process before NTAs transfer to PEN, it is favorable for using PEN as flexible substrate. Fabricated flexible solid-state DSSCs make possible the preventing of liquid electrolyte corrosion and leakage, various application.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.70.1-70.1
• /
• 2012

In-situ X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy studies of SOFC cathode materials will be discussed in this presentation. The mixed conducting perovskites (ABO3) containing rare and alkaline earth metals on the A-site and a transition metal on the B-site are commonly used as cathodes for solid oxide fuel cells (SOFC). However, the details of the oxygen reduction reaction are still not clearly understood. The information about the type of adsorbed oxygen species and their concentration is important for a mechanistic understanding of the oxygen incorporation into these cathode materials. XPS has been widely used for the analysis of adsorbed species and surface structure. However, the conventional XPS experiments have the severe drawback to operate at room temperature and with the sample under ultrahigh vacuum (UHV) conditions, which is far from the relevant conditions of SOFC operation. The disadvantages of conventional XPS can be overcome to a large extent with a "high pressure" XPS setup installed at the BESSY II synchrotron. It allows sample depth profiling over 2 nm without sputtering by variation of the excitation energy, and most importantly measurements under a residual gas pressure in the mbar range. It is also well known that the catalytic activity for the oxygen reduction is very sensitive to their electrical conductivity and oxygen nonstoichiometry. Although the electrical conductivity of perovskite oxides has been intensively studied as a function of temperature or oxygen partial pressure (Po2), in-situ measurements of the conductivity of these materials in contact with the electrolyte as a SOFC configuration have little been reported. In order to measure the in-plane conductivity of an electrode film on the electrolyte, a substrate with high resistance is required for excluding the leakage current of the substrate. It is also hardly possible to measure the conductivity of cracked thin film by electrical methods. In this study, we report the electrical conductivity of perovskite $La_{0.6}Sr_{0.4}CoO_{3-{\delta}}$ (LSC) thin films on yttria-stabilized zirconia (YSZ) electrolyte quantitatively obtained by in-situ IR spectroscopy. This method enables a reliable measurement of the electronic conductivity of the electrodes as part of the SOFC configuration regardless of leakage current to the substrate and cracks in the film.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.30-36
• /
• 2019

In this study, we reported a solid-state supercapacitor consisting of titanium nitride (TiN) nanofiber and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT-PSS) conducting polymer electrode and poly(vinyl alcohol) (PVA)-based polymer electrolyte membrane. The TiN nanofiber was selected as electrode materials due to high electron conductivity and 2-dimensional structure which is beneficial for scaffold effect. PEDOT-PSS is suitable for organic/inorganic composites due to good redox reaction with hydrogen ions in electrolyte and good dispersion in solution. By synergetic effect of TiN nanofiber and PEDOT-PSS, the PEDOT-PSS/TiN electrode showed higher surface area than the flat Ti foil substrate. The PVA-based polymer electrolyte membrane could prevent leakage and explosion problem of conventional liquid electrolyte and possess high specific capacitance due to the fast ion diffusion of small $H^+$ ions. The specific capacitance of PEDOT-PSS/TiN supercapacitor reached 75 F/g, which was much higher than that of conventional carbon-based supercapacitors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.334-338
• /
• 2003

The objective of this study was to demonstrate whether or not the deleterious effects of accelerated aging on seed vigour and viability are alleviated by interaction with gamma irradiation. Seeds of soybean (Glycine max L.) were artificially aged and subsequently irradiated with 4 and 8 Gy of gamma irradiation. Germination rate was negatively affected by accelerated aging and positively by gamma irradiation, with a positive interaction of a 3day-seed aging treatment occurring with 4 Gy, possibly suggesting that 4 Gy of gamma irradiation partially offset the adverse effects of seed aging on germination. However, 5-day aged seeds did not gain any benefits from the gamma irradiation. Electrolyte leakage from the seeds increased with the duration in days aged. Irradiation, however, did not impose any effects on the leakage. Respiration rate of the seed with hypocotyl and primary root was significantly low for the aged seeds, but not for the seeds with both irradiation and aging treatments. Accelerated aging decreased the dry weight of the hypocotyl and primary root of the seeds without any measurable effects of irradiation. $\alpha$-Amylase activity decreased with seed aging and positively responded to gamma irradiation. The data is discussed with regard to the possible roles of gamma irradiation for improving the seed vigour and viability of aged seeds.

• Korean Journal of Plant Resources
• /
• v.21 no.4
• /
• pp.324-328
• /
• 2008

One hundred-eighty extracts of soil collected from ginseng (Panax ginseng C.A. Meyer) fields were subjected to lettuce germination test, electrolyte leakage, cell viability and antioxidant enzyme activity test. Regardless of various cultivation periods, there was no significant difference in soil pH, the content of organic matter and available phosphate in ginseng fields. Based on lettuce seed germination test, six soil extracts showing inhibition of germination and/or seedling growth were selected for further study. Selected soil extracts markedly inhibited cell viability of ginseng cultured cells but leakage of electrolytes were not affected by the treatment. Enzyme activity of superoxide dimutase in ginseng cultured cells was not affected by the treatment with the soil extracts. However, those of peroxidase and catalase were significantly inhibited by the treatment with soil extracts which showed inhibition of lettuce seed germination and seedling growth.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.90.1-90.1
• /
• 2010

The design and fabrication of a metallic bipolar plate-gasket assembly for polymer electrolyte fuel cells (PEMFCs) is defined. This bipolar plate-gasket assembly was prepared by inserting a previously prepared bipolar plate in the specially designed gasket mold. For this aim, a proprietary fluoro-silicone based rubber was injected directly into the bipolar plate borders. Gaskets obtained like this showed the chemically / physically stable and the good sealibilty in typically operating PEM fuel cell conditions. And also, this bipolar plate-gasket assembly shows lots of advantages with respect to traditional PEMFCs stack assembling systems: useful application to automative stacking due to easy handling, reduced fabrication time, possibility of quality control and failed elements substitution. This bipolar plate-gasket assembly was evaluated in the short fuel cell stack and met the leakage requirement for normal operation both in short-term and in long-term operation. Especially, it was confirmed that this gasket could be applied successfully even in the high pressure FEM fuel cell systems(over 2.0 bar in absolute pressure).