• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.719-725
• /
• 2013

Northeast Asia region is becoming the hub of world trade with China as the center. Integration of this region's economy is now visualized, domestic trade and international division of labor will be more invigorated. Especially on electrical and electronics industry is a large proportion of the trading volume between Korea and China and now, Present condition of electrical and electronics trading industry can effect on whole trading industry. In this study, conducting analysis of the current Korea-China electrical and electronics industry trading and advanced research, and find out the implication to trading volume with the panel analysis. As the results Korean/Chinese GDP, revealed comparative advantage, and foreign direct investment have an effect on the trading volume.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.159-166
• /
• 2003

The winding insulation of low-voltage induction motors in adjustable-speed drive system with voltage-fed Inverters is substantially stressed due to the uneven voltage distribution and excessive voltage stress (dv/dt), which result in the premature insulation breakdown In this paper, the detailed insulation test results of 26 low-voltage induction motors are presented. Six different types of insulation techniques are applied to 26 motors. The insulation characteristics are analyzed with partial discharge, discharge inception voltage, AC current, and dissipation factor tests Also, insulation breakdown tests by high voltage pulses are performed, and the corresponding breakdown voltages obtained.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.980-988
• /
• 2019

When compared with traditional power frequency generators, the frequency of a super high-speed permanent magnet generator (SHSPMG) is a lot higher. In order to study the influence of frequency on the electromagnetic field of SHSPMGs, a 60000rpm, 117kW SHSPMG was taken as a research object. The two-dimensional finite element model of the generator was established, and the two-dimensional transient field of the generator was simulated. In addition, a test platform of the generator was set up and tested. The reliability of the simulation was verified by comparing the experiment data with that of the simulation. Then the generator electromagnetic field under different frequencies was studied, and the influence mechanism of frequency on the generator electromagnetic field was revealed. The generator loss, voltage regulation rate, torque and torque ripple were analyzed under the rated active power load and different frequencies. The influences of frequency on the eddy current density, loss, voltage regulation rate and torque ripple of the generator were obtained. These conclusions can provide some reference for the design and optimization of SHSPMGs.

• Journal of Power Electronics
• /
• v.2 no.4
• /
• pp.268-277
• /
• 2002

Power electronics is an interdisciplinary area that is interstitial to all of the major disciplines of electrical engineering including power, electronics and control. Today, the covering field of power electronics has more widely spread out with the help of ever evolving microelectronics and computer science. Whereas, in Japan the tendency is becoming remarkable nowadays that science, especially "mathematics" and "hardware work", are falling into disfavor with the young people. For these reasons, it has become a very important problem to find out "what are the truest essentials of power electronics\ulcorner" and "How to give students incentives to learn power electronics\ulcorner " from an educational point of view In under-graduate and graduate courses in universities. On the other hand, the power electronics engineers in companies are always required to comply with the ever changing trend of global and open market. However, it takes long time to cultivate their skills. Against the background, "The Cooperative Research Committee on Education of Power Electronics" was established in the IEEJ Industry Applications Society during 2000-2001. The present status of the power electronics education in Japan is surveyed in this paper, and some problems with remedy are pointed out based on the discussions performed in the committee.sed on the discussions performed in the committee.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.569-572
• /
• 1999

As the industry has been growing rapidly, the problem of environmental pollution has been on the rise seriously. In this paper, we used solar cells at the power supply unit of the equipment, which has been sold at present, for measuring the quality of water in order to complement the problem. Also, to get rid of the inconvenience that the examiners must go to the job site, check and collect the polluted water we set the goal at designing the water pollution alarm system which measures the quality of water automatically using one-chip microprocessor and materializing the program.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.465-468
• /
• 2003

In industry areas, a lot of factories and process plants need network for processing data acquired from field and for communicating between sensors or actuators or field controllers. Most of the industry networks are based on wired solutions. But, recently, a lot of factories and process plants are moving into wireless solutions since they have some advantages compared with wired one. In this paper we first review the characteristics of wired and wireless network technologies and introduce the new technique called wireless sensor network (WSN). And then we describe the wireless sensor node system designed by us for WSN which has the ability of small size, flexibility and low-power consumption and embedded into the Bar-code scanner to communicate each other. Finally, we conclude this paper by showing that wireless industry network can be constructed with wireless sensor network without large change of traditional wired topologies through experiment using wireless sensor nodes.

• Journal of Power Electronics
• /
• v.11 no.6
• /
• pp.864-869
• /
• 2011

This paper presents a sensorless control and parameter estimation strategies for a Transverse Flux Rotating Motor (TFRM). The proposed sensorless control method is based on a Model Reference Adaptive System (MRAS) to estimate the stator flux. Parameter estimation theory is also applied into the sensorless control method to estimate motor parameters, such as inductances. The effectiveness of the proposed methods is verified by some simulations and experiments.

• Journal of Power Electronics
• /
• v.7 no.3
• /
• pp.181-190
• /
• 2007

This paper presents a novel circuit topology of a DC bus line series switch and parallel snubbing capacitor-assisted soft-switching PWM full-bridge inverter type DC-DC power converter with a high frequency planar transformer link, which is newly developed for high performance arc welding machines in industry. The proposed DC-DC power converter circuit is based upon a voltage source-fed H type full-bridge soft-switching PWM inverter with a high frequency transformer. This DC-DC power converter has a single power semiconductor switching device in series with an input DC low side rail and loss less snubbing capacitor in parallel with the inverter bridge legs. All the active power switches in the full-bridge arms and DC bus line can achieve ZCS turn-on and ZVS turn-off transition commutation. Consequently, the total switching power losses occurred at turn-off switching transition of these power semiconductor devices; IGBTs can be reduced even in higher switching frequency bands ranging from 20 kHz to 100 kHz. The switching frequency of this DC-DC power converter using IGBT power modules can be realized at 60 kHz. It is proved experimentally by power loss analysis that the more the switching frequency increases, the more the proposed DC-DC power converter can achieve a higher control response performance and size miniaturization. The practical and inherent effectiveness of the new DC-DC converter topology proposed here is actually confirmed for low voltage and large current DC-DC power supplies (32V, 300A) for TIG arc welding applications in industry.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.695-703
• /
• 2017

In order to satisfy the urgent requirements for the overheating protection of induction motors, an approach that can be used to identify motor temperature has been proposed based on the rotor slots harmonic (RSH) in this paper. One method to accomplish this is to improve the calculation efficiency of the RSH by predicting the stator winding distribution harmonic order by analyzing the harmonics spectrum. Another approach is to increase the identification accuracy of the RSH by suppressing the influence of voltage flashes or current surges during temperature estimation based on model predictive control (MPC). First, an analytical expression of the stator inductance is extracted from a steady-state positive sequence motor equivalent circuit model developed from the rotor flux field orientation. Then a procedure that applies MPC for reducing the identification error of the rotor temperature caused by voltage sag or swell of the power system is given. Due to this work, the efficiency and accuracy of the RSH have been significantly improved and validated our experiments. This work can serves as a reference for the on-line temperature monitoring and overheating protection of an induction motor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.5
• /
• pp.353-357
• /
• 2010

Recently, silicon etching have received much attention for display industry, nano imprint technology, silicon photonics, and MEMS application. After the etching process, removing of etch mask and residue of sidewall is very important. The investigation of the etched mask removing was carried out by using the ashing, HF dipping and acid cleaning process. Experiment shows that oxygen component of reactive gas and photoresist react with silicon and converting them into the mask fence. It is very difficult to remove by using ashing or acid cleaning process because mask fence consisted of Si and O compounds. However, dilute HF dipping is very effective process for SiOx layer removing. Finally, we found optimized condition for etched mask removing.