• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.83-89
• /
• 1996

The electrochemical spike oscillations at the nickel (Ni) electrode/(0.05M KHC$_{8}$H$_{4}$O$_{4}$) buffer solution (pH 9) interface have been studied using voltammetric and chronoamperometric methods. The nature of the periodic cathodic current spikes is the activation controlled currents due to the hydrogen evolution reaction and depends onthe fractioanl surface coverage of the adsorbed hydrogen intermediate or the cathodic potential. There is two kinds of the waveforms corresponding to two kinds of the cathodic current spike oscillations. The widths, periods, and amplitudes of the cathodic current spikes are 4 ms or 5ms, 151 ms or 302 ms, and < 30 mA or < 275 mA, respectively. The fast discharge and recombination reaction steps are 1.5 times and twice and faster than the slow discharge and recombination reaction steps. The fast and slow discharge and recombination reaction steps are 1.5 times and twice faster than the slow discharge and recombination reaction steps. The fast and slow discharge and recombination reactions corresponding to the fast and slow adsorption sites at the Ni cathode.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.181-189
• /
• 2002

A series of multicomponent $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{1-x}Fe_{x}$ (x=0.00, 0.08, 0.15, 0.22, and 0.30) alloys are prepared and their oystal structure and P-C-T curves are examined. The electrochemical properties of these allqys such as activation conditions, discharge capacity, cycling performance are also investigated. $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{1-x}Fe_{x}$ (x=0.00, 0.08, 0.15, 0.22 and 0.30) have the C14 Laves phase hexagonal structure. The electrode was activated by the hot-charging treatment. The best activation conditions were the current density 120 mA/g and the hot-charging time 12h at $80^{\circ}C$ in the case of the alloy with x=0.00. The discharge capacity increased rapidly until the fourth cycle and then decreased. The discharge capacity increased again from the 13th cycle, arriving at 234 mAh/g at the 50th cycle. The discharge capacily just after activation decreases with the increase in the amount of the substituted Fe but the cycling performance is improved. The discharge capacity after activation of the alloy with x=0.00 is 157 mAh/g at the current density 120 mA/g. $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}Fe_{0.15}$ is a good composition with a medium quantity of discharge capacities and a good cycling performance. The ICP analysis of the electrolyte for these electrodes after 50 charge-discharge cycles shows that the concentrations of V and Zr are relatively high. Another series of multicomponent $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}M_{0.15}$ (M = Fe, Co, Cu, Mo and Al) alloys are prepared. They also have the C14 Laves phase hexagonal structure. The alloys with M = Co and Fe have relatively larger hydrogen storage capacities. The discharge capacities just after activation are relatively large in the case of the alloys with M = Al and Cu. They are 212 and 170 mAh/g, respectivety, at the current density 120mA/g. The $Zr_{0.8}Ti_{0.2}Mn_{0.4}V_{0.6}Ni_{0.85}Co_{0.15}$ alloy is the best one with a relatively large discharge capacity and a good cycling performance.

• 대한물리치료과학회지
• /
• 제10권2호
• /
• pp.96-103
• /
• 2003

The purpose of this study was to assess the effect of applied pressure to abdomen on lumbar and abdominal muscle activation during upper limb exercise. The experimental group consisted of twenty-seven healthy male subjects (mean age=$22.40{\pm}2.19years$, mean height=$175.30{\pm}2.19cm$, mean weight= $67.67{\pm}7.44kg$, RM=$8.43{\pm}2.76kg$). In each different pressure condition (OmmHg, 30mmHg, 70mmHg, 100mmHg), upper limb exercise was performed in total of 10 trials with 10 RM dumb-bell exercise. Lumbar and abdominal muscle activity was measured using surface bipolar electrode electromyography(EMG). EMG activity was measured from upper rectus abdominis, external oblique abdominis, internal oblique abdominis, and elector spinae. The raw EMG signal was processed into the root mean square(RMS). All RMS EMG data were normalized and express as a percentage of the EMG(%EMG). Collected data were statistically analyzed by SPSS/PC Ver 10.0 using two-way analysis of variance for repeated measures($4{\pm}3$) and Bonferroni post hoc, test. Lumbar and abdominal muscle activation was significantly increased when 100 mmHg was applied(p<.05). Upper rectus abdominis activation was significantly increased compared as other muscles activation(p<.05). However, there were no interaction between pressure and muscles(p>.05). The findings of this study can be used as a fundamental data when lumbar orthosis is applied and external pressure can be used as a therapeutic tool.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.330-334
• /
• 2005

고분자 전해질막 연료전지는 운전시 정상적인 성능을 발현하기 이해서 전지 본체 조립 후 초기 활성화 운전이 필요하다. 이러한 활성화 운전을 통해 전해질 사이의 수소이온이동 통로, 반응가스가 반응할 수 있는 촉매까지의 이동 통로, 촉매층내의 전기적 연속성을 확보함으로 연료전지는 최적의 성능을 나타낼 수 있다. 본 연구를 통해 연료전지 활성화에 영향을 미치는 요인을 찾았고, 이를 통해 효과적이고 빠른 활성화 절차에 관한 연구를 수행하였다.

• 신재생에너지
• /
• 제1권2호
• /
• pp.34-40
• /
• 2005

고분자 전해질막 연료전지는 운전시 정상적인 성능을 발현하기 위해서 전지 본체 조립 후 초기 활성화 운전이 필요하다. 이러한 활성화 운전을 통해 전해질 사이의 수소이온이동 통로, 반응가스가 반응할 수 있는 촉매까지의 이동 통로, 촉매층내의 전기적 연속성을 확보함으로 연료전지는 최적의 성능을 나타낼 수 있다. 본 연구를 통해 연료전지 활성화에 영향을 미치는 요인을 찾았고, 이를 통해 효과적이고 빠른 활성화 절차에 관한 연구를 수행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.94.2-94.2
• /
• 2011

In this work, multi-functional groups, i.e., nitrogen and oxygen, contained microporous carbons (MF-MCs) were prepared by the one step carbonization of the poly(vinylidene chloride-co-acrylonitrile-co-methyl methacryalte) (PVDC-AN-MMA) without activation. The electrochemical performance of MF-MCs was investigated as a function of carbonization temperature. It was found that MF-MCs had a high specific surface area over $800m^2/g$ without additional activation, resulting from the micropore's formation by the release of chlorine groups. In addition, although functional groups decreased, specific surface area was increased with increasing carbonization temperature, leading to the enhanced electrochemical performance. The pore size of the carbon distributed mainly in small micropore of 1.5 to 2 nm, which was idal for aqueous electrolyte. Indeed, the unique microstructure features, i.e. high specific surface area and optimized pore size provided high energy storage capability of MF-MCs. These results indicated that the microporous features of MF-MCs lead to feasible electron transfer during charge/discharge duration and the presence of nitrogen and oxygen groups on the MF-MCs electrode led to a pseudocapacitive reaction.

• Bulletin of the Korean Chemical Society
• /
• 제21권6호
• /
• pp.571-576
• /
• 2000

Electrocatalytic effects for the reduction of thionyl chloride in $LiAICI_4/SOCl_2$ electrolyte solution containing Schiff base M(II) (M; Co and Fe) complexes are evaluated by determining kinetic parameters with cyclic voltammetry and chronoamperometry at a glassy carbon electrode. The charge transfer process during the reduction of thionyl chloride is affected by the concentration of the catalyst. The catalytic effects are demonstrated from both a shift of the reduction potential for the thionyl chloride toward a more positive direction and an increase in peak currents. Catalytic effects are larger in thionyl chloride solutions containing the binuclear [M(II) $_2$ (TSBP)] complex rather than mononuclear [M(II)(BSDT)] complexes. Significant improvements in the cell performance have been noted in terms of both thermodynamics and activation energy for the thionyl chloride reduction. The activation energy calculated from the Arrhenius plots is 4.5-5.9 kcal/mole at bare glassy carbon electrodes. The activation energy calculated for the catalyst containing solution is 3.3-4.9 kcalmole, depending on whether the temperature is lowered or rasied.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2003년도 추계학술발표회초록집
• /
• pp.134-135
• /
• 2003

The dental implant materials required good mechanical properties, such as fatigue strength, combined with a high resistance to corrosion. For increasing fatigue resistance and delaying onset of stress corrosion cracking, shot peening has been used for > 50 years to extend service life of metal components. However, there is no information on the electrochemical behavior of shot peened and hydroxyapatite(HA) coated Ti-6Al-4V alloys. To increase fatigue strength, good corrosion resistance, and biocompatibility, the electrochemical characteristics of Ti/TiN/HA coated and shot peened Ti-6Al-4V alloys by electron beam physical vapor deposition(EB-PVD) have been researched by various electrochemical method in 0.9%NaCl. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. The produced materials were quenched at 1000$^{\circ}C$ under high purity dried Ar atmosphere and were hold at 500$^{\circ}C$ for 2 hrs to achieve the fatigue strength(1140㎫) of materials. Ti-6Al-4V alloys were prepared under the condition of hydrogen and vacuum arc furnace. Shot peening(SP) and sand blasting treatment was carried out for 1, 5, and 10min. On the surface of Ti-6Al-4V alloys using the steel balls of 0.5mm and alumina sand of 40$\mu\textrm{m}$ size. Ti/TiN/HA multilayer coatings were carried out by using electron-beam deposition method(EB-PVD) as shown Fig. 1. Bulk Ti, powder TiN and hydroxyapatite were used as the source of the deposition materials. Electrons were accelerated by high voltage of 4.2kV with 80 - 120mA on the deposition materials at 350$^{\circ}C$ in 2.0 X 10-6 torr vacuum. Ti/TiN/HA multilayer coated surfaces and layers were investigated by SEM and XRD. A saturated calomel electrode as a reference electrode, and high density carbon electrode as a counter electrode, were set according to ASTM GS-87. The potentials were controlled at a scan rate of 100 mV/min. by a potentiostat (EG&G Co.273A) connected to a computer system. Electrochemical tests were used to investigate the electrochemical characteristics of Ti/TiN/HA coated and shot peened materials in 0.9% NaCl solution at 36.5$^{\circ}C$. After each electrochemical measurement, the corrosion surface of each sample was investigated by SEM.

• 폴리머
• /
• 제36권2호
• /
• pp.169-176
• /
• 2012

저항형 습도센서의 개발을 위하여 스크린 인쇄방법으로 glass epoxy(GE) 기재 위에 핑거의 수와 그 사이의 간격이 다른 여러 가지 바이트형의 금 전극을 제조하였다. 전극의 기본적인 구조는 핑거 수가 3, 4 및 5를 가지며 간격은 각각 310과 460 ${\mu}m$이다. 전극은 처음에 은 나노 페이스트로 전극 패턴을 인쇄하고 연속적으로 Cu, Ni 및 Au를 무전해 도금을 진행하여 제조하였다. 감습성 고분자 전해질은 [2-(methacryloyloxy)ethyl] dimethyl benzyl ammonium chloride(MDBAC)과 methyl methacrylate(MMA)의 공중합체를 사용하였으며 스크린 인쇄 방법으로 Au 전극/GE 기재 위에 인쇄하였다. 이렇게 제조된 습도 센서의 20-95%RH 영역의 상대습도 대 로그 임피던스 그래프에서 좋은 직선성을 보여주었으며 히스테리시스는 1.5%RH 이하 및 75초의 응답 및 회복 속도를 보여주었다. 전극의 구조는 고분자 저항형 습도센서의 감습특성에 큰 영향을 미치며 전해질 고분자와 전극 사이의 활성화 에너지, 온도의존성, 감도, 직선성 및 히스테리시스와 같은 감습특성 등의 차이를 비교하였고 특히 이온의 이동에 관여하는 활성화 에너지 및 온도 의존성에 큰 영향을 미쳤다.

• 폴리머
• /
• 제36권6호
• /
• pp.739-744
• /
• 2012

본 연구에서는 합성한 styrene-acrylonitrile(SAN) 전구체를 기반으로 한 탄소를 제조하였다. 그 제조된 탄소는 화학적 환원법으로 활성화하였고, 그 활성화된 SAN 기반 탄소를 A-SAN이라 명명하였다. 전기이중층 커패시터의 전극용 A-SAN 기반 탄소의 표면 특성과 전기화학적 특성에 있어서 활성화 온도에 의한 효과를 확인하기 위해 다양한 온도에서 활성화를 진행하였다. A-SAN의 특성분석을 위해 X-선 회절분석법(XRD), 주사전자현미경(SEM) 그리고 비표면적 장치에 의해 조사되었다. 또한 전기화학적 거동은 순환전류전압과 정전류 충방전법으로 측정하였다. 그 실험 결과로부터, A-SAN 700이 우수한 전기화학적 특성과 가장 높은 비축전용량 값을 보였지만, 활성화 온도가 $700^{\circ}C$가 넘으면 이러한 특성들은 감소했다. 이것은 $700^{\circ}C$ 이상의 온도에서의 활성화가 마이크로 기공 구조의 변형을 야기하기 때문인 것으로 사료된다.