• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.183-183
• /
• 2007

Bimodal Tram is a new public transportation system combined subway with bus and consists of variable electric equipment to accomplish the comfortness, reliability, safety and so on. One of them is VCU(Vehicle Control Unit) for Performing driver's cmmand and monitoring the state of other equipment. To lessen the wiring and the interference of outer electromagnetic noises is very important things for bimodal tram with complicated configuration of electric equipments. This paper has investigated the application of CAN(Controller Area Network) communication method for VCU which has display, central unit and several nodes that are connected with other electric equipments(HVAC, door controller etc). We designed and manufactured the prototype of VCU which eventually will be installed on bimodal tram being developed in KRRI at present.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.518-519
• /
• 2017

사물인터넷(IoT) 기술의 발달로 인하여 간단한 개인 장비에서부터 다양한 산업장비에까지 IoT 기술을 접목해 나가고 있으며, 유체 및 기타 동작을 단속할 수 있는 밸브에까지 다양하게 접목해 나가고 있다. 현재 국내의 소규모 회사에서 DCM(Deep Cement Mixing Method) 공법에 사용되는 장비의 동작 특성인 시멘트 흐름을 단속할 수 있는 고온/고압에 견딜 수 있는 밸브를 제작하고 판매하고 있다. 그러한 특수한 밸브 시스템에 사물인터넷(IoT) 기술을 접목하여 작동되는 밸브를 원격으로 관리할 수는 원격지 관리시스템 및 간단한 밸브 상태계측 모듈을 연구개발하여 적용 가능성을 검토하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.853-858
• /
• 2010

DRAM package substrate has been demonstrated using a thick alumina layer produced by aluminum anodization process. To apply a transmission-based design methodology, 2 dimensional electromagnetic simulation is performed. The design parameters including signal line width/spacing and alumina's thickness are optimized based on the simulation analysis and are verified with the fabrication and the measurement of the test patterns on the anodic alumina substrate. DDR2 DRAM package is chosen as a design vehicle. Aluminum anodization technique has been applied successfully to fabricate new DRAM package substrate.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.505-506
• /
• 2015

In this paper, two types of switched reluctance motors (SRMs) with segmental rotors are presented in detail. One is 6/5 segmental rotor type; the other is 12/8 segmental rotor type. Both motors have the same stator, rotor and winding configurations. The stator is constructed with special stator poles in which the exciting and auxiliary poles are designed exclusively. The rotor is constructed from a series of discrete segments, each of which is embedded in the magnetic isolator. The windings are only wound on the exciting poles, and no windings are wound on the auxiliary poles. These structures result in short flux path and high flux-linkage utilization in the proposed motors, which may reduce the magneto motive force (MMF) requirement and increase the electrical utilization of the machine. To verify the proposed two structures, the characteristics of the proposed two types are analyzed and compared with that of conventional 12/8 SRM.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1472-1473
• /
• 2007

In this paper, it is investigated to develop a compact 150kJ pulsed power supply to be operated on a vehicle. The goals of development are the maximum charging energy of 150kJ, the efficiency of energy transfer of >80%, the pulse forming of trapezoidal wave of $150{\sim}250MW$, the consecutive charging rate of >several shots/min. The hierarchy and circuit of the pulsed power supply for optimization, high efficiency and minimization of volume are investigated and presented. And, the charging voltage, inductance and resistance of the compact pulsed power supply are studied and determined.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1017-1018
• /
• 2007

Interior permanent magnet synchronous motor (IPMSM) for traction motor in the hybrid electric vehicle (HEV) has different parameters and characteristics according to pole and slot combinations. The fitting combination of pole and slot in the IPMSM improves characteristics of traction system ultimately. This paper deals with analyzing the characteristics of IPMSM for mild type HEV according to pole and slot combinations. Based on the result of characteristics, suitable pole and slot combination is presented to maximize efficiency of traction motor in the HEV system.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1173-1174
• /
• 2007

The project of advanced urban transit system development is developing the advanced vehicle and the core technologies for the cost down by system change, the transport safety and the environmental friendliness and the improvement of passenger service. The product data management system is installed for management of each project. Various data and informations producted from each project are made for database. Therefore, we develop the product data management system.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1773-1774
• /
• 2007

본 논문은 AGVS(Automated Guide Vehicle System)가 여러 작업환경 및 변경 시 좀더 유연하게 대응할 수 있도록 작업환경 내에서 AGVS에 필요한 작업공간요소로 분류하고 이들을 모델링하는 방법을 제안하였다. 또한, 최단경로 생성 시 $A^*$ 알고리즘에서의 평가함수 선정 방법과 최단경로 상에 존재하는 경로의 충돌 모델을 제안하였으며 시뮬레이션을 통해 제안한 방법을 증명하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1177-1178
• /
• 2007

There is a possibility of saying that the accident of urban transit vehice or deficit operation is caused by the m.aintenance. urban transit vehice where the efficiency is good though does the time passes and it becomes old anger and does not display that efficiency not only the cause of formation accident does becomes. The breakdown about under occurring before getting up an accident, appropriately shifting the parts is to a maintenance very the pending question fact which is important is a possibility of doing. From there is by an urban transit vehice, Mauntenance in reliability base grudge is a tool of confirms an improvement point and the place where it judges. From the research which it sees will present about technical development plan of Maintenance.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.291-295
• /
• 2005

This paper presents the modeling of grounding system on Korean electric railway system. The system model is composed of the catenary system, the grounding-system, the sub-sectioning post, the fault point, the sectioning post, the autotransformer in the substation, and the electric vehicle. The increment of rail-ground voltage may be thought as an amplifier of danger on human body of equipment insulation. The rail-ground voltage on steady state and on fault condition should be under standard limit voltage. To analyze grounding system for steady state and fault condition on Korean railway, modeling for each railway system is performed by 10-port network model. Modeling and analysis of present grounding-system are important to protect human and electronic equipments. The examinations for systematic grounding-system are investigated.