• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.239-246
• /
• 1999

A highly sensitive photovoltaic infrared photodiode was fabricated for detecting infrared light in $3{\sim}5\;{\mu}m$ wavelength range on InSb wafer with p-i-n structure grown by MOCVD. Silicon dioxide($SiO_2$) insulating films for the junction interface and surface of photodiode were prepared using RPCVD because InSb has low melting point and evaporation temperature. After formation of In ohmic contacts by thermal evaporation, the electrical properties of the photodiode were characterized in dark state at 77K. A product of zero-bias resistance and area($R_0A$) showed $1.56{\times}10^6\;{\Omega}{\cdot}cm^2$ that satisfied BLIP(background limited infrared photodetector) condition. When the photodiode was tested under infrared light, the normalized detectivity of about $10^{11}\;cm{\cdot}Hz^{1/2}{\cdot}W^{-1}$ was obtained. we successfully fabricated a unit cell with InSb IR array with good quantum efficiency and high detectivity.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.556-563
• /
• 2007

We carried out a laboratory scale experiment about the characteristics of chemically active species produced in hybrid gas-liquid discharges. The electrode configuration which had high voltage electrode in the gas phase and ground electrode in the liquid was utilized while high voltage electrode has been typically positioned in the liquid in other studies. Our electrode was configured in such a way as to increase the energy efficiency of chemical reactions by creating a higher electrical field strength and a narrower pulse width than the typical electrode configuration. The highest ozone concentration was obtained at 45 kV which was the medium value in operating voltages. The decrease of solution conductivity increased the resistance of liquid phase and the electric field strength through the gas phase, so ozone gene-ration rate was enhanced. The increase of voltage promoted the production rate of hydrogen peroxide by increasing the electric field strength. In a lower voltage, the increase of solution conductivity increased the degradation rate of $H_2O_2$, so the $H_2O_2$ generation rate decreased. On the other hand, the effects of UV radiation, shock waves etc. increased the $H_2O_2$ generation rate as the solution conductivity increased. A higher rate of $H_2O_2$ generation can be achieved by mixing argon to oxygen which generates a stronger and more stable discharges.

• Biomolecules & Therapeutics
• /
• v.25 no.2
• /
• pp.213-221
• /
• 2017

Baicalein, a natural flavonoid obtained from the rhizome of Scutellaria baicalensis Georgi, has been reported to have anticancer activities in several human cancer cell lines. However, its antimetastatic effects and associated mechanisms in melanoma cells have not been extensively studied. The current study examined the effects of baicalein on cell motility and anti-invasive activity using mouse melanoma B16F10 cells. Within the noncytotoxic concentration range, baicalein significantly inhibited the cell motility and invasiveness of B16F10 cells in a concentration-dependent manner. Baicalein also reduced the activity and expression of matrix metalloproteinase (MMP)-2 and -9; however, the levels of tissue inhibitor of metalloproteinase-1 and -2 were concomitantly increased. The inhibitory effects of baicalein on cell motility and invasiveness were found to be associated with its tightening of tight junction (TJ), which was demonstrated by an increase in transepithelial electrical resistance and downregulation of the claudin family of proteins. Additionally, treatment with baicalein markedly reduced the expression levels of lipopolysaccharide-induced phosphorylated Akt and the invasive activity in B16F10 cells. Taken together, these results suggest that baicalein inhibits B16F10 melanoma cell migration and invasion by reducing the expression of MMPs and tightening TJ through the suppression of claudin expression, possibly in association with a suppression of the phosphoinositide 3-kinase/Akt signaling pathway.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.861-867
• /
• 2019

$Li_4Ti_5O_{12}$ is a promising next-generation anode material for lithium-ion batteries due to excellent cycle life, low irreversible capacity, and little volume expansion during charge-discharge process. However, it has poor charge capacity at high current density due to its low electrical conductivity. To improve this weakness, porous $Li_4Ti_5O_{12}$ was synthesized by sol-gel method with P123 as chelating agent. The physical characteristics of as-prepared sample was investigated by XRD, SEM, and BET analysis, and electrochemical properties were characterized by cycle performance test, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS). $Li_4Ti_5O_{12}$ synthesized by 0.01mol ratio of P123/Ti showed most unified particle size, high specific surface area, and relatively high porosity. EIS analysis showed that depressed semicircle size was remarkably reduced, which suggested resistance value in electrode was decreased. Capacity in rate performance showed 178 mAh/g at 0.2C, 170 mAh/g at 0.5C, 110 mA/h at 5C, and 90 mAh/g at 10C. Capacity retention also showed 99% after rate performance.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.6
• /
• pp.384-395
• /
• 2018

The aim of this study was to investigate whether a novel formulation of an herbal extracts has an inhibitory effect on obesity. To determine its anti-obesity effects, we performed anti-obesity-related experiments in vitro and in vivo. Thus, our present study was carried out to evaluate the anti-obesity effect of herbal extracts using a high fat diet (HFD)-induced obese mouse model and 3T3-L1 adipose cells. The effects of each herbal extracts on lipid accumulation in 3T3-L1 cells were examined using Oil Red O staining. Results showed that treatment with each herbal extracts at $10{\sim}100{\mu}g/ml$ had no effect on cell morphology and viability. Without evidence of toxicity, herbal extracts treatment decreased lipid accumulation compared with the untreated adipocytes controls as shown by the lower absorbance of Oil Red O stain. Futhermore, compared with control-differentiated mature adipocytes, each herbal extracts significantly inhibited lipid accumulation in mature 3T3-L1 adipocytes. In the HFD-fed obese mice, body weight, liver weight and white adipose tissue weights were significantly reduced by mixture of herbal extracts administration in mouse skin. Futhermore, we found that mixture of herbal extracts administration suppressed serum triglyceride (TG), and total cholesterol (TCHO) in HFD-induced obese mouse model. The mixture of herbal extracts of permeability was estimated by measuring the transepithelial electrical resistance (TEER) value in pig skin. The optimized formulations of herbal extracts (Test 3 formulation) showed skin permeation. However, test 1 formulation containing essential oil as enhancer showed maximum skin permeation. After confirming the enhanced skin permeability, in vivo studies were performed to assess whether skin irritation potential on the basis of a primary irritation index (PII) in rabbit skin. Reactions were scored for erythema/edema reactions at 24 h, 48 h and 72 h post-application. It was concluded that the test 1 formulation was not irritation (PII = 0). The present study suggests that the test 1 formulation might be of therapeutic interest with respect to the treatment of obesity.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.4
• /
• pp.80-87
• /
• 2018

Safety issues in Li-ion battery system have been prime concerns, as demands for power supply device applicable to wearable device, electrical vehicles and energy storage system have increased. To solve safety problems, promising strategy is to replace organic liquid electrolyte with non-flammable solid electrolyte, leading to the development of all-solid-state battery. However, relative low conductivity and high resistance from rigid solid-solid interface hinder a wide application of solid electrolyte. Composite electrolytes composed of organic and inorganic parts could be alternative solution, which in turn bring about the increase of conductivity and conformal contact at physically rough interfaces. In our study, composite electrolytes were prepared by combining poly(ethylene oxide)(PEO) and $Li_7La_3Zr_2O_{12}$ (LLZO). The crystallinity, morphology and electrochemical performances were investigated with the control of LLZO contents from 0 wt% to 50 wt%. From the results, it is concluded that optimum content and uniform dispersion of LLZO in polymer matrix are significant to improve overall conductivity of composite electrolyte.

• Journal of Animal Science and Technology
• /
• v.63 no.4
• /
• pp.815-826
• /
• 2021

The objective of the current study was to investigate the effects of stocking density (SD) and dietary supplementation of vitamin C on growth performance, meat quality, intestinal permeability, and stress indicators in broiler chickens. The study was conducted using a completely randomized design with a 2 × 2 factorial arrangement consisting of 2 different SD and 2 supplemental levels of dietary vitamin C. A total of 1,368 Ross 308 broiler chickens of 21 days of age with similar body weights (BW) were randomly allotted to 1 of 4 treatments with 6 replicates each. Different numbers of birds per identical floor pen (2.0 m × 2.4 m) were used to create 2 different SD levels of low SD (9 birds/m²) and high SD (18 birds/m²). The basal diet was formulated with no supplemental vitamin C to meet or exceed nutrient recommendations of the Ross 308 manual. The other diet was prepared by supplementing 200 mg/kg vitamin C in the basal diet. The study lasted for 14 days. At the end of the study, 3 male birds per replicate were selected to analyze meat quality, intestinal permeability, and stress indicators such as blood heterophil:lymphocyte (H:L) and feather corticosterone (CORT) concentrations. Results indicated that there were no interactions between different SD and dietary supplementation of vitamin C for all measurements. For the main effects of SD, birds raised at high SD had less (p < 0.01) BW, BW gain, and feed intake with increasing stress responses including greater blood H:L and feather CORT concentrations (p < 0.01) than those raised at low SD. Transepithelial electrical resistance in the jejunal mucosa was decreased (p < 0.05) at high SD, indicating an increase in intestinal permeability. However, the main effects of dietary supplementation of 200 mg/kg vitamin C were insignificant for all measurements. In conclusion, high SD of broiler chickens impairs growth performance and intestinal barrier function with increasing stress responses. However, dietary supplementation of vitamin C may have little beneficial effects on broiler chickens raised at the high SD condition used in the present study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.492-498
• /
• 2021

This feasibility study evaluated an optically transparent planar antenna using liquid salt-water as the conducting material. The most significant reason behind using liquid salt-water for transparent antenna applications is its excellent average optical transparency (OTav) (> 95% at a salinity of 40 ppt) compared to other typical solid transparent thin-film electrodes, such as indium tin oxide (ITO:> 73%) or multi-layer films (MLF: > 78%). Each conductive arm of the proposed dipole is constructed from a salt-water layer held between two clear planar acrylic layers (��r = 2.61, tan�� = 0.01, OTav > 90%) (acrylic/salt-water/acrylic; ASA) due to surface tension. To examine the electrical and optical properties of the ASA structure, the surface tension was measured to determine the thickness of the salt-water layer that finalized its sheet resistance and OTav. The average gain and efficiency of the antenna were 1.72 dBi and 74%, respectively, in the operating UHF (Ultra high frequency) band (470-771 MHz). Therefore, the proposed antenna can be a good candidate for applications as a transparent planar antenna using salt-water.

• Clean Technology
• /
• v.28 no.4
• /
• pp.278-284
• /
• 2022

This study presents an excellent planar heater based on low-dimensional composites. By optimizing the ratio of 1D carbon nanotubes (CNT) and 2D MXene (Ti₃C₂T_X), it is possible to create a planar heater that has superior electrical conductivity and high heat generation characteristics. Low-dimensional composites were prepared by mixing CNT paste and MXene solution with eco-friendly waterborne polyurethane (WPU). In order to find the optimal mixing ratio for the MXene-CNT-WPU composites, samples with MXene to CNT weight ratios of 3:1, 1:1, 1:3, 1:7, and 1:14 were investigated. In addition to these different weight ratios, 5 wt% WPU was equally applied to each sample. It was confirmed that the higher the weight ratio of CNT, the lower the sheet resistance and the higher the heating temperature. In particular, when the MXene-CNT-WPU planar heater was fabricated by mixing MXene and CNT at a weight ratio of 1:7 and 1:14, the heating temperature was higher than the heating temperature of a CNT-WPU planar heater. These characteristics are due to the optimized mixture of the 1D materials (CNT) and the 2D materials (MXene) causing the formation of a flat surface and a dense network structure. The low-dimensional composites manufactured with the optimized mixing ratios found in this study are expected to be applied in flexible electronic devices.

• Journal of Korean Society of Forest Science
• /
• v.112 no.3
• /
• pp.382-392
• /
• 2023

Recent reports have indicated a rapid increase in the frequency of sediment disasters due to climate change and other changes in the geological environment. Given this alarming situation and the recent increase in the frequency of land creep in Korea, systematic and efficient recovery and management of land creep areas is essential. The purpose of this study is to identify disaster vulnerability by conducting a physical exploration of land creep in San 4-1, Jayeon-ri, Gaegun-myeon, Yangpyeong-gun, Gyeonggi-do, and examine stability by identifying the overall geological structure of the affected ground. In addition, drilling surveys are conducted to verify the reliability of the measured data. The results of the study reveal that low specific resistance abnormalities are distributed in the upper part of the soil layer and weathering zone and that this section is a 50-120 m exploration line. It is also confirmed to be a low-hardness ground area where tensile cracks are observed. Therefore, there is a need for research focused on developing measures to reduce economic and social damage within the domestic context by continuously monitoring indicators of land creep and identifying land creep risks.