• 폴리머
• /
• 제26권4호
• /
• pp.543-550
• /
• 2002

곁사슬에 정공 및 전자 전달체로 triphenylamine moiety와 triazine moiety를 갖는 새로운 공중합체를 합성하였다. ITO/공중합체와 발광물질 (DCM, coumarin 6, DPvBi)/Al으로 구성되는 단층형 유기 EL 소자는 정공 전달 단위체와 전자 전달 단위체 비율이 6:4와 방광물질의 함유량이 30 wt%일 때 최고의 외부 양자 효율을 나타내었다. 특히 위에서 제작한 유기 EL 소자는 각각 발광물질에 상응하는 빨강 (620 nm), 초록 (520 nm)과 파랑색 (450 nm)의 빛을 발광하였다. 최고 휘도는 DC 12V에서 ITO/공중합체 (6:4)와 DCM (30 wt%)/Al으로 구성되는 소자를 구동하였을 때 500 cd/$m^2$이었다.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.198-202
• /
• 2007

A new organic light emitting device(OLED) with two peak wavelength(blue and yellow) emission was fabricated using the selective doping in a single fluorescent host , and its electrical and optical characteristics were investigated. The fabricated device showed the luminance and efficiency of 1600 $Cd/m^2$ and 2.4 Im/W under the applied voltage of 10V, respectively. And its electroluminescent spectra had two peak wavelengths of 470nm and 560nm emitting bluish white light. The OLED with dual wavelength emission in this experiment is likely to be developed as a white OLED with simpler fluorescent system than conventional devices.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.601-604
• /
• 1999

Electroluminescence(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. Recently, many EL researcher have interested a new emissive organic material. In this study, light-emitting organic electroluminescent devices were fabricated using Langmuir-Blodgett(LB) technique with new emissive organic material. This new emissive organic material were synthesis by our teams and we called PECCP [poly(3,6-N-2ethylhexyl carbazoly cyanoterephthalidene)] which has strong electron donor group and electron acceptor group in main chain repeat unit. This material has good solubility in common organic solvent such as chloroform. THF, etc. and has a good stability in air. In here, the new emissive material is applied to Langmuir-Blodgett(LB) method because our new material has a good stability in air. Optimum conditions of film deposition were examined by a surface pressure-area( $\pi$ -A) isotherms with various factors. The LB film were deposited on a indium Tin Oxide(ITO) glass. We were investigated by measuring current-voltage(I-V) characteristics. Also we were measured the UV/visible absorption at about 410nm and PL spectrum at about 530nm. We are attempt to the electroluminescence device properties of the new emissive material by Langmuir-Blodgett(LB) technique.

• Transactions on Electrical and Electronic Materials
• /
• 제10권6호
• /
• pp.208-211
• /
• 2009

The authors have demonstrated the various characteristics of hybrid white organic light-emitting diodes (HWOLED) using fluorescent blue and phosphorescent red emitters. We also demonstrated that two devices showed different characteristics in accordance with thickness of the 4,4′-N,N′-dicarbazole-biphenyl (CBP) spacer (CS) inserted between the blue and the red emitting layer. It was found that the device with a CS thickness of 70 $\AA$ showed a current efficiency 2.5 times higher than that of the control device with a CS thickness of 30 $\AA$ by preventing the triplet Dexter energy transfer from the red to the blue emitting layer. The HWOLED with the CS thickness of 70 $\AA$ exhibited a maximum luminance of 24500 cd/$m^2$, a maximum current efficiency of 42.9 cd/A, a power efficiency of 37.5 lm/W, and Commission Internationale de I'Eclairage coordinates of (0.37, 0.42).

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.107-111
• /
• 2013

A new green-emitting material with donor-acceptor architecture, 3,7-bis(1'-phenylbenzimidazole-2'-yl)-10-phenylphenothiazine (BBPP) was synthesized and its thermal, optical, and electroluminescent characteristics were investigated. Organic light-emitting diodes (OLEDs) with four different multilayer structures were prepared using BBPP as an emitting layer. The optimized device with the structure of [ITO/2-TNATA (40 nm)/BBPP (30 nm)/TPBi (30 nm)/Alq3 (10 nm)/LiF (1 nm)/Al (100 nm)] exhibited efficient green emission. Enhanced charge carrier balance and electron mobility in the organic layers enabled the device to demonstrate a maximum luminance of 31,300 cd/$m^2$, a luminous efficiency of 6.83 cd/A, and an external quantum efficiency of 1.62% with the CIE 1931 chromaticity coordinates of (0.21, 0.53) at a current density of 100 mA/$cm^2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1783-1785
• /
• 1999

In this paper, we apply V-Q Lissajoucs' figure for observation of a V-Q (Voltage-Charge) hysteresis loop at interface between phosphor and insulation layer in P-ELDz which are a simple structure and the back lighting of LCDs (Liquid Crystal Display). In V-Q Lissajous' figure, we measured a change of hysteresis loop according to the thickness of Insulation and phosphor layer. From experiment result, we will be obtained a optimum thickness of insulation with comparing the correlation of a V-L (Voltage-Luminance) and V-Q hysteresis loop.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1526-1528
• /
• 1999

In this papaer, 7-segment was implemented using AC powder EL. ZnS:Cu and $BaTiO_3$ was used as a phosphor and dielectric respectively. The preparation of phosphor and dielectic layer was performed with screen printing. The implemented system of 7-segment was divided as following; EL display. driving circuit. software for driving. The properties of fabricated devices was measured with EL spectrum. brightness and J-V.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.899-903
• /
• 2013

We investigated the luminescence properties of $Alq_3$ in the device structure of ITO/CuPc/TPD/$Alq_3$/Al. The CuPc as a hole-injection material and TPD as hole-transport material. Emission properties were measured by varying a layer thickness of CuPc (0 nm to 50 nm), which is the hole-injection layer. As a result, it was found that the hole injection occurs smoothly when the layer thickness was 20 nm among the thicknesses from 0 nm to 50 nm.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.1-6
• /
• 1999

청녹색 발광을 하는 분산형 전계 발광 소자의 제작, 전기적 및 광학적 특성에 관하여 검토하였다. 전기적 및 광학적 특성에서 전류와 휘도는 전압과 주파수에 따라 증가하였으며, 휘도는 20㎑, 150V의 구동 조건에서 840㏅/㎡를 보였다. 그리고 그 결과를 등가회로화에 의해서 설명하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1537-1538
• /
• 2007

ZnS:Cu,Cl phosphor was synthesized by solid-liquid state reaction with two firing steps. Each stage of the process was carefully monitored so that the final product was comparable to commercially-available phosphor. The effect of $Cu^{2+}-doping$ concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electroluminescent device.