• 동력기계공학회지
• /
• 제8권3호
• /
• pp.36-43
• /
• 2004

The effect of bath composition, plating condition and plating rate on the magnetic property of electroless Co-Cu-P deposits were investigated. With increasing $CuCl_2$ concentration in the bath, plating rate increased, while the Br value of deposit decreased sharply. Deposited surface were inferiority by the increase pH above 10.5, bath temperature higher than $80^{\circ}C$. Plating reaction had been ceased by the increase of pH above 11, bath temperature higher than $90^{\circ}C$ and under $40^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent(sodium citrate) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer (thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(20min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.625-628
• /
• 1999

Recently. high-density printed circuit boards(PCB) become indispensable with the minaturization of components. Nickel is deposited on the copper patterns and followed by the gold deposition for improving connection reliability between the printed circuit boards and electronic components. Conventionally electrodeposition has been applied to metalization of copper patterns. However metalization by this method is not applicable for the isolated fine and concentrated patterns. Therefore, metalization technology of the fine patterns by electroless plating is required in place of electrodeposition. The application of electroless nickel plating for interconnection with solder strongly relies on the solderability and the interactions between nickel and solder. Factors such as phosphorus content of the deposit additive and bath temperature may influence solderability of the electroless nickel deposit. So solderability of electroless nickel/ gold deposits was investigated with substrates plated changing the condition of nickel solution.

• 전기화학회지
• /
• 제2권3호
• /
• pp.138-143
• /
• 1999

최근 large scale integrated circuits(LSI) 및 printed circuit board(PCB)의 세밀화가 전자기기의 소형화로 인하여 필수 불가결하게 되었다. 전해 도금은 LSI및 PCB의 전도도 및 부식저항을 향상시키기 위해서 전도성 라인의 말단에 적용되고 있다. 그러나 회로 기판의 소형화 및 고직접화로 인하여 적용되지 못하고 있다. 따라서 최근 무전해 도금은 복잡한 장치와 외부에서 전원을 필요치 않는 작동의 간편함 때문에 매우 각광 받고 있는 방법 중의 하나이다. 본 연구는 무전해 니켈/금도금의 도금 기술 개발을 위해 시험하였다. 무전해 니켈 도금은 $85^{\circ}C$의 도금 욕에서 PCB기판 위에 침적 시켰고 그 다음 금층은 동일한 방법으로 $90^{\circ}C$에서 니켈 층위에 침적 시켰다. Bonderbility는 무전해 니켈/금도금의 안정성을 평가하기 위해 gold wire 또는 solder ball 테스트로 실험하였다.

• 폴리머
• /
• 제31권5호
• /
• pp.410-416
• /
• 2007

무유화제중합으로 제조된 폴리(메틸 메타크릴레이트) (PMMA) 시드 고분자 미립자에 가교단량체인 HDDA (1,6-hexanediol diacrylate), triEGDMA [tri(ethylene glycol) dimethacrylate] 또는 triEGDMA와 EGDMA (ethylene glycol dimethacrylate)의 혼합액을 흡수시키고, 이를 중합하여 단분산 가교고분자 미립자를 제조할 시 1) 흡수된 가교단량체와 시드 고분자 미립자의 중량비(흡수율) 변화, 2) 가교단량체의 변화, 3) 무전해 니켈도금 및 4) 무전해 (니켈/금)도금에 따른 단분산 가교고분자 미립자의 기계적 물성인 탄성복원율, 압축탄성률, 파괴강도 및 파괴변형률의 변화를 MCT(micro compression test)를 사용하여 측정하였다. 이번 연구를 통해 가교단량체의 흡수율 증가는 가교고분자 미립자의 파괴강도에만 큰 영향을 미쳤으나, 가교고분자 미립자의 무전해 도금은 도금분체의 탄성복원율 및 파괴강도는 감소시키나, 파괴변형률의 경우에는 거의 영향을 미치지 않으며, 압축탄성률의 경우는 $K_{10}$ 및 $K_{20}$는 크게 증가시키나, $K_{30}$ 이후에는 거의 영향을 미치지 못함을 알 수 있었다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.350-355
• /
• 2009

The crysralline silicon solar cell where the solar cell market grows rapidly is occupying of about 85% or more high efficiency and low cost endeavors many crystalline solar cells. The fabricaion process of high efficiency crystalline silicon solar cells necessitate complicated fabrication processes and Ti/Pd/AG contact, This metal contacts have only been used in limited areas in spite of their good srability and low contact resistance because of expensive materials and process. Commercial solar cells with screen-printed solar cells formed by using Ag paste suffer from loe fill factor and high contact resistance and low aspect ratio. Ni and Cu metal contacts have been formed by using electroless plating and light-induced electro plating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposit the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 16.446 % on 0.2~0.6${\Omega}$ cm, $20{\times}20mm^2$, CZ(Czochralski) wafer.

• 한국표면공학회지
• /
• 제43권2호
• /
• pp.111-120
• /
• 2010

In this study, the effects of multi-complex agents addition on characteristics of electroless Ni plating solution are investigated. The species and the concentration of complexing agents are major factors to control the deposition rate, P concentration, and surface morphology of plating films. Adipic acid increases the deposition rate in regardless of single- or mutli-complex agent addition. However, lactic acid effectively increases the deposition rate in case of multi-addition as the complex agents with adipic or sodium succinate acid. In addition, sodium citric acid and malic acid show good stabilizing effects of plating solution and lowering the deposition rate, because they have high complexibility. Therefore, it is suggested that the development of Ni-P plating solution suitable for diverse usages can be carried out systematically using the database from this study.

• 한국표면공학회지
• /
• 제48권4호
• /
• pp.149-157
• /
• 2015

We investigated the effects of the fabric structure or the kinds of plated metals on the electromagnetic interference shielding effectiveness (EMI SE) by means of electroless plating on polyester fabric. We found that the weight of deposited metal, EMI SE, and flexibility of the conductive fabric for EMI shield is affected by morphology of fabric and structure of fiber. The EMI SE of conductive fabric plated Ni/Cu/Ni by electroless plating method on draw textured yarn (DTY) polyester was in the practically useful range of above 70 dB over a wide frequency range of 10 MHz to 1.0 GHz at the surface resistivity of $0.05{\Omega}/{\square}$. Au or Ag plated conductive fabric by immersion plating method is not able to provide for a good EMI SE.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.263-271
• /
• 2003

Optimal conditions of electroless nickel plating in acid baths has been studied for industrial applications of a developed EN solution. The phosphorus content in the deposition ranges from 8 to $12\;wt.\%$. The investigated EN plating parameters are ion concentrations of nickel and hypophosphite, concentration of reducing and complexing agent, temperature, and pH. The average plating rate of Ni-P deposition was ca. $14{\mu}m/h$. The EN solution used shows a deposition rate of $10{\mu}m/h$ up to seven metal turnovers.

• 한국표면공학회지
• /
• 제23권4호
• /
• pp.208-217
• /
• 1990

Electroless Ni-Cu-P plating was performed was performed to investigate for plating and changes in microhardness and corrosion rate of of electroless deposits depending on heat treatment. The activation energy for $75~85^{\circ}C$ were calculated to be 66.7KJ/mole. Plating rate increased to 34% with addition of 200ppm of NaF and 0.8ppm of thiourea to the bath. The highest hardness value was obtained by heat treatment deposits layer at$ 400^{\circ}C$, 1 hour. The increase in hardness of deposits by heating was confirmed to be associated with crystallization of the amorphous deposits. Corrosion resistance of deposir layer, which had been heated up to $300^{\circ}C$, was found to be exellent when immersed in 1N-H2SO4 solution, Change of the corrosion resistance seems to have some important bearing on content of amorpous, Ni3P and Cu3P.

• 한국표면공학회지
• /
• 제19권3호
• /
• pp.109-120
• /
• 1986

The electroless nickel plating on high alumina ceramics was performed in the bath containing nickel chloride, sodium hypophosphite and mono- or bi-carboxylic acid as a complexing agent in order to examine the empirical rate law as well as the effects of the complexing agent, plating temperature and pH on the rate of deposition. Adding the carboxylic acid to the plating bath, the rate of deposition was increased considerably, and each of the complexing agents showed a maximum deposition rate plateau around a particular concentration of the complexing agent. The rate of deposition was increased with increasing either temperature or pH, but microstructure of the surface became more rough. Furthermore, empirical rate law of the elecltroless nickel deposition on high alumina ceramics was discussed with the activation energy and other rate parameters calculated.