• 제목/요약/키워드: electric power rates

검색결과 205건 처리시간 0.029초

A CASE STUDY ON INVESTMENT EVALUATION OF A PRIVATE SECTOR PROJECT WITH GEOTECHNICAL RISKS

  • Yoshiki Onoi;Hiroyasu Ohtsu
    • 국제학술발표논문집
    • /
    • The 1th International Conference on Construction Engineering and Project Management
    • /
    • pp.824-829
    • /
    • 2005
  • This paper focuses on construction cost volatility for the purpose of private sector investment by use of a financial model with key indices of IRR and DSCR (Debt Service Coverage Ratio). A case project, 1,000 MW pumped storage hydropower plant, has shown that its financial impacts by cost volatility of underground works are less measured than interest rates impacts by interest rate of loans. Probabilistic analysis of costs under geotechnical conditions has been made by Indicator Kriging method. And, in the modeling of interest rates, geometric Brownian motion has been applied. Both of these impacts are measured on the same financial model.

  • PDF

전산실에서의 고조파 분석 (Analysis of the Harmonics on the Power Line in the Computer Room)

  • 노덕남;어익수
    • 한국산학기술학회논문지
    • /
    • 제13권12호
    • /
    • pp.6052-6059
    • /
    • 2012
  • 본 논문에서는 전산실 파워라인의 고조파 문제를 다룬다. 전산실 UPS의 부하 측 각 상의 전압 및 전류는 한국전력공사 전기공급 약관의 규제치 전압 왜형률 5%와 전류 왜형률 5%, 그리고 KS C 4310 의 무정전 전원장치인 UPS의 출력측 고조파 전류 한도 5% 이하를 만족시켜야 한다. 그러나 측정 결과 전압 왜형률은 0.86%로 한국전력공사 규제치에 부합하나, 전류 왜형률은 34.98%로 한국전력공사 규제치인 5%를 초과하여 부적합하였다. 이에 대한 대책으로 AC필터를 설치한 결과 전류 왜형률이 15.22%로, 기준 값 이내에는 미치지 못하였으나 본래의 34.98%에서 절반에 가까운 수준에는 근접 하는 효과가 있었다.

OPERATIONAL EXPERIENCE OF A TWO-DOSIMETER ALGORITHM FOR BETTER ESTIMATION OF EFFECTIVE DOSE AT KOREAN NUCLEAR POWER PLANTS

  • Kim, Hee-Geun;Kong, Tae-Young
    • Journal of Radiation Protection and Research
    • /
    • 제34권4호
    • /
    • pp.165-169
    • /
    • 2009
  • Two dosimeters are provided to radiation workers participating in tasks where high radiation exposure is expected during maintenance at nuclear power plants. At Korean nuclear power plants, two dosimeters are currently provided for tasks where exposure rates exceed 1 mSv/hr, the difference of equivalent dose to specific parts of the body is more than 30% and an exposure of more than 2 mSv is expected in a single task. These conditions for the provisioning of two dosimeters are based on previous field test results, and it is recommended that the dosimeters be worn on the chest and back. It was also found that the workers felt it was more convenient when they wore two dosimeters on chest and back rather than on chest and head. After the application of previous field test results to practice, it was found that the calculated effective dose for workers during radiation work was lower than the maximum dose of chest or back dosimeter by approximately 10%-30%. This performance is regarded not only to meet the international guideline but also to provide convenience for workers during radiation work.

이색 사출성형기 개발을 위한 유압시스템의 특성 검토 (Characteristics Analysis of the Fluid Power System for a Double-color Injection Molding Machine Development)

  • 장주섭
    • 유공압시스템학회논문집
    • /
    • 제8권4호
    • /
    • pp.24-31
    • /
    • 2011
  • Double-color Injection molding machine is the assembly of many kinds of mechanical, fluid power part and electric electronic control system. From in these, fluid power is a part where becomes the first core of this machine. Fluid power systems of double-color injection molding machine are modelled and analyzed using a commercial program AMESim. Partial system models which is divided according to functional operation are made and its analysis results shows how design parameters work on operational characteristics like pressure, flow rates, displacement at each node and so on. Analysis modeling and compared the data which gets from experiment and the analysis result which has a reliability got data. The results made by analysis will be used design of fluid power circuit for developing a double-color injection molding machine.

천연가스 유량변화에 따른 터보팽창기 감압시스템 운전 최적화에 관한 연구 (A Study on the Operational Optimization of Turbo-Expander Pressure Reduction System to the Natural Gas Flow Rates)

  • 유한빛;김효
    • 한국가스학회지
    • /
    • 제19권6호
    • /
    • pp.72-79
    • /
    • 2015
  • 천연가스 감압기지에 터보팽창기 감압시스템을 도입하여 천연가스의 감압과정에서 전기에너지를 생산할 수 있다. 터보팽창기의 효율은 천연가스의 유량과 터보팽창기 설계유량의 비에 따라 달라진다. 따라서 터보팽창기로 들어가는 유량을 조절함으로써 감압시스템을 운전하기 위한 최적조건을 결정할 수 있다. 본 연구에서는 두 곳의 저압 정압기지에서 천연가스의 압력이 17.5 bar에서 8.5 bar로 감압될 때 천연가스의 유량에 따라 생산 가능한 전력을 계산하고 계산결과의 비교를 통해 터보팽창기 감압시스템이 최적으로 운전되기 위한 조건을 찾았다. 천연가스의 평균 유량이 크고 유량의 변화가 작을 때 터보팽창기가 효율적으로 운전되었고 터보팽창기의 설계유량은 천연가스의 유량을 가장 많이 포함하는 용량에서 결정되었다. 선정된 두 정압기지에서 회수 가능한 전력생산량은 9 MW(B 기지), 12 MW(D 기지)로 추산되었다.

전력소비와 산성가스 배출량과의 관계 (Relationship of Electricity Consumption and Emission Rate of Acidic Gases)

  • 정일록;김대곤
    • 환경위생공학
    • /
    • 제10권3호
    • /
    • pp.131-138
    • /
    • 1995
  • As the energy consumption increases continuously, the emission amount of air pollutants is growing, and after all it can influence the global environment as welt as the regional atmosphere. So, the clean energy which emits less air pollutants should be developed and widely used to reduce emission of pollutants. Electricity, known for clean energy in the side of consumption, is not actually clean in the process of generation. Electric power is generated using fossil fuels which produce acidic gases like $SO_{2}$, $NO_{x}$, etc. The emission rates of $SO_{2}$, $NO_{x}$, $CO_{2}$ are 2g,0.78g and 1 l0g per electric power generating Ikwh. If one light(60 watt bulb) be turned off at each house for a month electricity will be saved about 1.Skillion kwh a year. This is almost the same as 4,170 tons of $SO_{2}$ and $NO_{x}$. As a result the economization of electricity will be one of the effective strategy to reduce the air pollution and to keep our life clean and comfortable.

  • PDF

대지경사각을 고려한 차례실패 사고율 검토 (Calculations of Shielding Failure Rates According To The Hillside Angles)

  • 강연욱;곽주식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.615-617
    • /
    • 2005
  • 대기중에 위치한 뇌운안에 전하가 떠다니는 상태에서는 구름안과 주변에 높은 전계의 전위가 발생한다. 이 전하가 축적되면 대지 방전이 발생하고 송전선로 등에 뇌격이 침입하게 된다. 뇌 방전은 수 km에 달하는 대기중에 발생하는 거대한 전기현상이지만 이 낙뢰가 전기의 흐름이라는 것은 벤자민 프랭클린의 현장 시험에 대해 최초로 증명되었다. 이러한 대기중에 발생하는 거대한 전기현상인 낙뢰가 송전선로에 침입하여 송선선로 애자련을 섬락시키는 과정은 대단히 복잡한 전자기적인 현상이다. 그것은 가스 방전 현상, 감속에 중요한 역할을 하는 전자계의 빠른 변화, 도체와 철탑에 나타나는 코로 나와 관련된 비선형 효과 및 주파수 및 전류와 관련된 대지의 임피던스 통 다양한 현상이 종합적으로 관련된다. 따라서 가공 송전선로의 낙뢰에 대한 동작특성의 평가시 낙뢰 현상의 불규칙한 특성 및 신뢰할만한 데이터의 부족에 따른 많은 불확실성이 존재한다. 이 때문에 가공 송전선로에서 낙뢰에 의한 트립(Trip) 사고수의 계산을 위해 단순화된 방법이 아주 유용하며 효과적일 수 있다. 본 논문에서는 EGM (Electrogeometric Model) 모델을 사용하여 대지경사자의 크기에 따른 차폐실패 트립 사고율의 영향을 검토하였다.

  • PDF

낙뢰에 의한 송전선로의 차폐실패 사고율 계산 알고리즘 검토 (The Study on the Calculation Algorism of Lightning Shielding Failure Outage Rates)

  • 강연욱;곽주식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
    • /
    • pp.621-623
    • /
    • 2005
  • 산업이 고도화되고 전력수요가 증가함에 따라 전력의 안정적인 공급에 대한 국민들의 요구가 점점 증가하고 있다. 그러나 전력을 수송하는 대부분의 송전선로는 가공 송선선로로서 낙뢰에 의한 고장에 노출되어 있어 한전에서는 이를 최소화하려는 노력을 하고 있다. 현재 한전에서는 년간 100km당 1건 이내로 낙뢰에 의한 고장을 제한하는 것을 목표치로 설계하여 운영하고 있으나 낙뢰에 의한 고장을 더욱 감소시키기 위하여 각종 내뢰 시책을 시행하고 있다. 이를 위해서는 근본적으로 낙뢰에 의한 송전선로의 고장을 가능한한 정확하게 예측하는 것이 중요하며, 본 논문에서는 낙뢰 고장 예측 계산을 위해 중요한 요소인 차폐실패 고장률 계산 알고리즘을 검토하고자 한다.

  • PDF

전력거래를 위한 계통운전 상태에서의 모선가격산정 및 분해알고리즘의 개발에 관한 연구 (A Study on the Development of Decomposition Algorithm and calculation of Nodal Price on Power System Operation)

  • 김용하;이범;최상규;이재걸;연준희;황봉수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 A
    • /
    • pp.621-623
    • /
    • 2003
  • This Paper provides the Effect of Nodal Price and decomposed Element in Power System Operation. This Effect can be applied in the Estimation of Electric rates because the Electric market will be Competitive Market. The proposed concept is applied to 6bus test system and proved importance.

  • PDF

전력구내 지중케이블 강제냉각에서의 적정냉각구간에 관한 연구 (A Study on the Optimum Cooling Span of the Underground Power Transmission Cable Equipped by a Forced Cooling System)

  • 이재헌;정상호;김재근;박만홍
    • 설비공학논문집
    • /
    • 제2권1호
    • /
    • pp.49-62
    • /
    • 1990
  • The forced cooling system has been widely applied to passing more electric current in the underground power transmission cable technology. In this paper, the optimum cooling span of the in-trough-indirect water cooling method within an electric tunnel was investigated. A parametric study was performed for the cable currents, the coolant flow rates, and the coolant inlet temperatures. As a result, the temperature of the inlet air has been found as the most important parameter in determination of the optimum cooling span.

  • PDF