• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.167-173
• /
• 2013

A series of highly efficient red phosphorescent heteroleptic iridium(III) complexes 1-6 containing two cyclometalating 2-(2,4-substitued phenyl)quinoxaline ligands and one chromophoric ancillary ligand were synthesized: (pqx)$_2Ir$(mprz) (1), (dmpqx)$_2Ir$(mprz) (2), (dfpqx)$_2Ir$(mprz) (3), (pqx)$_2Ir$(prz) (4), (dmpqx)$_2Ir$(prz) (5), (dfpqx)$_2Ir$(prz) (6), where pqx = 2-phenylquinoxaline, dfpqx = 2-(2,4-diflourophenyl)quinoxaline, dmpqx = 2-(2,4-dimethoxyphenyl)quinoxaline, prz = 2-pyrazinecarboxylate and mprz = 5-methyl-2-pyrazinecarboxylate. The absorption, emission, electrochemical and thermal properties of the complexes were evaluated for potential applications to organic light-emitting diodes (OLEDs). The structure of complex 2 was also determined by single-crystal X-ray diffraction analysis. Complex 2 exhibited distorted octahedral geometry around the iridium metal ion, for which 2-(2,4-dimethoxyphenyl)quinoxaline N atoms and C atoms of orthometalated phenyl groups are located at the mutual trans and cis-positions, respectively. The emission spectra of the complexes are governed largely by the nature of the cyclometalating ligand, and the phosphorescent peak wavelengths can be tuned from 588 to 630 nm with high quantum efficiencies of 0.64 to 0.86. Cyclic voltammetry revealed irreversible metal-centered oxidation with potentials in the range of 1.16 to 1.89 V as well as two quasi-reversible reduction waves with potentials ranging from -0.94 to -1.54 V due to the sequential addition of two electrons to the more electron-accepting heterocyclic portion of two distinctive cyclometalated C^N ligands.

• 한국수소및신에너지학회논문집
• /
• 제3권2호
• /
• pp.25-33
• /
• 1992

With the aim to obtain $TiO_2$ films with an increased photorespones and absorbance in the visible region of the solar spectrum, the direct oxidation of titanium alloys were performed. In this study, $Ti-Ga_2O_3$ alloy was prepared by mixing, pressing and arc melting of appropriate amounts of titanium and $Ga_2O_3$ powder. Electrochemical measurements were performed in three electrode cell using electrolyte of 1M NaOH solution. The oxide films on $Ti-Ga_2O_3$ alloy was composed of $Ti_2O$, TiO, $TiO_2$, $Ga_2TiO_5$. The free energy efficiency (${\eta}e$) of $Ti-Ga_2O_3$ oxide films had 0.8~1.3 % and were increased with the increase of $Ga_2O_3$ content up to 10wt %. The onset potential ($V_{on}$) had -0.8V~0.9V ranges and were shifted to anodic direction with the increase of $Ga_2O_3$ content. The spectral response of Ti-$Ga_2O_3$ oxides were similar to the response of the $TiO_2$ and their $E_g$ were observed to 2.90~3.0eV. Variations of onset potential($V_{on}$) associated with electrolyte pH were -59mV/pH. This probably reflects the nature of the bonding of $OH^-$ ion to the $TiO_2$ surface, a common phenomena in the transition-metal oxides.

• 멤브레인
• /
• 제27권3호
• /
• pp.205-215
• /
• 2017

고분자 분리막은 가격이 저렴하고, 쉽게 제조가 가능하며, 투과도와 선택도가 우수하여 수처리 분야뿐만 아니라 기체분리에서도 중요한 역할을 한다. 하지만, 고분자 분리막은 일반적으로 투과도와 선택도의 역상관 관계를 나타내는 단점이 있다; 즉, 투과도가 높으면 선택도가 낮고, 선택도가 높으면 투과도가 높다. 이러한 단점을 극복하기 위한 방안 중의 하나가 촉진수송이다. 지난 수십 년간 촉진수송 이론은 촉진수송 분리막 제조에 있어 매우 중요하고 다양한 모델을 제시하는 데에 핵심적인 역할을 하였다. 한편, 촉진수송에서 주된 역할을 하는 운반체의 특성, 매질의 유동성 및 고분자 복합체의 물리화학적 성질 등을 이해하는 것은 중요하다. 운반체의 유동성에 따라 촉진수송 분리막의 종류를 3가지로 나눌 수 있다; 즉, 이동상 운반체 분리막, 준이동상 운반체 분리막, 고정상 운반체 분리막. 또한 촉진 운반체가 특정물질과 상호작용하는 데에는 4가지 종류의 가역반응으로 나눌 수 있다; 즉, 수소원자 전달 반응, 친핵성 첨가반응, 파이-착체 반응, 그리고 전기화학 반응. 이러한 촉진수송 분리막은 이산화탄소, 산소, 올레핀(프로필렌, 에틸렌)의 투과도를 선택적으로 향상시키는 역할을 한다. 이와 같이 본 총설에서는 다양한 촉진수송 분리막에 관련된 주요 연구내용과 이러한 연구를 수행하는 대표적인 전략들을 소개하고자 한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• Journal of Plant Biology
• /
• 제38권1호
• /
• pp.87-93
• /
• 1995

최근에 Synechocystis sp. PCC 6803 중에 한 균주가 고체 한천 배지상에서 일정한 조명(300-1000 lux) 방향을 따라 활주 운동하는 것을 관찰하여 이 종을 S. 6803 PTX라고 명명하고 이의 주광성 운동에 대한 생리학적 특징을 이해하기 위하여 몇 가지 대사 억제제와 신호 전달 차단제의 주광성 운동에 미치는 효과를 조사하였다. DCMU는 광계 II로부터 광계 I의 일차 전자 수용체인 플라스토퀴논으로의 비순환성 광합성 전자전달을 억제하는 억제자로서 $100\;\mu\textrm{M}$의 농도에서는 주광성 운동을 억제하지 못하였다. 그러나 호흡에 의한 전자전달 억제제인 sodium azide를 처리하였을 경우에는 S. 6803 PTX에서 심하게 장해를 받았다. 이러한 관찰 결과는 주광성 운동의 주동력원이 광인산화 과정보다는 호흡에 의한 산화적인 인산화과정에 주로 연관되어 있음을 보여주었다. 또한, 세포를 CCCP나 DNP와 같은 막상의 uncoupler를 처리하였을 때, 세포내 ATP 농도를 저하시키거나 세포질막에 수소 이온의 전기화학구배($\Delta\mu_{H}+$)를 제거시키나, 이러한 화합물들은 주광성 운동에 뚜렷한 영향은 주지 못하였다. 이러한 결과와는 달리, H+-F0F1 ATPase에 민감하게 억제 작용을 나타내는 DCCD나 NBD의 처리는 세포내 ATP만 고갈시키고 막상에서 $\Delta\mu_{H}+$는 그대로 유지시키는 작용을 하는데, 이러한 DCCD나 NBD는 주광성 운동에 대해서는 심하게 억제 현상을 나타내었다. 또한, 특이성 calcium ionophore 중의 하나인 A23187의 처리는 양성 주광성에 심하게 장해를 주었다. 아마도 Ca2+ 유동은 주광운동 방향성의 신호전달 과정에 중요하게 관련되어 있는 것으로 나타났다. 마지막으로 S-adenosyl methionine과 같은 메틸 공여체의 고갈이 S. 6803 PTX 균주의 주광성 반응에 영향을 주는지를 알아보기 위하여 에티오닌을 BG11을 한천 배지에 첨가하였다. 이 생물종의 광운동은 에티오닌의 농도가 증가됨에 따라 일정하게 억제되다가 0.5mM에서 주광성 운동을 완전히 억제시켰다. 이것은 광수용 기작이 Escherichia coil나 Salmonella typhimurium에서 발견된 메틸기 수용 주화성 단백질과 같은 메틸화/탈메틸화 과정에 의하여 조절될 가능성을 보여주고 있음을 의미한다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.390-396
• /
• 2012

In order to understand the nature of dendritic zinc growth, electrochemical zinc redox reaction on nickel plate was investigated in aqueous solutions containing different concentrations, 0.2, 0.1 and 0.02 $mol{\cdot}dm^{-3}$ (M), of zinc sulfate ($ZnSO_4$) or zinc chloride ($ZnCl_2$). Zinc ion was efficiently reduced and oxidized on nickel in the high-concentration (0.2 M) solution, whereas relatively poor efficiency was obtained from the other low-concentration solutions (0,1 and 0.02 M). Cyclic voltammetry (CV) analysis revealed that the 0.2 M electrolyte solution decomposes at more positive potentials than the 0.1 and the 0.02 M solutions. These results suggested that the concentration of electrolyte solution and anion would be an important factor that suppresses the reaction of the zinc dendrite formation. Scanning Electron Microscopy (SEM) data revealed that the shape of dendritic zinc and its growing behavior were also influenced by electrolyte concentration.