• 제목/요약/키워드: electro

검색결과 6,455건 처리시간 0.039초

Ni-Zn-Cu ferrite DVB-H antenna

  • Bae, Seok;Kim, In-Young;Hong, Yang-Ki
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
    • /
    • pp.273.1-273.1
    • /
    • 2007
  • PDF

M-Zn (M = Sb, V, and Nb) Substituted Strontium Hexaferrites with Enhanced Saturation Magnetization for Permanent Magnet Applications

  • Sapoletova, Nina;Kushnir, Sergey;Ahn, Kyunghan;An, Sung Yong;Choi, Moonhee;Kim, Jae Yeong;Choi, Changhak;Wi, Sungkwon
    • Journal of Magnetics
    • /
    • 제21권3호
    • /
    • pp.315-321
    • /
    • 2016
  • M-Zn (M = Sb, V, Nb) substituted M-type strontium hexaferrites were prepared by a ceramic method. The phase composition, morphology and magnetic properties were studied by x-ray diffractometry, scanning electron microscopy and vibrating sample magnetometry. Saturation magnetization increases with a substitution up to 75.0 emu/g (2.5 % higher compared to unsubstituted hexaferrite) and then decreases with a further substitution. A coercive field of substituted hexaferrite powders with highest saturation magnetization is more than 3 kOe. Substituted strontium hexaferrite powders prepared in this work are a rare example of high $M_S$ compositions without doping rare-earth elements and would be a promising candidate for a permanent magnet application.

Sputtering yield and defect energy level characteristics MgO protective layer according to $O_2$ partial pressure in AC-PDPs

  • Jung, S.J.;Son, C.G.;Song, K.B.;Cho, S.H.;Oh, H.J.;Cho, G.S.;Kang, S.O.;Choi, E.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1384-1387
    • /
    • 2007
  • We have investigated the sputtering and secondary electron emission characteristics of MgO protective layer according to the $O_2$ partial pressure. The MgO layer have been deposited by electron beam evaporation method and have varied the $O_2$ partial pressure as 0, $5.2{\times}10^{-5}$, $1.0{\times}10^{-4}$, and $4.1{\times}10^{-4}$ Torr. It has been known that the secondary electron emission coefficient and the number of defect energy levels increased as the $O_2$ partial pressure increases. So we have investigated the property of sputtering yield according to the $O_2$ partial pressure. We have known that the sputtering yield deceases as the $O_2$ partial pressure increases by using the FIB system.

  • PDF

도전사를 이용한 UHF RFID 다이폴 태그 안테나 설계 (UHF RFID Dipole Tag Antenna Design Using Flexible Electro-Thread)

  • 김연호;정유정
    • 한국전자파학회논문지
    • /
    • 제19권1호
    • /
    • pp.1-6
    • /
    • 2008
  • 전도성의 도전사를 이용해서 UHF 대역의 입을 수 있는 T-정합 다이폴 형태의 RFID Tag 안테나를 디자인하였다. 도전사를 꼬아 만드는 실의 수에 따라 도전율을 측정하여, 그 값을 시뮬레이션에 적용하여 정확한 결과를 유도하였다. 기존의 구리 기판이니 구리 테이프를 사용한 Inlay 형태나 패치 형태의 RFID 태그가 아닌 의류의 특성상 착용감, 구부러짐 변화에도 문제점이 없이 구부러질 수 있는 도전사를 사용하였다. 제작한 RFID 태그안테나의 성능을 검증하기 위하여 안테나를 제작하고 반사 손실, 인식 거리 패턴 등을 측정하였다. 제작된 태그안테나의 인식 거리를 측정하였고, 약 2.4m의 인식 거리를 가지는 것을 확인하였다

고전압 하전방식 hydrocarbon 센서의 전기화학적 특성연구 (A study of electrochemical characteristics for high voltage electric charge type hydrocarbon sensor)

  • 홍지태;전영갑;김정훈;서현웅;김호성;이동길;이경준;손민규;김희제
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1358-1359
    • /
    • 2008
  • HC(hydrocarbon)센서는 최근 내연기관의 과도상태의 연소 효율 및 배기가스 저감 효율을 높이기 위하여 산소센서와 함께 연소제어 분야에서 많이 사용되고 있다. 현제 HC센서는 전기화학식 및 current limiting 방식을 많이 사용하고 있으며 이는 HC가스의 이온화를 유도하는 촉매를 매질로 하는 전기화학식 센서이다. 이러한 촉매의 경우 장기 사용 시 촉매의 열화 및 변형 등으로 신뢰도가 떨어지게 된다. 본 논문에서는 촉매를 이용하지 않고 HC 가스의 이온화를 위하여 고전압 하전방식의 hydrocarbon센서를 고안하였으며[1], 여러 배출가스를 통한 센서의 전기화학적 성능을 분석하였고 온도 및 HC성분에 따른 전류치 변화를 이용하여 이론적 계산식을 제안하였다.

  • PDF

Hybrid Sol을 이용한 박막 유전체 제작 (Fabrication of Thin Film Dielectric by Hybrid Sol)

  • 김용석;유원희;장병규;오용수
    • 한국재료학회지
    • /
    • 제17권4호
    • /
    • pp.185-191
    • /
    • 2007
  • The purpose of this study is to evaluate the thin fihn dielectric made of hybrid sol, which consist of barium titanate powder, polymeric sol and other polymers. This sol will be used dielectric applied to small, thin electric passive components such as MLCC(Multi Layer Ceramic Condenser), resister, inductor. This sol is composed of mixed fine barium titanate powder and polymeric sol including Ba, Ti-precursor, solvent, chelating agent, chemical reaction catalyst, the additive sols to improve fired densification and temperature reliability. First at all, we mixed hybrid sol to be dispersed and be stabilized by ball milling for 24hrs. By spin coating method, we makes thin film dielectric on the convectional green sheet for MLCC. After heat treatments, we analyzes the structure morphology, physical, electrical properties and X5R Temperature properties.