• 폴리머
• /
• 제25권2호
• /
• pp.302-310
• /
• 2001

무전해도금법을 이용하여 구리/PET 필름 복합재료를 제조하였으며 에칭방법과 촉매액의 조성 및 acceleration 방법을 달리하여 PET 필름과 무전해도금된 구리 피막간의 접착력을 향상시키고자 하였다. HCl 용액으로 에칭된 PET 필름은 NaOH에 의한 것보다 더욱 세밀하게 에칭되어져 구리와 PET 필름간의 접착력은 향상되었으나 전자파 차폐효과는 유사한 경향을 보였다. 촉매액의 조성변화에 따른 영향을 살펴본 결과 PdCl$_2$:SnCl$_2$의 몰비가 1:4에서 1:16으로 증가할수록 PET 필름 위에 적층된 Pd/Sn 콜로이드 입자들의 크기가 감소하며 고르게 분포되는 경향을 보였다. 따라서 이들의 몰비가 증가할수록 구리도금이 균일하고 조밀하게 이루어져 접착력 및 차폐효과가 증가하였다. 또한 NaOH보다 HCl로 acceleration한 경우 촉매 입자의 크기가 작고 더 균일하게 분포되어 우수한 접착력과 도금물성을 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1091-1098
• /
• 1998

Thermal stability of the electroless deposited Cu thin film was investigated. Cu/TaN/Si multilayer was fabricated by electroless-depositing Cu thin layer on TaN diffusion barrier layer which was deposited by MOCVD on the Si substrate, and was annealed in $H_2$ ambient to investigate the microstructure of Cu film with a post heat-treatment. Cu thin film with good adhesion was successfully deposited on the surface of the TaN film by electroless deposition with a proper activation treatment and solution control. Microstructural property of the electroless-deposited Cu layer was improved by a post-annealing in the reduced atmosphere of $H_2$ gas up to $600^{\circ}C$. Thermal stability of Cu/TaN/Si system was maintained up to $600^{\circ}C$ annealing temperature, but the intermediate compounds of Cu-Si were formed above $650^{\circ}C$ because Cu element passed through the TaN layer. On the other hand, thermal stability of the Cu/TaN/Si system in Ar ambient was maintained below $550^{\circ}C$ annealing temperature due to the minimal impurity of $O_2$ in Ar gas.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1352-1355
• /
• 2004

We have applied front contact metallization of plated nickel and copper for high efficiency passivated emitter rear contact(PERC) solar cell. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. The plating technique is a preferred method for commercial solar cell fabrication because it is a room temperature process with high growth rates and good morphology. In this system, the electroless plated Ni is utilized as the contact to silicon and the plated Cu serves as the primary conductor layer instead of traditional solution that are based on Ti/Pd/Ag contact system. Experimental results are shown for over 20 % PERC cells with the Plated Ni/Cu contact system for good performance at low cost.

• 마이크로전자및패키징학회지
• /
• 제15권2호
• /
• pp.17-21
• /
• 2008

Sn-Cu계 솔더 범프에서 무전해도금법을 이용한 범프 형성에 대한 연구를 하였다. $20{\mu}m$ via에 전기도금법으로 구리를 채운 웨이퍼 위에 ball형태의 범프를 형성하기 위하여 구리와 주석을 도금하여 약 $10{\mu}m$높이의 범프를 형성하였다. 구리 범프 형성 시 via위에 선택적으로 도금하기 위하여 활성화 처리 후 산세처리를 실시하고 무전해 도금액에 안정제를 첨가하였다. 무전해도금법을 이용하여 주석 범프 형성 시 도금층이 구리 범프에 비해 표면의 균일도가 벌어지는 것으로 관찰되었지만 reflow공정을 실시한 후 ball 형태의 균일한 Sn-Cu 범프를 형성하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.100-103
• /
• 2001

본 연구에서는 무전해도금으로 증착된 구리박막의 열적 및 접착특성에 관하여 고찰하였다. Si 기판에 MOCVD 방법으로 TaN 확산방지막을 증착한 후, 무전해 도금으로 구리박막을 증착하여 Cu/TaN/Si 다층구조를 제조공정하였다. 그리고, Ar 분위기에서 열처리시켰으며, 열처리온도에 따른 비저항 변화를 고찰함으로서 Cu/TaN/Si 계의 열적 특성을 분석하였다. 무전해도금 구리박막의 접착특성은 스크래치 테스트에 의해 평가하였으며, 열적 증착방법과 스퍼터 방법으로 증착된 구리 박막과 비교하였다. 스크래치 테스트 결과, 무전해도금 구리 박막의 접착력이 열적 증착과 스퍼터 방법으로 증착된 구리 박막보다 더 우수하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 한국재료학회 춘계학술발표강연 및 논문개요집
• /
• pp.117-117
• /
• 1998

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1998년도 추계학술발표강연 및 논문개요집
• /
• pp.34-34
• /
• 1998

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.149-157
• /
• 2015

We investigated the effects of the fabric structure or the kinds of plated metals on the electromagnetic interference shielding effectiveness (EMI SE) by means of electroless plating on polyester fabric. We found that the weight of deposited metal, EMI SE, and flexibility of the conductive fabric for EMI shield is affected by morphology of fabric and structure of fiber. The EMI SE of conductive fabric plated Ni/Cu/Ni by electroless plating method on draw textured yarn (DTY) polyester was in the practically useful range of above 70 dB over a wide frequency range of 10 MHz to 1.0 GHz at the surface resistivity of $0.05{\Omega}/{\square}$. Au or Ag plated conductive fabric by immersion plating method is not able to provide for a good EMI SE.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.15-16
• /
• 2008

In case manufacturing COF, through hole should be made to be used for a pathway connecting the conductive layers of its both faces. In case Cu-plating inside of through hole with electroless plating way, contact between Cu and PI film gets bad to be fell apart from PI by the impact of applying to the electric devices. Therefore, after sputtering is applying on inner through hole, then a method to perform electroplating process. In this study, after changing sputtering condition to manufacture FCCL, we looked the changeability of the upper PI and inner hole Cu layers. Making use of RF Magnetron sputtering equipment, we coated Cu thin film and Cu-plated on it through electroplating. After cold-mounting the completed FCCL, we examined hole section through an optical microscope. From the result of test, with parameters deposition pressure and deposition time, both the thickness of the hole plated layer and PI plated upper layer increased at regular rate, increasing the thickness of Cu sputter layer. However, from the result of test in increasing RF-power, we could know the increment rate of hole plated layer is considerably greater than that of PI plated upper layer. Therefore, we finally acquired good result; if you want only to increase the plated layer of inner hole, it's much better to increase RF-power.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.215-221
• /
• 2017

The electroless plating process largely consists of substrate cleaning, seed formation (activator formation), and electroless plating. The most widely used activator in the seed formation step is Pd, and Sn ions are used to facilitate the formation of this Pd seed layer. This is problematic because the Sn ions interfere with the reduction of Cu ions during electroless plating; thus, the Sn ions must be removed by a hydrochloric acid cleaning process. This method is also expensive due to the use of Pd. In this study, Cu electroless plating was performed by forming a seed layer using a silver nanosol instead of Pd and Sn. The effects of the Ag nanosol concentration in the pretreatment solution and the pretreatment time on the thickness and surface morphology of the Cu layer were investigated. The degrees of adhesion to the substrate were similar for the electroless-plated Cu layers formed by conventional Pd activation and those formed by the Ag nanosol.